s3 problem , why moving ? - page 14.

Unacceptable

legendary

Activity: 2212

Merit: 1001

Is the heatsink loose Huh

Does it look like it moved (shifted,compare with the other side).Check the screws,if loose,tighten them very gently.Again compare tightness with the other side heatsink screws.

If not,then look real close,again comparing to the other side,to see if any components are missing,take your time looking.

If all looks well,plug it in & see if it runs,watch carefully for any sparks/smoke,if it does sparks/smoke,unplug it as fast as you can.

I've never seen a heatsink lose a fin,but anything is possible.

Those pics are not very clear,borrow a better camera from a friend & post CLEAR,high resolution (2650x1920 preferred) pictures of where the fin came off so we can see,if you want folks to help,before you power it up Wink

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: notlist3d on April 12, 2015, 03:57:33 AM

Quote from: ToQcHista on April 12, 2015, 03:52:54 AM

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation. If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided. Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin. We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again. I suggest getting the "PSu and router." and seeing if it works.

what take photo that tell me will turn on s3 if not ?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 12, 2015, 03:52:54 AM

problem is this that may other some damage ? if this aluminium that piece ?

Like in other thread I think we are losing something in translation. If not you are almost reaching trolling levels with multiple post for every issue, and asking questions that cannot solved with info provided. Just like the 2 threads you had on using a paperclip to start a psu.

Yes it could or could not have damage other the one fin. We cannot properly inspect it from a picture, especially a picture in low quality.

There is no need to make multiple threads. And post again and again. I suggest getting the "PSu and router." and seeing if it works.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

problem is this that may other some damage ? if this aluminium that piece ?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 12, 2015, 03:48:04 AM

Quote from: notlist3d on April 12, 2015, 03:40:14 AM

Quote from: ToQcHista on April 12, 2015, 01:50:05 AM

Quote from: Amph on April 12, 2015, 01:46:46 AM

Quote from: ToQcHista on April 12, 2015, 01:16:18 AM

Can not understand what the problem is , it Aluminium what do ? I very expensive should pay that send back and after my in country should pay Transportation much money.

One please tell me what the problem is it aluminium that cut ? and else one left from side shaken only one.

before sending it back, you can try if it work, if it work you don't need to send back you can keep it

simple logic, Others can not do nothing should will buy PSu and router.

But I want to know will turn on if not s3 ? Sad

There is no need to create multiple threads on same issue. People will answer it here.

Fact is no one can tell you if it works or not. It is very unusual to have miner take a hit in shipping to break part of heatsink. I suggest you get the router and psu in decent timeframe as if it is damaged in shipping the sooner you report it the better.

i will buy PSU & router and try if working .

But such Neccessary is this part ?

i think that it piece Nothing is.

I think the issue is not that it's missing one fin. But the fact it happened in shipping. Making me think it took a hard hit. The unit looked scuffed in video. So we cannot really tell if it was a unit not taken care of, or if again it took a big hit in shipping which could not be good.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: notlist3d on April 12, 2015, 03:40:14 AM

Quote from: ToQcHista on April 12, 2015, 01:50:05 AM

Quote from: Amph on April 12, 2015, 01:46:46 AM

Quote from: ToQcHista on April 12, 2015, 01:16:18 AM

Can not understand what the problem is , it Aluminium what do ? I very expensive should pay that send back and after my in country should pay Transportation much money.

One please tell me what the problem is it aluminium that cut ? and else one left from side shaken only one.

before sending it back, you can try if it work, if it work you don't need to send back you can keep it

simple logic, Others can not do nothing should will buy PSu and router.

But I want to know will turn on if not s3 ? Sad

There is no need to create multiple threads on same issue. People will answer it here.

Fact is no one can tell you if it works or not. It is very unusual to have miner take a hit in shipping to break part of heatsink. I suggest you get the router and psu in decent timeframe as if it is damaged in shipping the sooner you report it the better.

i will buy PSU & router and try if working .

But such Neccessary is this part ?

i think that it piece Nothing is.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 12, 2015, 01:50:05 AM

Quote from: Amph on April 12, 2015, 01:46:46 AM

Quote from: ToQcHista on April 12, 2015, 01:16:18 AM

Can not understand what the problem is , it Aluminium what do ? I very expensive should pay that send back and after my in country should pay Transportation much money.

One please tell me what the problem is it aluminium that cut ? and else one left from side shaken only one.

before sending it back, you can try if it work, if it work you don't need to send back you can keep it

simple logic, Others can not do nothing should will buy PSu and router.

But I want to know will turn on if not s3 ? Sad

There is no need to create multiple threads on same issue. People will answer it here.

Fact is no one can tell you if it works or not. It is very unusual to have miner take a hit in shipping to break part of heatsink. I suggest you get the router and psu in decent timeframe as if it is damaged in shipping the sooner you report it the better.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: Amph on April 12, 2015, 01:46:46 AM

Quote from: ToQcHista on April 12, 2015, 01:16:18 AM

Can not understand what the problem is , it Aluminium what do ? I very expensive should pay that send back and after my in country should pay Transportation much money.

One please tell me what the problem is it aluminium that cut ? and else one left from side shaken only one.

before sending it back, you can try if it work, if it work you don't need to send back you can keep it

simple logic, Others can not do nothing should will buy PSu and router.

But I want to know will turn on if not s3 ? Sad

Amph

legendary

Activity: 3248

Merit: 1070

Quote from: ToQcHista on April 12, 2015, 01:16:18 AM

Can not understand what the problem is , it Aluminium what do ? I very expensive should pay that send back and after my in country should pay Transportation much money.

One please tell me what the problem is it aluminium that cut ? and else one left from side shaken only one.

before sending it back, you can try if it work, if it work you don't need to send back you can keep it

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

your will see this video >

https://www.youtube.com/watch?v=RQVI3avGLhU&feature=youtu.be

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Can not understand what the problem is , it Aluminium what do ? I very expensive should pay that send back and after my in country should pay Transportation much money.

One please tell me what the problem is it aluminium that cut ? and else one left from side shaken only one.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: Mikestang on April 11, 2015, 11:05:00 PM

Quote from: ToQcHista on April 11, 2015, 04:14:14 PM

heatsink's Security is.The piece alumine was left from side.

owner tell me this "it was running when I unplugged it to send it to you! If not we will send you a different one. "

Have them send you a different one, and ask them to package it better.

That is safest bet. I would try to do it within a decent amount of time, you should get the supplies to test it. It might work, but to take a hit hard enough to break off fin from heatsink sounds pretty bad.

If it's like normal amazon items report it to amazon and the will be very helpful.

Mikestang

legendary

Activity: 1274

Merit: 1000

Quote from: ToQcHista on April 11, 2015, 04:14:14 PM

heatsink's Security is.The piece alumine was left from side.

owner tell me this "it was running when I unplugged it to send it to you! If not we will send you a different one. "

Have them send you a different one, and ask them to package it better.

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 11, 2015, 04:14:14 PM

heatsink's Security is.The piece alumine was left from side.

owner tell me this "it was running when I unplugged it to send it to you! If not we will send you a different one. "

Does it look like it did damage to the miner? Being shipped and having a loose metal object in miner is not ideal.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

heatsink's Security is.The piece alumine was left from side.

owner tell me this "it was running when I unplugged it to send it to you! If not we will send you a different one. "

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 11, 2015, 04:09:09 PM

my s3 , will turn on if not ?

With pictures we cannot answer this. You would need to inspect it in person. Pieces breaking off is not a good sign as far as it's being handled good in shipping.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

my s3 , will turn on if not ?

notlist3d

legendary

Activity: 1456

Merit: 1000

Quote from: ToQcHista on April 11, 2015, 03:43:10 PM

Quote from: Amph on April 11, 2015, 03:32:49 PM

Quote from: ToQcHista on April 11, 2015, 03:09:07 PM

i open s3 and i see that this Missing one piece . is this problem ?

http://www.picz.ge/img/s2/1504/12/c/c823585857ec.jpg

it should not cause any major issue, as long as the heatsink is still there, but i would return it anyway, because something like this could happen only if the package ghas been damaged in the shipping, probably the miner will not work as intended...

i owner wrote this > "Ok it looks like that is just a fin blade. You don't need it. You can simply unscrew the top and pull it out. Let me know if you have any problems well doing it. " and this "it was running when I unplugged it to send it to you! If not we will send you a different one. "

As long as it's just one fin I would not be worried as long as it works. I would be worried about what caused this fin to come loose sounds like miner took a spill hard

Before running I would make sure heatsink is still on secure. It's not something we can tell by picture.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

I have to try s3 if will working . but yet should will buy psu and router.

ToQcHista

member

Activity: 98

Merit: 10

ToQcHista

Quote from: Amph on April 11, 2015, 03:32:49 PM

Quote from: ToQcHista on April 11, 2015, 03:09:07 PM

i open s3 and i see that this Missing one piece . is this problem ?

http://www.picz.ge/img/s2/1504/12/c/c823585857ec.jpg

it should not cause any major issue, as long as the heatsink is still there, but i would return it anyway, because something like this could happen only if the package ghas been damaged in the shipping, probably the miner will not work as intended...

i owner wrote this > "Ok it looks like that is just a fin blade. You don't need it. You can simply unscrew the top and pull it out. Let me know if you have any problems well doing it. " and this "it was running when I unplugged it to send it to you! If not we will send you a different one. "

Topic: s3 problem , why moving ? - page 14. (Read 7186 times)