Topic: Sixth alt coin thread I forgot to mod last thread. - page 20. (Read 80193 times)

Switch timing of 5 mins is super short imo. It takes a miner from 10 - 30 seconds to start mining and if the top profit coin keeps changing you could be having a lot of downtime.

Personally I keep it at one algo, if something's more profitable by 20% or more I manually switch and check once a day.

Thanks moondoggie - how many cards are you using - I only dedicated 6 1080 Ti's to it -
Also my switch timing was 5min.

Earnings were just super low.

Phill,

I know you and your friend are building up the solar project for mining...

A little something my accountant has brought to my attention to try and better my taxes, since it seems im going to take a killing in taxes with the amount of BTC i earned this year...She was telling me that if you mount the computers to the house/building in a way you cant easily just pick them up, the rigs would fall under the guidelines of a fixture, so you can take advantage of tax laws associated with home fixtures in regards to writeoffs, deductions, and such...

Basically she is telling me to turn my rigs into fixtures going forward, then purchase all new gear under the LLC that is associated with that property i own... that way the business can claim the earnings of the mining gear and you can use more deductions to offset the income to place more in my own pocket.

She said something as simple as a small building (shed build) secured and built to code with the mining gear would allow me to continue to rent out properties and claim the earnings under those same properties, so something to think about with your solar project going forward.

I’m seeing like 40c off prediction per card per day for the past 5 days using sniff

Ya, if this watercooling idea works out, i plan to buy already manufactured watercooled cards going forward. The amount of OC you can pull out of the cards once you get temps down below 50c is just insane nice..., i bought 2 hybrid 1080ti's a while back, but they were damaged in the hurricane bs, just have not bought anymore since.. they worked out well, but boy did those radiators run stinking hot.. but the cards stayed in the high 50's

Yes, i live in Florida....so i dont have to deal with the issues of pipes freezing on me, also if the pipe layout i placed isnt enough, i can easily grow and add more length to the field or add radiators and fans to help. I am unsure how this setup will fair in the summer time with the heat of the day along with more rigs. I am just testing out a concept. I know of people on the watercooling forum that build passive cooled twitch gaming rigs without much issue, so i figured i would give it a try for the mining rigs. I just have poor ventilation in my new house i bought recently in the garage, it has no windows at all, but its located in a area i really like living in and the price was just to good to pass on, so i am trying to figure out a way to manage temps better with the rigs in my garage. Ultimately i am shopping around for land to purchase cheap that already has like a trailer home electric already impacted on the land, so i can place a shipping container on the property and move my mining business mostly out of my home. The geothermal cooling field may move onto my personal gaming rig in the future once i move my mining rigs out.

I need to let this run for a little bit and work out the bugs as i go, a few things im a little unsure about.. the pump i am using is running a little warmer than i expected due to the restriction of trying to force the water through the GPU's @15psi and then dumping excess pressure out the dump valve, i may need to figure out a better way of going about it or maybe use some sort of expansion tank and a pressure switch possibly... idk really yet. The pump is pulling roughly 53watts currently....

For coolant im using generic off the shelf distilled water with a gallon of isoproyl alcohol added and a whole house generic water filter on the exit of the water pump to try and keep particles out of the gpu blocks.

second video on spots wood build


https://www.youtube.com/watch?v=feXukc1d39Y&feature=youtu.be

I got a Baikal Giant 2000MH that was super profitable on X13 via nicehash. Since the hack I use zpool.ca but it makes very little.. any better options?
I hope NH comes back soon.

+1 on this. Windows based, dev updates miners, coins and pools quickly (and is quick to fix any issues), flexible monitoring, same price as smos…

This could be really good if you were looking to put in radiant heat. And then shift to a swimming pool during the summer.

I am quite happy with the Evga hybrids in my garage noise level is low and basement  den tv room is good.

Cheers Phil, these do look quite fast and furious. Will likely get 3 of those after xmas when I have time to do some modding again.
I reckon they will push more air through the GPUs than that single 12" desk fan aimed at the rig. At least the airflow should be more targeted.

Your project is very interesting. Are you in an area that is warmer in the winter months? Here where we live I believe the lines would freeze if the rigs were shut off at any point in the winter, perhaps if we buried them deeper it would be safe.

I think this is a classic case of "this post is worthless without pics"!


Go on, show us your diy project, I'm curious to see what you have done!

Personally I have a water-chiller for my PC, but for the mining rigs it just wouldn't make sense...

How is everyone,

Spent the weekend digging a 2 ft deep trench to lay the 200ft of pex line in my backyard over the weekend. Just booted up the rig on distilled water and started it up mining... Currently i have zero radiators or fans in the circuit on 6 x 1080ti's.

6 x 1080ti's (already had)
6 x Barrow GPU Blocks $53.99ea
12 x G1/4 ABS barbed fittings $3.88 per bag of 6
1 x 960 gallons/hr 120v pump $55.99
1 x Water Pressure Reducing/dump valve set to 15psi $28.99
250ft of pex line

So far its running stable on temps, gonna run it for a few days to see if temps start to heat soak the ground. The pump i may change back to gravity fed system, i really dislike the amount of power being drawn on the pump with it pumping against so much resistance and dumping the majority of the water back into the system.

you guys need to check out ethmonitoring/ethcontrol

https://ethmonitoring.com

You could switch to power line adapters.  Wifi can be problematic with random deadzones and electromagnetic interference from GPU's.

I tried the smos hype and there are plenty of drawbacks, but if it helps some people that's great.


Some pros -
Update rigs remotely - but you can do the same with windows and nodes installed so TIE
Update GPU settings via web portal - you can also do this with other miner monitors but they offer better miners and configuration, so no point actually for smos
GPUs did appear as soon as the rig booted, windows does sometimes make me install GPU's 1 at a time, also win update is slow AF dl'ing windows drivers needed.
I guess being able to run off a USB stick is a pro.

Cons -
smos is slow AF updating miners, they still don't have Alexis78 to this day. That's pretty pathetic. regular ccminer gets 300 Mh/s VS. 360 Mh/s on Alexis. That's huge.
smos doesn't have wifi
smos doesn't have alerts like other monitors, even a simple .bat file can give you telegram alerts for temps etc.
smos doesn't allow you to easily install your own miners, you are stuck with what they give you and smos is slow AF doing any updates.


At the end of the day, I gave it a week to impress me but the smos hype for me was just that.

I don't know what all these problems people say they have with windows is being unstable etc, but I literally have zero problems with my windows rigs. I'm familiar with windows, it allows more customization, functions, miners, settings, configs and options.


I only have 10 rigs ATM so maybe my views will change when I finally get in the warehouse and expand. I doubt it though.

yes he is

lmao... i got a good chuckle from your "Al-Gore" reference lol... good stuff!  And lest we all forget... AlGore not only invented the Internet, he also invented the entire CryptoCurrency ecosystem and is actually the REAL Satoshi Nakamoto ;-)

I have windows 10  on 2 rigs and I have windows 7 on one rig.

windows  simply needs more care then smos.

but  windows will allow more coins and al-gore-rhythms  then smos will.

and some mobos will  help windows issues as will some mobos will  hurt windows issues.

for bulk mining  like I do with say 27000-29000 sols  of zec in 3 soon to be 4 places smos is better then windows.

but if you do an exotic shit coin  windows is more likely to be able to do it.

I have been able to find a good coin  and send  hash  to it on windows  for months.

they are smaller hash rates so pointing say  3 1070's and 2 1080 tis  will do well.

pointing all the gear does not.

So I will keep windows around.