palawan here we go mate:
http://i.imgur.com/7V6Z6EE.jpg
Topic: [Setup & Troubleshoot] Bitmain AntMiner S1 180GH/S miner - page 92. (Read 452359 times)
Ok just done a reset. This is what it looks now after a reset:
IPv4 address is what i see on a sticker now
What should I put in now?
PS
Thanks for trying to help out guys. I know its hard
IPv4 address is what i see on a sticker now
What should I put in now?
PS
Thanks for trying to help out guys. I know its hard
Not hard at all.
on the PC connected to the internet, did you type the command I told you?
There's no way on the PC that you can get out to the internet on 192.168.1.x reason being that's a class C subnet that can only get out of the broadcast domain through a layer 3 device (gateway/router) and 192.168.2.1 is not on the same subnet and cannot be reached.
I suspect that you connected your antminer to a 2nd NIC on the PC and tried to follow the guide. You're still able to communicate to us here coz your LAN 10.1.1.2 is connected to your router 10.1.1.1 ip default gateway.
but I need confirmation or I'm talking out of my ass, hence the tracert result. For all I know, you have another NIC (wifi) on that PC.
I is a Network Engineer on my day job
Ok just done a reset. This is what it looks now after a reset:
http://i.imgur.com/2oVq65L.jpg
IPv4 address is what i see on a sticker now
What should I put in now?
PS
Thanks for trying to help out guys. I know its hard
http://i.imgur.com/2oVq65L.jpg
IPv4 address is what i see on a sticker now
What should I put in now?
PS
Thanks for trying to help out guys. I know its hard
So he's got 2 networks 
I'll be watching,maybe I'll actually learn something 
My CMD just shows 1 Ethernet Adapter Local Area Connection..................
I'll be watching,maybe I'll actually learn something My CMD just shows 1 Ethernet Adapter Local Area Connection..................
these are all my settings:
does it look good?
*Local Area Connection 2, is there my Miner plugged in
does it look good?
*Local Area Connection 2, is there my Miner plugged in
On your computer that you're typing the message to us here at bitcointalk.
on the command prompt type:
Code:
tracert google.com
and post the result here. I have a feeling your network is 10.1.1.x network. The other LAN card, but I could be wrong.
in which case, you have to change the miner to:
10.1.1.88
255.255.255.0
10.1.1.1 (ip default gateway)
DNS 8.8.8.8
broadcast 10.1.1.255
but after confirming the result of your tracert (trace route is what it stands for)
I used above setting as suggested and when I connect my miner to the interent router nothing happens and I no longer can access configuration window.
What would be the process of just leaving my ant plugged in to computer and not to router?
I guess I'm doing something totally wrong. If you go for a reset button will I lose all my settings?
What would be the process of just leaving my ant plugged in to computer and not to router?
I guess I'm doing something totally wrong. If you go for a reset button will I lose all my settings?
I think I see the problem,your default gateway in that pic is 192.168.2.1 & your miner is 192.168.1.xxx,you need to set your computer & the miner to the same .1 or .2 as your network(router) ,what was your default gateway before you started all this .1.xxx or .2.xxx
Just your PC hooked to your router............& able to connect to the internet.BTW,IPv4 is YOUR IP given by the router or network
Default gateway is the IP of your router,I think I got that right
Looking from your PC in the CMD window,that is supposed to be YOUR router.........Yeah,reset will return your miner to whatever IP is written & all settings resort back to default,may be a good idea to start over anyway
these are all my settings:
http://i.imgur.com/iW6eMjb.jpg
does it look good?
*Local Area Connection 2, is there my Miner plugged in
http://i.imgur.com/iW6eMjb.jpg
does it look good?
*Local Area Connection 2, is there my Miner plugged in
I used above setting as suggested and when I connect my miner to the interent router nothing happens and I no longer can access configuration window.
What would be the process of just leaving my ant plugged in to computer and not to router?
I guess I'm doing something totally wrong. If you go for a reset button will I lose all my settings?
What would be the process of just leaving my ant plugged in to computer and not to router?
I guess I'm doing something totally wrong. If you go for a reset button will I lose all my settings?
I thought you connected only to your PC to change IP from 192.168.2.xxx to 192.168.1.xxx on the miner,then connect the miner to your router.
Here's an easy setup guide:
https://docs.google.com/document/d/155UOVTLYBcNRWTDKAkLLStFbpCMv0eK4f1gkNoyRiZ0/view
Here's an easy setup guide:
https://docs.google.com/document/d/155UOVTLYBcNRWTDKAkLLStFbpCMv0eK4f1gkNoyRiZ0/view
Ipv4 gateway 192.168.1.254
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Done, just updated. My miner is directly connected to computer right now. Is this they right thing?
Yep, set your miner config.
nah. nothing happens. I want to punch my cat in the face now
No, after you set the IP details and miner details you then connect the miner to your router/internet.
Ipv4 gateway 192.168.1.254
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Done, just updated. My miner is directly connected to computer right now. Is this they right thing?
Yep, set your miner config.
nah. nothing happens. I want to punch my cat in the face now
It might not update fully until you reboot the system. Try that. Or power off and back on.
Ipv4 gateway 192.168.1.254
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Done, just updated. My miner is directly connected to computer right now. Is this they right thing?
Yep, set your miner config.
nah. nothing happens. I want to punch my cat in the face now
Ipv4 gateway 192.168.1.254
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Done, just updated. My miner is directly connected to computer right now. Is this they right thing?
Yep, set your miner config.
Ipv4 gateway 192.168.1.254
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Done, just updated. My miner is directly connected to computer right now. Is this they right thing?
Ipv4 gateway 192.168.1.254
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Ipv4 broadcast 192.168.1.255
Custom dns 8.8.8.8
Need help getting my Ant online. I got lost with my IP settings and also don't understand the difference between having my Ant plugged directly to Computer or plug it to my Internet Router.
This is what I see:
http://i.imgur.com/6WDxnJm.jpg
This is what I see:
http://i.imgur.com/6WDxnJm.jpg
For the people who are concerned about the heat, put a fan on the back on the miner to pull the hot air out. I'm overclocked with temps around 45/46. When my next miner comes, i'm stacking them and will have a fan also running across the blades. Would love to get it down under 40C.
Hi guys,
Need some help with accessing my configuration page on a new AntMiner. I already tried changing my IP address setting by following instruction that were mentioned in this topic and still no luck. I just can't seem to login to my little Ant. I tired using IP scanner tool while my Ant was connected and it showed nothing. Is it worth trying to reset it? I'm also unable to find a reset button on my unit, must be blind.
Thanks
Need some help with accessing my configuration page on a new AntMiner. I already tried changing my IP address setting by following instruction that were mentioned in this topic and still no luck. I just can't seem to login to my little Ant. I tired using IP scanner tool while my Ant was connected and it showed nothing. Is it worth trying to reset it? I'm also unable to find a reset button on my unit, must be blind.
Thanks
I had the same problem - reconnected all the cables + reset and it appeared.
The reset button is extremely small - located at the bottom middle of the small controller board
Ty for the advice. I managed to login. Changed IP to 192.168.1.254
perfect
Hi guys,
Need some help with accessing my configuration page on a new AntMiner. I already tried changing my IP address setting by following instruction that were mentioned in this topic and still no luck. I just can't seem to login to my little Ant. I tired using IP scanner tool while my Ant was connected and it showed nothing. Is it worth trying to reset it? I'm also unable to find a reset button on my unit, must be blind.
Thanks
Need some help with accessing my configuration page on a new AntMiner. I already tried changing my IP address setting by following instruction that were mentioned in this topic and still no luck. I just can't seem to login to my little Ant. I tired using IP scanner tool while my Ant was connected and it showed nothing. Is it worth trying to reset it? I'm also unable to find a reset button on my unit, must be blind.
Thanks
I had the same problem - reconnected all the cables + reset and it appeared.
The reset button is extremely small - located at the bottom middle of the small controller board
Its so small its physically hard to make it any smaller. LOL
Hi guys,
Need some help with accessing my configuration page on a new AntMiner. I already tried changing my IP address setting by following instruction that were mentioned in this topic and still no luck. I just can't seem to login to my little Ant. I tired using IP scanner tool while my Ant was connected and it showed nothing. Is it worth trying to reset it? I'm also unable to find a reset button on my unit, must be blind.
Thanks
Need some help with accessing my configuration page on a new AntMiner. I already tried changing my IP address setting by following instruction that were mentioned in this topic and still no luck. I just can't seem to login to my little Ant. I tired using IP scanner tool while my Ant was connected and it showed nothing. Is it worth trying to reset it? I'm also unable to find a reset button on my unit, must be blind.
Thanks
I had the same problem - reconnected all the cables + reset and it appeared.
The reset button is extremely small - located at the bottom middle of the small controller board
Jump to: