💥SOLARIS XLR💥100% PoS + Masternodes ⚡Zerocoin⚡txbit.io in development - page 287.

Adriano2010

hero member

Activity: 1414

Merit: 516

Quote from: Elder III on October 08, 2017, 10:03:06 PM

Quote from: Attractor on October 08, 2017, 09:32:03 PM

What if my own exernal IP is dynamic?

I may be wrong, but I'm pretty sure that it requires a fixed IP address (that would be standard for masternode coins). That's why many people rent a VPS to set it up, or pay for a service that includes VPS and setup done by them etc.... I have contacted NODEShare about Solaris and they have expressed interest in adding it. They pretty much do it all for you and I think would be worth the fee they charge if they do choose to add Solaris.

http://nodeshare.in/

Also I see that Node-VPS has added Solaris, but I'm not sure if they offer setup services or if they are just providing the VPS with fixed IP etc.... has anyone used them before?

https://node-vps.com/web/

I use now first time node-vps.com and works fine. They run the masternode after you setup your wallet and they not store and not need send coins to. Is easy to setup and you don't need to run or leave your wallet and PC on. I got my first 0.4 XLR mined through masternode.

enigs

newbie

Activity: 62

Merit: 0

Quote from: schyter on October 08, 2017, 08:47:54 PM

you cannot run masternodes with coins from coinexchange currently.
You need the coins of the new XEVAN chain.
So you have to buy from coinexchange and swap them for the new coins before you can run a masternode

Perfect, that's all I needed to know.

Hopefully Nova can list it on the new chain but I wanna grab the old one for now before the price gets too high.

Elder III

sr. member

Activity: 1246

Merit: 274

Quote from: Attractor on October 08, 2017, 09:32:03 PM

What if my own exernal IP is dynamic?

I may be wrong, but I'm pretty sure that it requires a fixed IP address (that would be standard for masternode coins). That's why many people rent a VPS to set it up, or pay for a service that includes VPS and setup done by them etc.... I have contacted NODEShare about Solaris and they have expressed interest in adding it. They pretty much do it all for you and I think would be worth the fee they charge if they do choose to add Solaris.

http://nodeshare.in/

Also I see that Node-VPS has added Solaris, but I'm not sure if they offer setup services or if they are just providing the VPS with fixed IP etc.... has anyone used them before?

https://node-vps.com/web/

rooster2000bka

sr. member

Activity: 299

Merit: 250

Dear Dev!
I see in #1: Solaris signature campaign is closed !
So what your mean? I joint your campaign before, now i still in your signature campaign?
Thanks

Attractor

member

Activity: 238

Merit: 10

What if my own exernal IP is dynamic?

schyter

sr. member

Activity: 385

Merit: 257

Open to any CryptoBusiness idea you have for Ghana

Quote from: maxmad_x on October 08, 2017, 08:50:55 PM

THis is incomplete

The External and internal IPs and external and internal ports on both of the Conf files are not clear!

Sir, what do you mean by they are not clear?
Are they illegible to you?

Also, where in the guide did you see internal IP and internal Port?
It seems you didn't follow the guide thoroughly because you are mentioning things that are not in it.
Please start again and this time, follow the guide more carefully. Even a single "space" at the wrong place can ruin your masternode setup.

solaris.conf should look like this

Code:

rpcallowip=127.0.0.1
rpcuser=ANY_LONG_USERNAME
rpcpassword=ANY_LONG_PASSWORD
staking=1
server=1
listen=1
port=port
masternode=1
masternodeaddr=YOUR_EXT_IP:PORT
externalip=YOUR_EXT_IP:PORT
masternodeprivkey=MN_PRIVKEY
addnode=78.145.45.173
addnode=92.108.70.246
addnode=89.169.62.37
addnode=89.65.73.101

masternodes.conf should look like this

Code:

MASTERNODE_ALIAS VPS_IP:PORT Private_key TX_ID TX_INDEX

You can find this in the guide
If its about sight, you can get help from someone who can see clearly if its still not clear

use 60020 for your port

Join Telegram Group Chat
https://t.me/solariscoin

maxmad_x

sr. member

Activity: 546

Merit: 250

It takes a lot to build but not much to lose

Quote from: schyter on October 08, 2017, 08:47:54 PM

Quote from: psihotoc on October 08, 2017, 01:21:03 PM

There are detailed instructions for installing masternode?

HOW TO SETUP MASTERNODE GUIDE

THis is incomplete

The External and internal IPs and external and internal ports on both of the Conf files are not clear!

frostminer

hero member

Activity: 742

Merit: 505

Quote from: enigs on October 08, 2017, 08:47:25 PM

Very exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.

Any feedback is much appreciated, thanks!

To run masternode you must be on the new xevan chain.

Coins from old chain will need swap

schyter

sr. member

Activity: 385

Merit: 257

Open to any CryptoBusiness idea you have for Ghana

Quote from: psihotoc on October 08, 2017, 01:21:03 PM

There are detailed instructions for installing masternode?

HOW TO SETUP MASTERNODE GUIDE

Quote from: enigs on October 08, 2017, 08:47:25 PM

Very exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.

Any feedback is much appreciated, thanks!

Which kinks are you referring to?

I am personally running a masternode and i have recieved 4 payouts so far.

you cannot run masternodes with coins from coinexchange currently.
You need the coins of the new XEVAN chain.
So you have to buy from coinexchange and swap them for the new coins before you can run a masternode

enigs

newbie

Activity: 62

Merit: 0

Very exciting project. I'm about to buy enough for a masternode, but I'm uncertain whether it's safe to take it off Coinexchange and place it onto the Raspberry wallet for MN/PoS or wait until the kinks are ironed out.

Any feedback is much appreciated, thanks!

frostminer

hero member

Activity: 742

Merit: 505

Question.

Why's seemingly the miners getting 2XLR instead of 1.6?

Is it related to all the entries in the log like this:

2017-10-09 00:29:09 CMasternodePayments::IsTransactionValid - Missing required payment of 0.40 to SXYwUbQi7LiNjDr8xxxxpmqA7WSsAT4aNx
2017-10-09 00:29:09 Invalid mn payment detected CTransaction(hash=9b346xxxb6, ver=1, vin.size=1, vout.size=1, nLockTime=0)
CTxIn(COutPoint(0000000000000000000000000000000000000000000000000000000000000000, 42949xx95), coinbase 02340804c5c2da59088100002500000000796gggg000, nSequence=0)
CTxOut(nValue=2.00000000, scriptPubKey=OP_DUP OP_HASH160 f6f7dxxxf3f3)
2017-10-09 00:29:09 Masternode payment enforcement is disabled, accepting block

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: ironmanTR on October 08, 2017, 05:07:16 PM

While trying to setup masternode, I get nothing when I type masternode outputs. Just get
" {

} "

send more than 1000 to another wallet and then exactly 1000 back to the wallet you want to use, and start again with the setup

use this , substitute everything Vivo for Solaris:

http://www.explorerz.top/vivo-mn.html

ironmanTR

member

Activity: 95

Merit: 10

While trying to setup masternode, I get nothing when I type masternode outputs. Just get
" {

} "

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: The Cryptophilanthropist on October 08, 2017, 04:35:04 PM

Quote from: schyter on October 08, 2017, 04:23:12 PM

HOW TO SETUP MASTERNODE GUIDE

BASICALLY WHAT I POSTED (AND DIDN'T GET PAID FOR CUZ I DIDN'T MAKE IT ) EXCEPT YOURS IS NOT AS GOOD !!

lol WEAK!

AND....DOES NOT EXPLAIN "COLD" NODE SETUP !!

#PEOPLEGETTINGPAIDFORSHITWORK

...AND SOMETHING LOOKS FUNNY

IN HIS TUTORIAL...CAN YOU SPOT WALDO?

....since I got buried by a repeat post

SolarisDev

sr. member

Activity: 687

Merit: 291

Algo: XEVAN
Block time: 60 seconds
Difficulty adjustment: each block (Dark Gravity Wave v3)
PoW: ends on block 259200 / 180 days
PoS: starting from block 259201
Masternodes: 1000 XLR collateral
Darksend: TX obfuscation
InstantX: SwiftTX
RPC port: 61020
P2P port: 60020

Mandatory update (08 October 2017)
Please update as soon as possible. This version contains fixes masternode issue and
added checkpoint

https://github.com/Solaris-Project/Solaris/releases/tag/v2.0.1.0

Windows64 QT wallet	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-qt-2.0.1.0-win64.zip
Windows64 daemon	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-daemon-2.0.1.0-win64.zip
Windows32 QT wallet	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-qt-2.0.1.0-win32.zip
Windows32 daemon	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-daemon-2.0.1.0-win32.zip
Linux64 daemon	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-daemon-2.0.1.0-linux64.tar.gz
Raspberry64 daemon	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-daemon-2.0.1.0-raspberry64.tar.gz
Raspberry32 QT wallet	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-qt-2.0.1.0-raspberry32.tar.gz
Raspberry32 daemon	https://github.com/Solaris-Project/Solaris/releases/download/v2.0.1.0/solaris-daemon-2.0.1.0-raspberry32.tar.gz

Solaris signature campaign is closed for a new members !

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

Quote from: schyter on October 08, 2017, 04:23:12 PM

HOW TO SETUP MASTERNODE GUIDE

BASICALLY WHAT I POSTED (AND DIDN'T GET PAID FOR CUZ I DIDN'T MAKE IT ) EXCEPT YOURS IS NOT AS GOOD !!

lol WEAK!

AND....DOES NOT EXPLAIN "COLD" NODE SETUP !!

#PEOPLEGETTINGPAIDFORSHITWORK

...AND SOMETHING LOOKS FUNNY

IN HIS TUTORIAL...CAN YOU SPOT WALDO?

schyter

sr. member

Activity: 385

Merit: 257

Open to any CryptoBusiness idea you have for Ghana

HOW TO SETUP MASTERNODE GUIDE

SolarisDev

sr. member

Activity: 687

Merit: 291

I'm pleased to announce that @schyter will be a part of Solaris Team. He will take responsibility for a telegram community.
He will receive 1000 XLR now and we going to pay him 150 XLR every week.

Solaris Telegram

Thanks for support Solaris !

The Cryptophilanthropist

full member

Activity: 231

Merit: 101

YOU SHOULD BE ABLE TO SUBSTITUTE EVERYTHING HERE FOR MASTERNODES AS WELL AS THE COLD MASTERNODE GUIDE WHICH WILL REQUIRE A VPS TO RUN, HOT-NODING WORKS BUT IS NOT VERY SAFE!!!

http://www.explorerz.top/vivo-mn.html

JUST SUBSTITUTE EVERYTHING VIVO FOR SOLARIS , HOPEFULLY THIS HELPS OTHERS!!

ironmanTR

member

Activity: 95

Merit: 10

Quote from: SolarisDev on October 08, 2017, 03:31:06 PM

Quote from: CoinFolium on October 08, 2017, 03:04:14 PM

so my xlr are on coinexchange, do i still have to do the swap?

Quote from: SolarisDev on October 08, 2017, 07:58:51 AM

We got a message from CoinExchange regarding a swap :

Quote

I have had very little time lately . We are upgrading the system at the moment. So unfortunately cannot commit to doing the swap at least for the next week.

Then we asked him if its ok to contact him after next week and he agreed.

In the meantime, I sent a query to Novaexchange with request to add Solaris with Xevan algorithm to their voting list .

You have time to swap until 06 December. You can trade for now only old Solaris with Nist5 algorithm. Your choice.

Thanks for your support!

How to setup masternode link is deleted. Can you send new one ?

Topic: 💥SOLARIS XLR💥100% PoS + Masternodes ⚡Zerocoin⚡txbit.io in development - page 287. (Read 308924 times)