Topic: [Sell][in stock] HashBuster ASIC Miners - page 9. (Read 72071 times)
Somebody running them without fans? Asic usb sticks also run ok without fan...
Thanks for your tip, but one question about it
What do you mean by a protective layer on the opposite side of card "behid chip" ? Is there are plastic something/sticker between the heatsink and chip? I assumed they use a special (cooling)paste to keep the heatsink attached to the chip, not some kind of sticker.
What do you mean by a protective layer on the opposite side of card "behid chip" ? Is there are plastic something/sticker between the heatsink and chip? I assumed they use a special (cooling)paste to keep the heatsink attached to the chip, not some kind of sticker.
I scraped off green protective coating at small square and glowed heatsink by 3M Thermal Heatsink Tape.
I think that my heatsink is too BIG for this card but i don't have smaller one
I see heatsink at the chip. If you want to increase the voltage and hashrate more, then I recommend to remove a protective layer on the opposite side of card "behid chip" and put another heatsink. I think it's more important than the heatsink on the plastic body of chip.
my 3 "old" board have a heatsink atthe chip, the 7 new board don't have a heatsink. For now I won't modify these boards. Maybe I order an extra spare one to experiment with.
Thanks for your tip, but one question about it
What do you mean by a protective layer on the opposite side of card "behid chip" ? Is there are plastic something/sticker between the heatsink and chip? I assumed they use a special (cooling)paste to keep the heatsink attached to the chip, not some kind of sticker.
I will check it this evening.
I see heatsink at the chip. If you want to increase the voltage and hashrate more, then I recommend to remove a protective layer on the opposite side of card "behid chip" and put another heatsink. I think it's more important than the heatsink on the plastic body of chip.
nice setup man
i just got the 5 i ordered today,
found out some of the fans i had in storage aint working.
so i got all 5 running hooked up to a tiny little 80mm fan untill i can get some more.
getting them running in win8 with the oracle virtualbox was pretty ez, getting about 2.8ghs from each atm. might play around with oc etc.
but i think ill wait for some cooling to arrive, i dont want to come home from work and find the house burnt down x)
i just got the 5 i ordered today,
found out some of the fans i had in storage aint working.
so i got all 5 running hooked up to a tiny little 80mm fan untill i can get some more.
getting them running in win8 with the oracle virtualbox was pretty ez, getting about 2.8ghs from each atm. might play around with oc etc.
but i think ill wait for some cooling to arrive, i dont want to come home from work and find the house burnt down x)
I already owned 3 pieces, today another 7 boards arrived 
Build me a nice tower, hashing now @ 28Gh/s
http://miningonmyown.com/2013/10/23/hashbuster-nano-10pcs-tower/
Build me a nice tower, hashing now @ 28Gh/shttp://miningonmyown.com/2013/10/23/hashbuster-nano-10pcs-tower/
Also ordered 10 of them...and received a tracking the same day...can't wait to screw around in the basement again
5 nano`s ordered. will post update when i recieve them
Edit:
just got a tracking number, damn that was fast
less then 12 hours
Edit:
just got a tracking number, damn that was fast
less then 12 hours
whats the euro / usd price on these? bitcoin keeps fluctuating allot 
and any news on getting them "plug n play" with cgminer / bfgminer ?
and any news on getting them "plug n play" with cgminer / bfgminer ?
I really want to buy a few of these, but will NEVER figure out how to compile a thing :\
how could I get it to run?
Run it as root (sudo ./cgminer ...), or better change permissions of /dev/hidraw* (chmod 666 /dev/hidraw*).
HELP!
Actually I found out one more thing:
when I use the cgminer_usb from the virtual machine image, I get no connection to the server but it does boot up correctly:
https://www.dropbox.com/s/bw6n42uic6s6rep/Screenshot%202013-10-15%2009.46.55.png
But the ping from the terminal goes through. And in the browser opens the page. A worker is available from another computer.
Firewall and antivirus disabled.
But when I compile the cgminer my self (and install with make install) and use the command "cgminer - o -p etc
I get a crash see here:
https://www.dropbox.com/s/s61a42yv8pz2x2h/Screenshot%202013-10-16%2012.07.53.png
how could I get it to run?
Actually I found out one more thing:
when I use the cgminer_usb from the virtual machine image, I get no connection to the server but it does boot up correctly:
https://www.dropbox.com/s/bw6n42uic6s6rep/Screenshot%202013-10-15%2009.46.55.png
But the ping from the terminal goes through. And in the browser opens the page. A worker is available from another computer.
Firewall and antivirus disabled.
But when I compile the cgminer my self (and install with make install) and use the command "cgminer - o -p etc
I get a crash see here:
https://www.dropbox.com/s/s61a42yv8pz2x2h/Screenshot%202013-10-16%2012.07.53.png
how could I get it to run?
Would like to buy a few of these bad boys!!
I emailed you all but haven't heard back yet.
I am sure you all are very busy making the next top miners on the market!
But I would be much obliged if I could order a few of thees units !!
JoRoidx
I emailed you all but haven't heard back yet.
I am sure you all are very busy making the next top miners on the market!
But I would be much obliged if I could order a few of thees units !!
JoRoidx
is compatible with raspberry pi? minepeon?
No not out of the box.Thanks for the info
is compatible with raspberry pi? minepeon?
No not out of the box.
is compatible with raspberry pi? minepeon?
Any news on hashbuster giga units?
full member
Activity: 201
Merit: 100
https://mtvpv-banners-live.s3.amazonaws.com/banne
MP!!
Thank you! Good work!
Jump to: