Topic: SmartMinerPRO (CPU/GPU/ASIC) Ethash/Etchash/Kawpow/Kaspa/Octopus/Firo/Equihash - page 4. (Read 1802 times)

Hello,

question regarding rtx 3060 v1

Hiveos, driver 460.39, lolminer 1.49

I have still the same hashrate in ETH+TON (40.5 MHs/1GHs)(1460cc,2300mem) on version lolminer 1.49 as on version 1.48. In the latest patch notes I've read that the lhr unlocker for rtx 3060v1 should be pushed further to around (86.5 - 87 % on RTX 3060 V1 and 460.39 driver).

How Can I trigger my rtx 3060v1 to reach higher hashrate on ethash?

Thanks

If I run both cards together it will still say that all the cards are being selected, but there is no apparent impact on the 3090Ti, it will run at its normal 135-137 MH/s as a miner reported speed, but if I leave the 3090Ti idle, it will corrupt (maybe due to the P-state not switching to P0, or some fan monitoring that is performed by HiveOS when a card is engaged in mining vs. idle?) and the computer will reboot; I will have to try and confirm the actual poolside speed on the card to see if it is reflecting the 135+ from the miner.

As for the speed:  the miner is reporting about 85.6 average, but the 'realtime' fluctuates a lot, as compared to the latest t-rex, which gives 83 MH/s from the miner and is very stable with that value after about the first 5 minutes, I think the pill is cycling too often (maybe there are conditions which make it cycle more often or less?) and when it does a cycle, the hashrate drops and reduces the overall reported rate for the next 60-90 seconds, which will reduce the average to 82 or 83 and possibly the overall poolside hashrate (although 2MH/s isn't really significant on a shares found metric as it's less than .25 SD, which means luck has a far greater impact on overall average share rate than 2 MH/s).

My next test will be to run the 3090Ti in another instance outside of Hive, or with another miner (since HiveOS won't allow the same miner to be running twice within its management software) and see if the Pill hurts the 3090Ti in that case, and also to get single card speed and variability metrics for the 3070Ti LHR card.

I already receive my coins, thanks for support

Good update, the developer has added support for all miners with unlocked LHR mod waiting for NVIDIA cards. Thank you! 

SmartMinerPRO 1.3.0

Add Miners & Update

    GMiner 2.96
    TRM 0.10.0
    T-Rex 0.26.1
    xmrig-6.7.0
    cpuminer-opt-3.19.7

Updates SMP:

    Check generated DAG, a warning at very high GPU overclocking for Ethash, Etcash, KAWPOW and ProgPoW algorithms, helps overclock GPU without errors
    checking Shares on CPU, a warning when the GPU is overclocked too high for the Ethash, Etcash, KAWPOW and ProgPoW algorithms, helps overclock the GPU without errors
    DAG caching, if the GPU has enough memory, DAG files are not recalculated when switching to another algorithm when mining Ethash + Zilliqa or Nicehash, which has a positive impact on user profitability
    auto-selection of optimal cores for each device on Ethash, Etcash, KAWPOW
    ability to manually select the core on each device for Ethash, Etcash
    GPU temperature control and shutdown in case of overheating
    watchdog - a process-watchdog that monitors the state of key systems of the miner, and will restart the miner if it crashes or hangs
    Mechanism to recover lost connections to the pool
    Failover support - the Miner uses failover pools until the connection to the main pool is restored
    support for secure connections
    SOCKS5 proxy support
    informative and readable display of tabular statistics on the console
    detailed information per device (temperature, power consumption, load on the cooler, memory frequency, CPU frequency, power efficiency)
    parallel output of the information to the console and to a file on the disk
    built-in statistics server - remote monitoring of the miner in a web browser
    memory settings for Nvidia GPUs with GDDR5X and GDDR5 memory
    Overclocking core clock, memory clock, core voltage, memory voltage, fan speed, power limit for Windows
    Safe DAG generation for Nvidia GPUs
    auto fan speed control to achieve target temperatures

Download Link: https://github.com/MiningSoftware/SmartMinerPRO/releases/

Windows version is not working for me.
The program self opens continually, thousands of times, eating all the computer resources & finally you have to do a hard reset.

Is there a way to see the intensity setting and a way to adjust it?
Running miner on 1080ti even with only 50% TPD it is using 250 watts per card..power usage is off the hook.

Is there any sense to mine Equihash 144.5 coins on AMD GPUs?
Or this algo is not profitable on AMD GPUs?

I just added the Windows binary  Cheesy

Only thing I observed there is that the API in Windows seems to be a bit unstable - at least the Api shut down from time to time (this does not affect mining itself). I will look into that Smiley

Hi, I tried your product, everything works, but I want a slightly different design

SmartMinerPRO (SMP) is a software product developed by SmartMiner.PRO with a simple and convenient GUI. This version of SMP was created to work with each cryptocurrency based on these algorithms, including Bitcoin BTC. Ethereum ETH, Ethereum Classic, Bianace Coin, BSC, Grin, Monero, Ravencoin, Tron TRX, Bitcoin Cash BCH, Sumocoin, Neoxa, Kaspa KAS and many others. This version of SMP runs on Windows with CPUs and GPUs AMD or Nvidia and ASIC/FPGA.

• WebSite SmartMinerPRO: http://smartminer.pro/
• Official github developer: https://github.com/MiningSoftware/SmartMinerPRO
• Bitcointalk: https://bitcointalksearch.org/topic/smartminerpro-cpugpuasic-ethashetchashkawpowkaspaoctopusfiroequihash-5282848
• DOWNLOAD LINKS: https://github.com/MiningSoftware/SmartMinerPRO/releases

DevFee

SmartMinerPRO (SMP) is completely free software. This does not apply to built-in programs for mining (miners).

Key Features SMP:

  • 💎 Built-in miners: XMR-STAK & XMRIG, GMINER. T-REX, TeamRedMiner, CGMiner, T-Rex, NBMiner, Nanominer, PhoenixMiner, CCMiner, miniz, cpu miner, cpuminer-opt, Kaspa Miner, Kawpowminer and many others.
  • 🖥 Works on all versions of Windows
  • 📊 Over 50 of the best mining puols
  • ℹ️ Complete information about each currency with links  
  • 📈 CoinGecko price and coin statistics
  • 📊 Coin mining statistics from Cryptunit
  • ♻️ CPU & GPU Mining
  • 🔸 Easy to use
  • 🔸 Easy installation of other miners and .bat configuration files.
  • 🔸 To start mining using SMP +, just enter your wallet in the .bat file of the selected miner
  • 🔸 SMP + has demonstrated high performance when working with Bitcoin, Ethereum, Ethereum Classic, Monero, Raven and other currencies, stands out for its high stability and easy setup.
  • 🔸 Easy one-click CPU mining for CPUs that support at least SSE2 (only works on Windows x64).
  • 🔸 Easy one-click GPU mining for NVIDIA GPUs using microarchitecture (compute capability) SM 3.0+.
  • 🔸 Easy one-click GPU mining for AMD GPUs using any AMD GPU devices that supports OpenCL.
  • 🔸 Integrated support for Simple Multi-Algorithm. Always mine most profitable algorithm.
  • 🔸 Integrated benchmarking tool. Run it only once before you start mining and after every hardware/driver/software upgrade.
  • 🔸 Watch-feature - automatically restart miner if crashed or hanged.
  • 🔸 Much more..

Screenshots GUI SmartMinerPRO SMP:


How to start

1. Download "SmartMinerPRO"
2. Unpack the archive
3. Run "SmartMinerPRO.exe"

IMPORTANT! For your mining equipment, you must install the necessary dependencies. Since each miner program has its own requirements for work. For reference, you can refer to the root directory in the miner’s folder.

System requirements

! OS Support: Windows (32/64 bit).

    - WINDOWS XP,7,8,10 or later (x64)
    - CPU (x64/x86/ARM) For CPU mining a modern CPU with SSE2 support
    - OpenCL for AMD GPUs. For AMD mining any AMD GPU with OpenCL support
    - CUDA for NVIDIA GPUs. For NVIDIA mining any NVIDIA GPU with Compute capability (SM) 3.0 or newer
    - up-to-date patches for OS
    - up-to-date drivers for all GPUs
    - Reliable internet connectivity

Note: .NET Framework 4.8 or higher and Microsoft Visual C++ Redistributable 2015 are required. No additional installations should be needed if you use Windows 7 or later. However, if you encounter any issues when starting application (application would fail to start or errors/warnings about missing DLL files are displayed) you should download and install Microsoft .NET Framework 4.8 and Microsoft Visual C++ Redistributable 2015 (vcredist_x64.exe) (after installation a reboot might be required).

    - Microsoft .NET Framework 4.8: https://dotnet.microsoft.com/download/dotnet-framework/thank-you/net48-web-installer
    - Microsoft Visual C++ Redistributable 2015: https://www.microsoft.com/en-us/download/details.aspx?id=48145

Full list Support miners SmartMinerPRO:

    + bminer
    + BZMiner
    + ccminer
    + Nanominer
    + Claymore
    + cpuminer-opt
    + cpuminer-GR
    + CryptoDredge
    + ethminer
    + EWB
    + Gminer
    + cgminer
    + sgminer
    + wildrig-multi  
    + kawpowminer
    + KaspaMiner
    + lolMiner
    + miniZ
    + NBMiner
    + PhoenixMiner
    + Progpowminer
    + SRBMiner-CN
    + SRBMiner-Multi
    + TeamRedMiner
    + TeamBlackMiner
    + T-Rex Miner
    + TT-Miner
    + xmrig
    + xmr-stak
    + xmr-stak-rx
    + z-enemy

! Please note that the list of supported miners will be expanded with subsequent versions of the SMP

How to use SmartMinerPRO

1. At the first launch of SMP, select the coin to be mined • Optionally, you can choose what equipment will be used, according to the standard, all available CPU / GPUs are used.
2. Click "Start mining", in the mining parameters window, select the miner and the finished .bat file (coins \ pool) • By default, safe recommended settings for increased profitability of mining are used.
3. You can edit the .bat file to replace the wallet and pool values with your own by pressing the "EDIT" button. • If desired, you can replace the parameters of the request, for this we recommend that you refer to the practical guide in the root folders of the miners.
4. After replacing the values of the wallet and pool with yours, click "RUN"
5. Then begins the extraction of coins

Release Note:

v1.3.3

Add Miner Software:
+ KaspaMiner: https://github.com/tmrlvi/kaspa-miner/releases/tag/v0.2.1-GPU-0.7
+ BZMiner: https://github.com/bzminer/bzminer/releases

Update Miner Software:
+ GMiner 3.12
+ lolMiner 1.61
+ miniZ 1.9z5b
+ NBMiner 42.2
+ BzMiner 12.1.1

v1.3.2

Add Miners and Updates SMP:
+ Team Red Miner v0.10.3.1
+ SRBMiner-MULTI GPU & CPU Miner 1.0.9
+ lolMiner 1.56
+ GMiner v3.06
+ Nanominer v3.7.2
+ miniZ v1.9z2
+ WildRig Multi 0.32.5
+ Team Black Miner v1.69
+ BzMiner 2.6
+ bminer 16.4.9

v1.3.1

Add Miners and Updates:
+ teamredminer v0.10.0
+ SRBMiner-MULTI GPU & CPU Miner 0.9.6
+ lolMiner 1.51a
+ GMiner v2.99
+ PhoenixMiner 6.2c
+ T-Rex 0.26.4
+ NBMiner v42.2
+ Nanominer v3.6.3
+ TeamBlackMinerv 1.63

v1.3.0

Add Miners & Update:
+ GMiner 2.96
+ TRM 0.10.0
+ T-Rex 0.26.1
+ xmrig-6.7.0
+ cpuminer-opt-3.19.7
+ lolminer 1.51

Updates Notes SMP:
Check generated DAG, a warning at very high GPU overclocking for Ethash, Etcash, KAWPOW and ProgPoW algorithms, helps overclock GPU without errors
checking Shares on CPU, a warning when the GPU is overclocked too high for the Ethash, Etcash, KAWPOW and ProgPoW algorithms, helps overclock the GPU without errors
DAG caching, if the GPU has enough memory, DAG files are not recalculated when switching to another algorithm when mining Ethash + Zilliqa or Nicehash, which has a positive impact on user profitability
auto-selection of optimal cores for each device on Ethash, Etcash, KAWPOW
ability to manually select the core on each device for Ethash, Etcash
GPU temperature control and shutdown in case of overheating
watchdog - a process-watchdog that monitors the state of key systems of the miner, and will restart the miner if it crashes or hangs
Mechanism to recover lost connections to the pool
Failover support - the Miner uses failover pools until the connection to the main pool is restored
support for secure connections
SOCKS5 proxy support
informative and readable display of tabular statistics on the console
detailed information per device (temperature, power consumption, load on the cooler, memory frequency, CPU frequency, power efficiency)
parallel output of the information to the console and to a file on the disk
built-in statistics server - remote monitoring of the miner in a web browser
memory settings for Nvidia GPUs with GDDR5X and GDDR5 memory
Overclocking core clock, memory clock, core voltage, memory voltage, fan speed, power limit for Windows
Safe DAG generation for Nvidia GPUs
auto fan speed control to achieve target temperatures

v1.1.2

+Updates miner plugins:
bminer-v14.1.0
CryptoDredge_0.23.0
ccminer-2.3.1
Claymore_v15.0
cpuminer-opt-3.12.4
ethminer 0.19.0
EWB_v0.6
gminer_2_55
kawpowminer-1.2.3
lolMiner_v1.28a
miniZ_v1.5t2_cuda10
NBMiner_37.5
PhoenixMiner_5.6c
SRBMiner-CN-V1-9-3
SRBMiner-Multi-0-7.5
teamredminer-0.8.3
T-Rex 0.20.3
TT-Miner 6.1.0
xmrig-6.6.1
xmr-stak-2.10.8
z-enemy 2.5

v1.0.1
SMP is a smart multi-currency cryptocurrency miner for CPU / GPU / ASIC / FPGA. Which itself finds the available equipment and selects the optimal settings. SMP + allows you to connect / disconnect / stop / start one or more farms in one click. During the initial start-up, in the “Quick Start” step, you can select a separate algorithm for each farm.


Command line options

Network:

_{--no-cpu                  disable CPU mining backend
-o, --url=URL                 URL of mining server
-a, --algo=ALGO               mining algorithm
  --coin=COIN               specify coin instead of algorithm
  -u, --user=USERNAME           username for mining server
  -p, --pass=PASSWORD           password for mining server
  -O, --userpass=U:P            username:password pair for mining server
  -x, --proxy=HOST:PORT         connect through a SOCKS5 proxy
  -k, --keepalive               send keepalive packet for prevent timeout (needs pool support)
  --nicehash                enable nicehash.com support
  --rig-id=ID               rig identifier for pool-side statistics (needs pool support)
  --tls                     enable SSL/TLS support (needs pool support)
  --tls-fingerprint=HEX     pool TLS certificate fingerprint for strict certificate pinning
  --daemon                  use daemon RPC instead of pool for solo mining
  --daemon-poll-interval=N  daemon poll interval in milliseconds (default: 1000)
  -r, --retries=N               number of times to retry before switch to backup server (default: 5)
  -R, --retry-pause=N           time to pause between retries (default: 5)
  --user-agent              set custom user-agent string for pool
  --donate-level=N          donate level, default %% (5 minutes in 100 minutes)
  --donate-over-proxy=N     control donate over xmrig-proxy feature}

CPU backend:

^{--no-cpu                  disable CPU mining backend
  -t, --threads=N               number of CPU threads
  -v, --av=N                    algorithm variation, 0 auto select
  --cpu-affinity            set process affinity to CPU core(s), mask 0x3 for cores 0 and 1
  --cpu-priority            set process priority (0 idle, 2 normal to 5 highest)
  --cpu-max-threads-hint=N  maximum CPU threads count (in percentage) hint for autoconfig
  --cpu-memory-pool=N       number of 2 MB pages for persistent memory pool, -1 (auto), 0 (disable)
  --cpu-no-yield            prefer maximum hashrate rather than system response/stability
  --no-huge-pages           disable huge pages support
  --asm=ASM                 ASM optimizations, possible values: auto, none, intel, ryzen, bulldozer
  --randomx-init=N          thread count to initialize RandomX dataset
  --randomx-no-numa         disable NUMA support for RandomX
  --randomx-mode=MODE       RandomX mode: auto, fast, light
  --randomx-1gb-pages       use 1GB hugepages for dataset (Linux only)
  --randomx-wrmsr=N         write custom value (0-15) to Intel MSR register 0x1a4 or disable MSR mod (-1)
  --randomx-no-rdmsr        disable reverting initial MSR values on exit
  --astrobwt-max-size=N     skip hashes with large stage 2 size, default: 550, min: 400, max: 1200
  --astrobwt-avx2           enable AVX2 optimizations for AstroBWT algorithm}

API:

_{--api-worker-id=ID        custom worker-id for API
  --api-id=ID               custom instance ID for API
  --http-host=HOST          bind host for HTTP API (default: 127.0.0.1)
  --http-port=N             bind port for HTTP API
  --http-access-token=T     access token for HTTP API
  --http-no-restricted      enable full remote access to HTTP API (only if access token set)}



OpenCL backend:

^{--opencl                  enable OpenCL mining backend
  --opencl-devices=N        comma separated list of OpenCL devices to use
  --opencl-platform=N       OpenCL platform index or name
  --opencl-loader=PATH      path to OpenCL-ICD-Loader (OpenCL.dll or libOpenCL.so)
  --opencl-no-cache         disable OpenCL cache
  --print-platforms         print available OpenCL platforms and exit}

CUDA backend:

_{--cuda                    enable CUDA mining backend
  --cuda-loader=PATH        path to CUDA plugin (xmrig-cuda.dll or libxmrig-cuda.so)
  --cuda-devices=N          comma separated list of CUDA devices to use
  --cuda-bfactor-hint=N     bfactor hint for autoconfig (0-12)
  --cuda-bsleep-hint=N      bsleep hint for autoconfig
  --no-nvml                 disable NVML (NVIDIA Management Library) support}

TLS:

_{--tls-gen=HOSTNAME        generate TLS certificate for specific hostname
  --tls-cert=FILE           load TLS certificate chain from a file in the PEM format
  --tls-cert-key=FILE       load TLS certificate private key from a file in the PEM format
  --tls-dhparam=FILE        load DH parameters for DHE ciphers from a file in the PEM format
  --tls-protocols=N         enable specified TLS protocols, example: "TLSv1 TLSv1.1 TLSv1.2 TLSv1.3"
  --tls-ciphers=S           set list of available ciphers (TLSv1.2 and below)
  --tls-ciphersuites=S      set list of available TLSv1.3 ciphersuites}

Logging:

_{-S, --syslog                  use system log for output messages
-l, --log-file=FILE           log all output to a file
  --print-time=N            print hashrate report every N seconds
  --health-print-time=N     print health report every N seconds
  --no-color                disable colored output
  --verbose                 verbose output}

Misc:

_{-c, --config=FILE             load a JSON-format configuration file
-B, --background              run the miner in the background
-V, --version                 output version information and exit
-h, --help                    display this help and exit
  --dry-run                 test configuration and exit
  --export-topology         export hwloc topology to a XML file and exit
  --title                   set custom console window title
  --no-title                disable setting console window title}  

DONATE:

BTC BTC: bc1qmpdug4lkkz4kvw2gnrfx9hjgclcge9ytq0z0wl
$ ETH: 0xd5533d796302DA0Ec67a34eBB0Ba432B164a1CA5
$ XMR: 8BFHZwHteLf46VhuXdw9t8h3oEm1ajFxPeNdLLKsnLZjS5EJQL1dJpSCdYFAzty2S2UYd8G86YvioXL b3yXfPLVvN71u1XK
$ RVN: RV8Tz58pZ6Q6fFn5LGGN8hQsUoPzJC1vMi
$ LTC: ltc1q2c68a8spxap6j3nhjk09rem6zf75rahgu7s0gh