[SOLD OUT] RED FURY - USB Miners - USA Group Buy - page 2.

NocTurNalFX

member

Activity: 99

Merit: 10

Quote from: liquiddrool on November 16, 2013, 09:06:36 PM

Does it need to be USB 3.0 if you do the pencil mod?

I wouldn't think it would need to be USB 3.0 . Just make sure you have sufficient power going to your fury before doing the pencil mod.

liquiddrool

member

Activity: 67

Merit: 10

Quote from: NocTurNalFX on November 16, 2013, 04:54:23 PM

Tried the pencil mod from the blue fury support thread. Sofar seems to be hashing away great. Getting a few more errors now. I plan on messing around with it some more later today. I have all of them on 2 anker 9 port usb 3.0 hubs

Does it need to be USB 3.0 if you do the pencil mod?

NocTurNalFX

member

Activity: 99

Merit: 10

Tried the pencil mod from the blue fury support thread. Sofar seems to be hashing away great. Getting a few more errors now. I plan on messing around with it some more later today. I have all of them on 2 anker 9 port usb 3.0 hubs

NocTurNalFX

member

Activity: 99

Merit: 10

Yup still getting the same hash rate steady. I was using cgminer before and only got around 2.2~ but reinstalled drivers and switched over to bfgminer. now im getting allot better. I used the drivers from the blue fury support thread. It took me a few days to get them running smoothly. Maybe they need to be broke in so to speak?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: NocTurNalFX on November 16, 2013, 12:55:17 AM

Got mine hashing great. Took a minute to get it all sorted.

Running on windows XP.

are you still getting those ghs numbers both are over 2.5gh. most of us get lower. 2.2-2.4

how are you sending power to them a usb 3.0 hub?

NocTurNalFX

member

Activity: 99

Merit: 10

Got mine hashing great. Took a minute to get it all sorted.

Running on windows XP.

oaxaca

hero member

Activity: 671

Merit: 500

Quote from: beavertank on November 15, 2013, 06:43:56 PM

Quote from: philipma1957 on November 15, 2013, 05:26:21 PM

I checked the dates I sent the money for 3 on the 9th.

I asked about them on the 13th he replied on the 14th. So I will wait a bit for them. I am hoping all is well.

Then maybe he's out of thumbs, or I need to PM him again, because I sent a message asking to order on the 12th and still have no reply.

Sorry for everyone who hasn't heard back. I've been buried with my day job. I promise to review all correspondence this weekend.

gjgjg

sr. member

Activity: 448

Merit: 250

received my 2 units today, just in time for some wkend mining. thanks oaxaca! Grin

zunimasa

newbie

Activity: 11

Merit: 0

Quote from: philipma1957 on November 15, 2013, 07:24:25 PM

Quote from: zunimasa on November 15, 2013, 07:00:52 PM

So I got it to work..just have to run two instances of bfgminer:

bfgminer -S bigpic:all for the red fury

But now I am getting like a 45% HW error rate.

are you hashing over 2gh most of us get 2.2gh-2.4gh the hw rate does not matter as long as you get close to 2.2-2.4gh hash

Yeah, I am getting 2.32/ 2.32/ 2.22Gh/s

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: beavertank on November 15, 2013, 06:43:56 PM

Quote from: philipma1957 on November 15, 2013, 05:26:21 PM

I checked the dates I sent the money for 3 on the 9th.

I asked about them on the 13th he replied on the 14th. So I will wait a bit for them. I am hoping all is well.

Then maybe he's out of thumbs, or I need to PM him again, because I sent a message asking to order on the 12th and still have no reply.

I hope mine show no later then monday.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: zunimasa on November 15, 2013, 07:00:52 PM

So I got it to work..just have to run two instances of bfgminer:

bfgminer -S bigpic:all for the red fury

But now I am getting like a 45% HW error rate.

are you hashing over 2gh most of us get 2.2gh-2.4gh the hw rate does not matter as long as you get close to 2.2-2.4gh hash

zunimasa

newbie

Activity: 11

Merit: 0

So I got it to work..just have to run two instances of bfgminer:

bfgminer -S bigpic:all for the red fury

But now I am getting like a 45% HW error rate.

beavertank

member

Activity: 94

Merit: 10

.

Quote from: philipma1957 on November 15, 2013, 05:26:21 PM

I checked the dates I sent the money for 3 on the 9th.

I asked about them on the 13th he replied on the 14th. So I will wait a bit for them. I am hoping all is well.

Then maybe he's out of thumbs, or I need to PM him again, because I sent a message asking to order on the 12th and still have no reply.

zunimasa

newbie

Activity: 11

Merit: 0

I am on OS X Mavericks:

bfgminer 3.6.0
cgminer 3.8.1

Below is what I get when I run cgminer --ndevs:

./cgminer --ndevs
[2013-11-15 15:38:52] USB all: found 19 devices - listing known devices
.USB dev 0: Bus 250 Device 7 ID: 03eb:204b
Manufacturer: 'BFMG'
Product: 'Bitfury BF1'
.USB dev 1: Bus 250 Device 15 ID: 10c4:ea60
Manufacturer: 'Silicon Labs'
Product: 'CP2102 USB to UART Bridge Controller'
.USB dev 2: Bus 250 Device 14 ID: 10c4:ea60
Manufacturer: 'Silicon Labs'
Product: 'CP2102 USB to UART Bridge Controller'
.USB dev 3: Bus 250 Device 13 ID: 10c4:ea60
Manufacturer: 'Silicon Labs'
Product: 'CP2102 USB to UART Bridge Controller'
.USB dev 4: Bus 250 Device 12 ID: 10c4:ea60
Manufacturer: 'Silicon Labs'
Product: 'CP2102 USB to UART Bridge Controller'
.USB dev 5: Bus 250 Device 11 ID: 10c4:ea60
Manufacturer: 'Silicon Labs'
Product: 'CP2102 USB to UART Bridge Controller'
.USB dev 6: Bus 250 Device 10 ID: 10c4:ea60
Manufacturer: 'Silicon Labs'
Product: 'CP2102 USB to UART Bridge Controller'
[2013-11-15 15:38:52] 7 known USB devices

So it can see it, but I just cant get it to mine with it. Do I have to run two different instances of bfgminer and or cgminer?

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

Quote from: zunimasa on November 15, 2013, 05:27:05 PM

I just received mine from him today! Now I just have to figure out how to get it to work.. I am currently using bfgminer, but its not picking it up.

they are hard to start. what bfg miner do you use? use 3.6.0

and did you load the drivers. I will look for the youtube video link on driver loading.

http://www.youtube.com/watch?v=eUtcah8iSNE

this lets you do windows 7 drivers above

http://luke.dashjr.org/programs/bitcoin/files/bfgminer/

use 3.6.0 for windows 7

once you have the driver loaded and you have done bfgminer up to the point of

password click the reset button on the stick then press enter on the password to start bfgminer fast boom boom. if you wait too long before hitting the start of bfgminer after you hit reset it can freeze.

zunimasa

newbie

Activity: 11

Merit: 0

I just received mine from him today! Now I just have to figure out how to get it to work.. I am currently using bfgminer, but its not picking it up.

philipma1957

legendary

Activity: 4256

Merit: 8551

'The right to privacy matters'

I am waiting for my three. we spoke via pm on the ~~11th~~ make that the 14th . I ordered the ~~8th~~ make that the 9th. I am getting a bit nervous .

I will go back and check dates.

I checked the dates I sent the money for 3 on the 9th.

I asked about them on the 13th he replied on the 14th. So I will wait a bit for them. I am hoping all is well. He did let me use paypal so I am protected.

1st shipment was fast. I would think that holidays are starting up I should see them soon.. It does not make sense that he would let me use paypal and not ship.

Most likely this is a Post office issue.

squishybearz

newbie

Activity: 14

Merit: 0

I ordered 1 red fury on 11/11 and I haven't heard a peep from him since. However, he did confirm receiving my payment.

beavertank

member

Activity: 94

Merit: 10

.

Has anyone gotten a reply from oaxaca in the last few days? I PMed him asking to order two days ago and haven't heard a peep since.

likeBTC

full member

Activity: 151

Merit: 100

Quote from: albon on November 14, 2013, 11:37:18 AM

Any chance of a price reduction as BTC has gone well over $400 now?

0.25 ?

Topic: [SOLD OUT] RED FURY - USB Miners - USA Group Buy - page 2. (Read 8918 times)