Topic: "Smoothie Swag" - ~7.5" x ~6" "HAND CARVED" Bitcoin Art (Proof of Ownership) (Read 3409 times)
January 31, 2015, 09:41:59 PM
Loving your work smoothie amazing what a laser cutter will do
January 31, 2015, 09:20:43 PM
Using a hologram may not work well. Engraving an address of private key may be a better route.
January 31, 2015, 09:13:44 PM
someone asked for a 100 LTC design for a wooden bar or coin...
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
good job..
Good Job??? This looks awful.
pretty good, with value of 100LTC. Wonder how well the hologram will go with it.
January 31, 2015, 08:59:02 PM
Thanks Smoothie.
January 31, 2015, 08:25:21 PM
This piece has been sent to Kialara as of yesterday (Friday).
Kialara, let me know once you get it.
Aloha
Smoothie
Kialara, let me know once you get it.
Aloha
Smoothie
January 31, 2015, 07:35:24 PM
Wood you look here, amazing.
https://bitcointalksearch.org/topic/woodcollector-carving-time-to-put-the-kids-to-bed-942319
https://bitcointalksearch.org/topic/woodcollector-carving-time-to-put-the-kids-to-bed-942319
January 31, 2015, 03:19:12 AM
someone asked for a 100 LTC design for a wooden bar or coin...
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
good job..
Good Job??? This looks awful.
January 30, 2015, 08:33:28 PM
January 30, 2015, 06:28:13 PM
Funny, lol
January 30, 2015, 08:23:31 AM
someone asked for a 100 LTC design for a wooden bar or coin...
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
good job..
January 30, 2015, 04:56:14 AM
someone asked for a 100 LTC design for a wooden bar or coin...
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
Nice
January 29, 2015, 08:46:21 PM
someone asked for a 100 LTC design for a wooden bar or coin...
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
something I slapped together messing around...
I tried cutting out a circle/coin with the laser and I epically failed lol. Learned that wetting the wood does help from it leaving burn marks on the design, hence the up close image.
I'll have to get thinner pieces of wood to be able to cut it with the laser much more easily.
January 29, 2015, 06:07:51 PM
At this point I am going to play around with my laser and on random pieces of wood based on requests I have had.
No promises on any products to be sold. But I will be in touch with those who have contacted me personally on the topic.
My "Smoothie Swag" piece was only to make a point and am not in any way shape or form a wood worker or master crafts man. But if it makes sense and there is enough demand for wood products I may make them and sell them.
But for the moment since this is not my field so I will just tinker a bit with it for now and perhaps post here with some pix when I have something worth looking at.
No promises on any products to be sold. But I will be in touch with those who have contacted me personally on the topic.
My "Smoothie Swag" piece was only to make a point and am not in any way shape or form a wood worker or master crafts man. But if it makes sense and there is enough demand for wood products I may make them and sell them.
But for the moment since this is not my field so I will just tinker a bit with it for now and perhaps post here with some pix when I have something worth looking at.
January 28, 2015, 11:42:47 PM
This piece obviously is getting under the skin of some (unnamed) user in this thread. 
Its not to do with the piece, it doesn't bother me, I can get a joke - what bothers me is that won't answer yes or no to whether you own this laser OR whether you had someone do the piece for you?
Which is it - you claim to have a $15k laser so did you do this on your own as you claim or did someone else do it?
LOL actions speak louder. Nothing you post changes the image of butthurt you present when you do post.
Actions speak louder than words - Nope not answering a question regarding something you claimed makes you seem like you are lying? Are you lying about owning the $15k laser and doing this piece on your own?
Negative feedback left until you prove otherwise.
Oh noes you left negative feedback on my profile.
Abuse of the trust system. Good job.
Negative feedback.. left on your profile for abusing the trust system to exploit answers out of me of which I do not owe you.
When you remove your negative feedback I will remove mine off your profile. To me it doesn't matter either way. As you initiated this "trust system abuse".
As I said your actions are showing your butt hurt. Keep it up!
Aloha!
Abuse of trust system - have you seen some of the trust you have left for people. I am not butt hurt (which sounds like something a teenager would say) - feedback means nothing to me here, i am just here to browse, increase my bitcoin holdings and spend bitcoins.
January 28, 2015, 10:27:08 PM
This piece obviously is getting under the skin of some (unnamed) user in this thread.
Its not to do with the piece, it doesn't bother me, I can get a joke - what bothers me is that won't answer yes or no to whether you own this laser OR whether you had someone do the piece for you?
Which is it - you claim to have a $15k laser so did you do this on your own as you claim or did someone else do it?
LOL actions speak louder. Nothing you post changes the image of butthurt you present when you do post.
Actions speak louder than words - Nope not answering a question regarding something you claimed makes you seem like you are lying? Are you lying about owning the $15k laser and doing this piece on your own?
Negative feedback left until you prove otherwise.
Oh noes you left negative feedback on my profile.
Abuse of the trust system. Good job.
Negative feedback.. left on your profile for abusing the trust system to exploit answers out of me of which I do not owe you.
When you remove your negative feedback I will remove mine off your profile. To me it doesn't matter either way. As you initiated this "trust system abuse".
As I said your actions are showing your butt hurt. Keep it up!
Aloha!
January 28, 2015, 10:14:24 PM
This piece obviously is getting under the skin of some (unnamed) user in this thread.
Its not to do with the piece, it doesn't bother me, I can get a joke - what bothers me is that won't answer yes or no to whether you own this laser OR whether you had someone do the piece for you?
Which is it - you claim to have a $15k laser so did you do this on your own as you claim or did someone else do it?
LOL actions speak louder. Nothing you post changes the image of butthurt you present when you do post.
Actions speak louder than words - Nope not answering a question regarding something you claimed makes you seem like you are lying? Are you lying about owning the $15k laser and doing this piece on your own?
Negative feedback left until you prove otherwise.
January 28, 2015, 10:04:32 PM
Hay Smoothie. How much to burn this into a piece of white pine 8"x4"x1/2"
https://www.dropbox.com/s/q2b9uumsjq5xcx9/2014-12-08%2017.31.11.jpg?dl=0
I have it as a vector. or JPG
https://www.dropbox.com/s/q2b9uumsjq5xcx9/2014-12-08%2017.31.11.jpg?dl=0
I have it as a vector. or JPG
Email me at [email protected] or PM me.
Not exactly sure what white pine looks like. I am no woodwood-working expert but I will try.
January 28, 2015, 10:02:24 PM
This piece obviously is getting under the skin of some (unnamed) user in this thread.
Its not to do with the piece, it doesn't bother me, I can get a joke - what bothers me is that won't answer yes or no to whether you own this laser OR whether you had someone do the piece for you?
Which is it - you claim to have a $15k laser so did you do this on your own as you claim or did someone else do it?
LOL actions speak louder. Nothing you post changes the image of butthurt you present when you do post.
January 28, 2015, 09:48:47 PM
Hay Smoothie. How much to burn this into a piece of white pine 8"x4"x1/2"
https://www.dropbox.com/s/q2b9uumsjq5xcx9/2014-12-08%2017.31.11.jpg?dl=0
I have it as a vector. or JPG
https://www.dropbox.com/s/q2b9uumsjq5xcx9/2014-12-08%2017.31.11.jpg?dl=0
I have it as a vector. or JPG
January 28, 2015, 07:37:18 PM
This piece obviously is getting under the skin of some (unnamed) user in this thread.
Its not to do with the piece, it doesn't bother me, I can get a joke - what bothers me is that won't answer yes or no to whether you own this laser OR whether you had someone do the piece for you?
Which is it - you claim to have a $15k laser so did you do this on your own as you claim or did someone else do it?
Jump to: