Pages:
Author

Topic: [Sold Out] ASICMiner Cubes 30gh-38gh/s - USA .25 BTC - 4+ orders Free Shipping - page 8. (Read 14851 times)

legendary
Activity: 1973
Merit: 1007
I've got some interesting observations from my testers that could be applicable for some of you in cold areas. (Pretty much everyone in the US right now...) On two seperate occasions, cubes that were cold from outside were showing as all x's if set to high. After running on low for a while, they were able to crank them up to high clock without issue. I suggest you let your cubes sit in room temperature for a while before you turn them on and give them a good burn in on low clock for half an hour or so.
legendary
Activity: 1973
Merit: 1007
All orders up to this point have been shipped.
legendary
Activity: 1973
Merit: 1007
So the low clock cubes are .69 BTC?? or did I not understand that correctly?
Yes, I've got a few low clock only cubes available for .69
hero member
Activity: 574
Merit: 500
Mining for the hell of it.
So the low clock cubes are .69 BTC?? or did I not understand that correctly?

That is correct but plus shipping

And if he has any of thoes in stock...
sr. member
Activity: 356
Merit: 250
Dock.io
So the low clock cubes are .69 BTC?? or did I not understand that correctly?
member
Activity: 112
Merit: 10
Happy to vouch for Crazy. I purchased one of his eBay Cubes and whilst it spent two weeks going all over the USA with USPS (I enjoyed the geography lesson!) it then only took two days to arrive in Australia. Crazy sent it immediately after payment and sent a message with the notes re loose screws, bent board etc.

Very happy with his service.
legendary
Activity: 1973
Merit: 1007
Orders up to 2 PM CST will be shipped today.
hero member
Activity: 574
Merit: 500
Mining for the hell of it.
Ordered 2 cubes saturday and ordered one today(sunday). Can't wait till they come in.
newbie
Activity: 7
Merit: 0
Payment for 1 HIGH CLOCK Cube, transaction and shipping address has sent via PM.  Thank you!
legendary
Activity: 938
Merit: 1000
I agree, he seems to be a really good seller. I am glad he noted the reset issue (testers may not be fully resetting and thus the config URL will fail to work, so don't be afraid to hold down the reset button for a good ten seconds) and will post this in future offerings of the cube. Some people ignore problems instead of owning them and doing something about it, but CrazyGuy is very active on this forum and listens to the customers. I am happy to say my cube has been cranking out 38.04 GH/s on a Corsair CX750M for near ten hours and is still cool to the touch. All cards fully functional. Happy with my purchase.

BE Cube V9.17 ASIC GT (Proxy, Auto Longpoll support)

ASIC_01-16: O O O O O O O O O O O O O O O O
ASIC_17-32: O O O O O O O O O O O O O O O O
ASIC_33-48: O O O O O O O O O O O O O O O O
ASIC_49-64: O O O O O O O O O O O O O O O O
ASIC_65-80: O O O O O O O O O O O O O O O O
ASIC_81-96: O O O O O O O O O O O O O O O O
M_01-16: 378 397 385 400 403 393 381 390 385 385 396 396 400 401 399 396
M_17-32: 398 385 400 387 406 390 388 408 411 410 402 407 400 397 400 395
M_33-48: 413 400 394 416 409 397 391 405 414 396 406 392 406 408 396 387
M_49-64: 397 404 397 398 413 393 400 392 379 401 390 401 413 398 407 414
M_65-80: 396 409 399 425 393 392 393 409 390 393 387 412 379 390 401 385
M_81-96: 392 399 393 393 401 393 374 374 395 396 376 378 359 375 377 368
Jobs:0000308027 Accepted:0000297076 Rejected:0000000010 (5:5) F1 F2 F3
MHS:38043 Utility:520 Efficieny:096.44%
Started before: 0d,09h,31m,29s
legendary
Activity: 1973
Merit: 1007
All orders have been shipped.
legendary
Activity: 1973
Merit: 1007
Yeah, mine was set to .200, only saw it because it was on the same MAC as the wireless bridge I had it running behind.

Mine's running great for going on 24 hours. Thanks crazyguy!

Thanks guys, I'll make sure to notify future customers to always hit the reset button first to save some potential frustration.
newbie
Activity: 40
Merit: 0
Yeah, mine was set to .200, only saw it because it was on the same MAC as the wireless bridge I had it running behind.

Mine's running great for going on 24 hours. Thanks crazyguy!
legendary
Activity: 938
Merit: 1000
 Cheesy The reset worked to get the configuration page up.
legendary
Activity: 938
Merit: 1000
hi crazy, I received my cube a few hours ago, and I am having difficulty getting this one configured.  I have done this several times before...so it's a bit weird....I cannot access the configuration setup page on 192.168.1.254:8000.  when this cube was ran for 2 hours on your end to verify the highclock...was the ip configuration left stock or was it changed...or does that even matter ?  is there a way to reset ?

We reset the cubes after testing, but it's possible it was missed on yours. Try a quick press of the reset button and see if it comes up. If not, try holding it down for 10 seconds before letting go. I'm not sure it makes a difference but it may be a hard reset vs soft.

I wish I read this 7 hours ago. I have been going nuts trying to figure out how to connect to the config page. Hopefully this works. I have done every step outlined in the forums to a T.
full member
Activity: 126
Merit: 100
Will work for BitCoins
Prices updated for high verified and low only units. Those who have paid a higher price and still not received their unit, please contact me for a refund of the difference.

I still have not received my unit and I paid .89. Can I please get a refund of the difference, or can you keep the refund and I send the difference in BTC for another high clock unit?
newbie
Activity: 6
Merit: 0
Payment and PM sent.

Thanks!
legendary
Activity: 1973
Merit: 1007
hi crazy, I received my cube a few hours ago, and I am having difficulty getting this one configured.  I have done this several times before...so it's a bit weird....I cannot access the configuration setup page on 192.168.1.254:8000.  when this cube was ran for 2 hours on your end to verify the highclock...was the ip configuration left stock or was it changed...or does that even matter ?  is there a way to reset ?

We reset the cubes after testing, but it's possible it was missed on yours. Try a quick press of the reset button and see if it comes up. If not, try holding it down for 10 seconds before letting go. I'm not sure it makes a difference but it may be a hard reset vs soft.
hero member
Activity: 699
Merit: 504
full member
Activity: 138
Merit: 102
eoakland, I had the same issue.. couldn't find the IP or even sniff it.

Just do a hard reset and you'll find it at 192.168.1.254.

There is a small hole next to the red LED on the back. Depress switch inside with a paper clip for a sec or two (LED will flash) and you're good to go  Smiley
Pages:
Jump to: