Looking at profitability charts something seems wrong, I went on whatomine and it suggested to switch back to ethereum , due to the power/hash combination of cnv8 vs ethhash.
Something is really off becase when i moved my rigs to ethereum from cnv8 my power use went up by 4 amps
that basically an extra amp per rig nearly. that is around 1000 watts at 240V.
someone needs to correct the power use calculation used by the profit calcs . V8 uses more power than v7 but no where near close to ether as the calcs have it
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 106. (Read 237247 times)
November 09, 2018, 10:44:16 PM
November 09, 2018, 08:47:08 PM
Hi.
Please, help me to understand the values of intensity parameter... (I'am trying to get maximum hashrate without HW errors)
In other miners it's calculated from the number of shaders, but there is a results such as 768, 896, etc.. In SRBMiner there is some values between 1-300. How they are correlated with the standart values? For example, intensity of 58 = ??
And what formula I should use for calculations, if I know mem size and number of shaders?
Maybe, someone can share their "intensity" and "worksize" settings for RX560, RX570/580? (interested in normal and heavy/haven algos)
Also, is there any way to get per-card statistics in SRBMiner? Accepted, rejected, HW errors...
Will be gratefull for help.
Please, help me to understand the values of intensity parameter... (I'am trying to get maximum hashrate without HW errors)
In other miners it's calculated from the number of shaders, but there is a results such as 768, 896, etc.. In SRBMiner there is some values between 1-300. How they are correlated with the standart values? For example, intensity of 58 = ??
And what formula I should use for calculations, if I know mem size and number of shaders?
Maybe, someone can share their "intensity" and "worksize" settings for RX560, RX570/580? (interested in normal and heavy/haven algos)
Also, is there any way to get per-card statistics in SRBMiner? Accepted, rejected, HW errors...
Will be gratefull for help.
November 09, 2018, 07:11:04 PM
What is the best way to disable GPU in conf?
i.e -di in Claymore
i.e -di in Claymore
for example if you want to use gpu 0,2,4,5 :
Code:
"gpu_conf" :
[
{ "id" : 0, "intensity" : 50, "worksize" : 8, "threads" : 2},
{ "id" : 2, "intensity" : 45, "worksize" : 8, "threads" : 2},
{ "id" : 4, "intensity" : 40, "worksize" : 8, "threads" : 2},
{ "id" : 5, "intensity" : 55, "worksize" : 8, "threads" : 2}
]
November 09, 2018, 06:53:35 PM
What is the best way to disable GPU in conf?
i.e -di in Claymore
i.e -di in Claymore
November 09, 2018, 04:45:57 PM
4GB and 8GB dont hash the same. on Monero 8gb is slower on CNheavy is where the 8gb shines like 1100hs+
not exactly, on 8GB sometimes intensity 64 works better then 58 or 71. November 09, 2018, 02:35:08 PM
Try this setup with that bios 6x580 1180/2150 900mv/950mv 942 per card 780w
{
"cryptonight_type" : "normalv8",
"intensity" : 100,
"double_threads" : true,
"worksize" : 8,
"threads" : 2,
"fragments" : 16,
"bralock" : 50
}
https://dodaj.rs/images/780w.jpg
If anybody have better setup pls give us
{
"gpu_conf" :
[
{ "id" : 0, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 1, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 2, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 3, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 4, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 5, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16}
]
}
OC C:1265/900mv M:2090/850mV (samsung) oko 725W ceo rig
RX 580 Nitro+ 4gb
Driver 18.6.1
Kernel compiled with SRB 1.6.9 miner
Memory straps OTC Polaris (SRB Polaris used also PIMP my straps)
Result
https://imgur.com/bwqBRNt
4GB and 8GB dont hash the same. on Monero 8gb is slower on CNheavy is where the 8gb shines like 1100hs+
November 09, 2018, 12:50:21 PM
Try this setup with that bios 6x580 1180/2150 900mv/950mv 942 per card 780w
{
"cryptonight_type" : "normalv8",
"intensity" : 100,
"double_threads" : true,
"worksize" : 8,
"threads" : 2,
"fragments" : 16,
"bralock" : 50
}
https://dodaj.rs/images/780w.jpg
If anybody have better setup pls give us
{
"gpu_conf" :
[
{ "id" : 0, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 1, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 2, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 3, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 4, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16},
{ "id" : 5, "cryptonight_type" : "normalv8", "intensity" : 58, "worksize" : 8, "double_threads" : true, "fragments" : 16}
]
}
OC C:1265/900mv M:2090/850mV (samsung) oko 725W ceo rig
RX 580 Nitro+ 4gb
Driver 18.6.1
Kernel compiled with SRB 1.6.9 miner
Memory straps OTC Polaris (SRB Polaris used also PIMP my straps)
Result
November 09, 2018, 12:33:52 PM
Hi, I have some questions some of you may be able to answer for me.. (using Strix Vega56s non flashed latest drivers) /w SRB miner.
I was reading thru setting everything up that's all good. Works well but decided to also try out OverdriveNTool (latest version) based on some of the posts I've seen..
Questions:
My first 5 Power states appear to reset I apply them P6/7 get applied. Is this normal? If not how do I correct that? (I've tried refresh/reload)
Also wondering if these settings take after a restart of the computer, They don't appear to.. at least not fully.
So far my workaround has been to start the computer.. Run Overdrive tool Loading a saved setting. Then use afterburner to manually set some things. Getting 1740H Per card (have 2 cards mining xmr) /w temps 52/55C Powerdraw 470W roughly total system (ryzen cpu mining to) So apparently it's sort of working... but i do have to rerun Overdrive everytime I reboot.. and I do have to use afterburner to adjust.
(Note before using overdrivetool I'd simply undervolt with afterburner by -131 set pl to 70% Core to 1400 mem to 880 but temps would be 60/69c for the cards and about 150w more system power)
I was reading thru setting everything up that's all good. Works well but decided to also try out OverdriveNTool (latest version) based on some of the posts I've seen..
Questions:
My first 5 Power states appear to reset I apply them P6/7 get applied. Is this normal? If not how do I correct that? (I've tried refresh/reload)
Also wondering if these settings take after a restart of the computer, They don't appear to.. at least not fully.
So far my workaround has been to start the computer.. Run Overdrive tool Loading a saved setting. Then use afterburner to manually set some things. Getting 1740H Per card (have 2 cards mining xmr) /w temps 52/55C Powerdraw 470W roughly total system (ryzen cpu mining to) So apparently it's sort of working... but i do have to rerun Overdrive everytime I reboot.. and I do have to use afterburner to adjust.
(Note before using overdrivetool I'd simply undervolt with afterburner by -131 set pl to 70% Core to 1400 mem to 880 but temps would be 60/69c for the cards and about 150w more system power)
November 09, 2018, 11:18:05 AM
is SRB 1.6.9 working on win 10 LTSC version? I got hangs after 1 min of miner work...
November 09, 2018, 10:15:50 AM
Anyone setup for 580 8gb Sapphire Nitro Hynix memory Monero algo
One click Bios mod with srbpolaris bios editor
Sapphire Nitro+ 580 - 8gb
925 H/s [1250 core / 2250 memory] Intensity: 58 Worksize: 8 Threads: 2
{
"cryptonight_type" : "normalv8",
"intensity" : 100,
"double_threads" : true,
"worksize" : 8,
"threads" : 2,
"fragments" : 16,
"bralock" : 50
}
https://dodaj.rs/images/780w.jpg
If anybody have better setup pls give us
Ill try this also and report back, It's just weird how the 4gb cards hash at 1015+ and the 8gb are between 925-975
November 09, 2018, 10:11:12 AM
@jazz1984 i try 1180/2200-2250 980-990hash per card but unstable for now.
November 09, 2018, 09:33:08 AM
I'm using the blockchain driver and 1.6.8 version miner in my rigs results for me I use the GPU's RX 580 and rx 570 very nice hash rate and stable working.
November 09, 2018, 08:34:43 AM
Anyone setup for 580 8gb Sapphire Nitro Hynix memory Monero algo
One click Bios mod with srbpolaris bios editor
Sapphire Nitro+ 580 - 8gb
925 H/s [1250 core / 2250 memory] Intensity: 58 Worksize: 8 Threads: 2
{
"cryptonight_type" : "normalv8",
"intensity" : 100,
"double_threads" : true,
"worksize" : 8,
"threads" : 2,
"fragments" : 16,
"bralock" : 50
}
https://dodaj.rs/images/780w.jpg
If anybody have better setup pls give us
November 09, 2018, 08:12:40 AM
Anyone setup for 580 8gb Sapphire Nitro Hynix memory Monero algo
One click Bios mod with srbpolaris bios editor
Sapphire Nitro+ 580 - 8gb
925 H/s [1250 core / 2250 memory] Intensity: 58 Worksize: 8 Threads: 2
{
"cryptonight_type" : "normalv8",
"intensity" : 100,
"double_threads" : true,
"worksize" : 8,
"threads" : 2,
"fragments" : 16,
"bralock" : 50
}
https://dodaj.rs/images/780w.jpg
If anybody have better setup pls give us
November 09, 2018, 08:03:23 AM
Anyone setup for 580 8gb Sapphire Nitro Hynix memory Monero algo
One click Bios mod with srbpolaris bios editor
Sapphire Nitro+ 580 - 8gb
925 H/s [1250 core / 2250 memory] Intensity: 58 Worksize: 8 Threads: 2
November 09, 2018, 06:23:33 AM
Now testing srbminer 1.6.9 on my rx470 4Gb. It has some modded bios (i think for eth) with 1210/1700 clocks. Now i have stable result almost 480 H/s with i55 w16 t1 f4 with consumtion (AB) 50W (powlim -50).
Driver 18.6.1, win 7/64.
Driver 18.6.1, win 7/64.
November 08, 2018, 07:38:21 PM
I was looking for Nitro models, but at the beginning of this year there were non in here, and I could only find the Strix of all the customs. Took another 2 months to find another, eh. Everything worked fine before, while I was mining on either NiceHash, ETN with cryptonight, and even XMR on Cryptonote. Even while I still had Ryzen system and GPUs were so close to each other, and the upper card had at least 10 degrees more than the lower GPU. Not sure what's happening lately. I'm also experiencing BSODs, with thread stuck in device driver, or video memory management internal. But again, so random. The last one was after nearly 24hrs of non-stop mining. Sometimes it takes a couple of hours, sometimes minutes… Oh, well.
I have 6 x Vega64 Asus Strix, also I have 1 Nitro Vega 64, there is not difference, maybe ASUS has 3 years warranty and Nitro 2. So I prefer ASUS
I have also a lot of reference model from Sapphire Vega64. All are the same for me, I use the same recipe: Win 10 installed (usually latest version so no need to update), install AMD drivers, install AB, apply PPT, disable ULPS and Crossfire from regedit -> all are hashing with ~1900 h/s 24/7 no matter the vendor. November 08, 2018, 05:46:59 PM
I was looking for Nitro models, but at the beginning of this year there were non in here, and I could only find the Strix of all the customs. Took another 2 months to find another, eh. Everything worked fine before, while I was mining on either NiceHash, ETN with cryptonight, and even XMR on Cryptonote. Even while I still had Ryzen system and GPUs were so close to each other, and the upper card had at least 10 degrees more than the lower GPU. Not sure what's happening lately. I'm also experiencing BSODs, with thread stuck in device driver, or video memory management internal. But again, so random. The last one was after nearly 24hrs of non-stop mining. Sometimes it takes a couple of hours, sometimes minutes… Oh, well.
November 08, 2018, 05:41:46 PM
I use that with OD v.0.2.6 on my Sapphire V64 nitro+:
GPU_P0=852;800
GPU_P1=991;820
GPU_P2=1084;825
GPU_P3=1138;850
GPU_P4=1150;910
GPU_P5=1202;875
GPU_P6=1212;875
GPU_P7=1478;920
Mem_P0=167;800
Mem_P1=500;800
Mem_P2=800;825
Mem_P3=1100;910
Fan_Min=400
Fan_Max=2400
Fan_Target=40
Fan_Acoustic=0
Power_Temp=65
Power_Target=0
Try to set target temp to 50C to look what should happen.
November 08, 2018, 05:33:27 PM
Jump to: