I have a dl link the address is 192.168.0.1
okay
try 192.168.0.255 for the ipv4 broadcast
Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 94. (Read 452359 times)
okay
try 192.168.0.255 for the ipv4 broadcast
I have a dl link the address is 192.168.0.1
getting really pissed off I can get this to mine.
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
Also, what is your router ip address? That should go into IPv4 gateway. My ipv4 broadcast is number higher than the ipv4 gateway
In your case 192.168.0.2
getting really pissed off I can get this to mine.
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
Try 8.8.8.8 for your custom dns server
okay the 192.168.0.1 for the gateway is my router so I will switch the custom server away from that to 8.8.8.8
getting really pissed off I can get this to mine.
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
Try 8.8.8.8 for your custom dns server
So even though I can log onto the miner on 3 mac minis 4 pc's and a laptop. a total of 8 different computers. I can't seem to get it connect to and mining at btcguild.
my miner shows no hash
my miner shows no hash
getting really pissed off I can get this to mine.
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
okay I got access to the programming and I named the miner. so this lets me access the miner on any of my pc's and mac mini's in my home.
IPv4 address 192.168.0.111
IPv4 netmask 255.255.255.0
IPv4 gateway 192.168.0.1
IPv4 broadcast 'blank'
Use custom Servers 192.168.0.1
Hello,
Just wondering.. how many antminers would I be able to attach to a Dell 930W Server PSU? (230V)
Just wondering.. how many antminers would I be able to attach to a Dell 930W Server PSU? (230V)
2 of them
I was at eligius but have moved to 50BTC now.. Eligius has payment issues..
Problem is still same..
Problem is still same..
Don't mine at 50BTC, they say they got hacked last year.
They still own miners a lot BTC, which they aren't going to pay.
Hello,
Just wondering.. how many antminers would I be able to attach to a Dell 930W Server PSU? (230V)
Just wondering.. how many antminers would I be able to attach to a Dell 930W Server PSU? (230V)
hey i have PSU Antec VP500PC
it has 408[W] on 12v but on 2 rails 21A and 24A, is it ok for antminer?
or does it have to be on single rail?
it has 408[W] on 12v but on 2 rails 21A and 24A, is it ok for antminer?
or does it have to be on single rail?
I have got 4 Antminers and 2 of them are getting x for 2 chips.. It is since day 1 and doesnt become o when restarted.
Please tell me what to do
Please tell me what to do
Are you mining at eligius? I had the same problem and tried everything, but the xx just kept showing until I changed the pool. Running 20 hours + now, still no xx.
I was at eligius but have moved to 50BTC now.. Eligius has payment issues..
Problem is still same..
Just to let anyone know I have a dedicated support team that is working along side Bitmain support to provide round the clock technical support
We provide direct access to technical support to get you back up and running within 1 hour of ticket being open.
We do not provide RMA support or issues with orders
We are technical support and customs advisers
So if you have an issue that needs raised please see
http://bitcoinhardware.co.vu/bitmain/
Cheers folks
We provide direct access to technical support to get you back up and running within 1 hour of ticket being open.
We do not provide RMA support or issues with orders
We are technical support and customs advisers
So if you have an issue that needs raised please see
http://bitcoinhardware.co.vu/bitmain/
Cheers folks
I have got 4 Antminers and 2 of them are getting x for 2 chips.. It is since day 1 and doesnt become o when restarted.
Please tell me what to do
Please tell me what to do
Are you mining at eligius? I had the same problem and tried everything, but the xx just kept showing until I changed the pool. Running 20 hours + now, still no xx.
I have got 4 Antminers and 2 of them are getting x for 2 chips.. It is since day 1 and doesnt become o when restarted.
Please tell me what to do
Please tell me what to do
Did you make sure all the ribbon cables are connected tightly?
Yeah ribbon cables are good.
I'm thinking I might try reversing the thing tonight, i.e. power the system board from the other blade, and shift the fan to the other side and see what happens.
Can't think of anything else. I guess maybe try and flash the firmware?, factory reset didn't do anything though...
Just an update, it's started hashing now but it's fan is still on max, 4200 constant and a constant 35 Celsius, ha.
Would be nice to get the fan to shutup a bit.
Has anyone else had a fan that's constantly maxed out? (non overclocked)
okay
what is the pool setting for btcguild ?
pool = stratum.btcguild.com:3333
worker = phil_btcA
password = [blank]
I think it is working but not sure yet.
what is the pool setting for btcguild ?
pool = stratum.btcguild.com:3333
worker = phil_btcA
password = [blank]
I think it is working but not sure yet.
My two latest Antminers arrived this evening, and I crapped myself a little bit when the fans didn't spin up automatically on power-up.
Seems the latest batches wait for a certain temperature before spinning up.
They have always been like that...its in the setup instructions.Seems the latest batches wait for a certain temperature before spinning up.
Very strange that I haven't noticed that behavior in my prior Ant's. *shrugs*
Did you make sure all the ribbon cables are connected tightly?
Yeah ribbon cables are good.
I'm thinking I might try reversing the thing tonight, i.e. power the system board from the other blade, and shift the fan to the other side and see what happens.
Can't think of anything else. I guess maybe try and flash the firmware?, factory reset didn't do anything though...
My two latest Antminers arrived this evening, and I crapped myself a little bit when the fans didn't spin up automatically on power-up.
Seems the latest batches wait for a certain temperature before spinning up.
Seems the latest batches wait for a certain temperature before spinning up.
They have always been like that...its in the setup instructions.
Jump to: