SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 139.

_ap_

newbie

Activity: 28

Merit: 0

Quote from: ?? on ??

Quote from: _ap_ on October 12, 2018, 01:30:08 PM

Quote from: _ap_ on October 11, 2018, 07:32:22 AM

1.6.8 hashrates is lower for me Sad

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8. Sad

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

Set intensity by hand, i lowered the auto intensity values a little bit.
You probably know the previous auto intensity value.

I tried these (in chronological order):
auto intensity 1.6.7 = 29. Results: 760/740
auto intensity 1.6.8 = 29. Results: 736/706
manual intensity 1.6.8 = 29. Results: 748/730
manual intensity 1.6.8 = 29.5 Results: 760/740
manual intensity 1.6.8 = 29.9 Results: crash miner
manual intensity 1.6.8 = 29.7 Results: crash miner
manual intensity 1.6.8 = 29.6 Results: windows crash Cheesy

manual intensity 1.6.8 = 29.6 again. Results: crash miner

So, the hashrate with manual mode are same with the 1.6.7 auto mode.

Thanks!

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: _ap_ on October 12, 2018, 01:30:08 PM

Quote from: _ap_ on October 11, 2018, 07:32:22 AM

1.6.8 hashrates is lower for me Sad

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8. Sad

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

I don't know what is happening there but i ran 2 tests on TUBE:

Intensity:28
Worksize:8
Threads:2

Rx470 4g Sapphire Nitro [1050/1950]
1.6.7 : 588 HS
1.6.8 : 613 HS

This is the latest 1.6.8 i uploaded today.

_ap_

newbie

Activity: 28

Merit: 0

Quote from: _ap_ on October 11, 2018, 07:32:22 AM

1.6.8 hashrates is lower for me Sad

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7

I tried the new 1.6.8 version, the result was worse than previous 1.6.8. Sad

rx470: 706H/s
rx570: 736H/s

I= 0, T=2, WS=8

abg00

jr. member

Activity: 288

Merit: 1

Quote from: nichevo on October 12, 2018, 05:36:31 AM

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

some card dont work mem 1500
need try. but possible core 1150

r7-265 card work 1200\1500

jazz1984

jr. member

Activity: 392

Merit: 5

Quote from: nichevo on October 12, 2018, 05:36:31 AM

Quote from: jazz1984 on October 12, 2018, 04:53:28 AM

Quote from: doktor83 on October 12, 2018, 12:52:33 AM

PITCAIRN guys, re-download 1.6.8, compilation fixed Cool

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

Its really interesting result: on 1000/1500 hashrate increased to 495 H/s,
but increasing the memory frequency by at least 1mhz above 1500 results in a drop of hashrate to above 430-440. For now works at 1000/1500, if this clocks will be stable then later try to overclock the core. Thank you a lot, i thought that memory overclocking on this video card does not lead to improved results without modifying the timings.

nichevo

newbie

Activity: 2

Merit: 0

Quote from: jazz1984 on October 12, 2018, 04:53:28 AM

Quote from: doktor83 on October 12, 2018, 12:52:33 AM

PITCAIRN guys, re-download 1.6.8, compilation fixed Cool

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

Try 1100 core, 1500 mem, for me, go over 520-550 H/s

jazz1984

jr. member

Activity: 392

Merit: 5

Quote from: doktor83 on October 12, 2018, 12:52:33 AM

PITCAIRN guys, re-download 1.6.8, compilation fixed Cool

My 7970 [Intensity 27.0][W: 4][T: 2] 485H/s with 1000 core/1375 memory(memory by default), now it is the fastest results for my clocks.

abg00

jr. member

Activity: 288

Merit: 1

Quote from: doktor83 on October 12, 2018, 12:52:33 AM

PITCAIRN guys, re-download 1.6.8, compilation fixed Cool

auto 22-23 low rate/ need 28-30

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: sky2018miner on October 12, 2018, 02:47:31 AM

good job
everything is working
thank you very much

[2018-10-12 10:43:58] CPU AES-NI: FALSE
[2018-10-12 10:43:58] GPU0: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-12 10:43:58] GPU1: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 10]
[2018-10-12 10:43:58] GPU2: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-12 10:43:58] GPU3: AMD Radeon R7 200 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 9]
[2018-10-12 10:43:58] GPU4: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 12.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-12 10:43:58] GPU5: AMD Radeon R9 200 Series [tonga] [2048 MB][Intensity 28.0][W: 4][T: 2][K: 1][BUS: 8]

now this is a mixed rig Cool

sky2018miner

newbie

Activity: 33

Merit: 0

good job
everything is working
thank you very much

[2018-10-12 10:43:50] Miner version: 1.6.8
[2018-10-12 10:43:50] Windows version: 10.0 build 16299
[2018-10-12 10:43:50] Video driver version: 24.20.11019.1004
[2018-10-12 10:43:58] AMD Platform ID: 0
[2018-10-12 10:43:58] AMD platform FOUND
[2018-10-12 10:43:58] Found 6 AMD devices
[2018-10-12 10:43:58] CPU AES-NI: FALSE
[2018-10-12 10:43:58] GPU0: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-12 10:43:58] GPU1: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 10]
[2018-10-12 10:43:58] GPU2: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-12 10:43:58] GPU3: AMD Radeon R7 200 Series [pitcairn] [2048 MB][Intensity 27.5][W: 8][T: 2][K: 1][BUS: 9]
[2018-10-12 10:43:58] GPU4: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 12.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-12 10:43:58] GPU5: AMD Radeon R9 200 Series [tonga] [2048 MB][Intensity 28.0][W: 4][T: 2][K: 1][BUS: 8]
[2018-10-12 10:43:58] ADL is enabled
[2018-10-12 10:43:58] CryptonightV7 mode enabled
[2018-10-12 10:43:58] Starting init of mining threads
[2018-10-12 10:43:58] Heating up system, please wait...
[2018-10-12 10:43:58] Created OCL context
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-12 10:43:58] Loading kernel for DEVICE BUS ID 7 ...
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-10-12 10:43:58] Loading kernel for DEVICE BUS ID 7 ...
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-10-12 10:43:58] Loading kernel for DEVICE BUS ID 10 ...
[2018-10-12 10:43:58] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-10-12 10:43:58] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-10-12 10:43:58] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 10 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 2 (Thread 4)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 2 (Thread 4)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 2 (Thread 4)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 3 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 2 (Thread 5)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 2 (Thread 5)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 2 (Thread 5)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 3 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 3 (Thread 6)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 3 (Thread 6)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 3 (Thread 6)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 9 ...
[2018-10-12 10:43:59] Created OCL command queue for DeviceID 3 (Thread 7)
[2018-10-12 10:43:59] Created OCL input buffer for DeviceID 3 (Thread 7)
[2018-10-12 10:43:59] Created OCL output buffer for DeviceID 3 (Thread 7)
[2018-10-12 10:43:59] Loading kernel for DEVICE BUS ID 9 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 4 (Thread Cool

[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 4 (Thread Cool

[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 4 (Thread Cool

[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 4 (Thread 9)
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 4 (Thread 9)
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 4 (Thread 9)
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 5 (Thread 10)
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 5 (Thread 10)
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 5 (Thread 10)
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 8 ...
[2018-10-12 10:44:00] Created OCL command queue for DeviceID 5 (Thread 11)
[2018-10-12 10:44:00] Created OCL input buffer for DeviceID 5 (Thread 11)
[2018-10-12 10:44:00] Created OCL output buffer for DeviceID 5 (Thread 11)
[2018-10-12 10:44:00] Loading kernel for DEVICE BUS ID 8 ...
[2018-10-12 10:44:01] ADL initialised successfully!
[2018-10-12 10:44:01] Finished init of mining threads
[2018-10-12 10:44:01] Main pool: xmr-eu1.nanopool.org:14444
[2018-10-12 10:44:01] Gpu watchdog started
[2018-10-12 10:44:01] API disabled
[2018-10-12 10:44:01] json_send: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"4A5hJyu2FvuM2azexYssHW2odrNCNWVqLLmzCowrA57xGJLNufXfzVgcMpAy3YWpzZSAPALhVH4Ed7x o6RZYyw2bUtbm12g.donation","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.6.8","rigid":""}}
[2018-10-12 10:44:01] json_receive: {"id":1,"jsonrpc":"2.0","result":{"id":"1","job":{"blob":"0707aca181de05cd0c1ca25cd8b65e8cda27426fe4f8e2e7c7dc6c99165557b4113ccf23a3dfe20 00000009160657ad106a7242c8bf36e330bdfcb72fcdf4a167ef857d6b7b35256611e7803","job_id":"9390","target":"cf8b0000"},"status":"OK"},"error":null}
[2018-10-12 10:44:01] Connected to xmr-eu1.nanopool.org:14444
[2018-10-12 10:44:01] sock_ready: User logged in
[2018-10-12 10:44:01] pool_have_job: Pool sent a new job (ID: 9390)
[2018-10-12 10:44:08] miner_result: Sending user result to pool
[2018-10-12 10:44:08] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"1","job_id":"9390","nonce":"14aeaa6a","result":"870fae4ec6012a9d74c6d243022d1c29f8b8e32a6f9d825324aeffcaa7370000"}}
[2018-10-12 10:44:08] json_receive: {"id":1,"jsonrpc":"2.0","result":{"status":"OK"},"error":null}
[2018-10-12 10:44:08] miner_result: Pool accepted result 0x000037A7
[2018-10-12 10:44:23] hashrate: GPU0: 440 H/s [BUS:7]
[2018-10-12 10:44:24] ADL2_Overdrive5_FanSpeed_Get for ADL index 63 failed.
[2018-10-12 10:44:24] hashrate: GPU1: 440 H/s [BUS:10]
[2018-10-12 10:44:24] hashrate: GPU2: 468 H/s [BUS:3]
[2018-10-12 10:44:24] ADL2_Overdrive5_FanSpeed_Get for ADL index 79 failed.
[2018-10-12 10:44:24] hashrate: GPU3: 434 H/s [BUS:9]
[2018-10-12 10:44:24] hashrate: GPU4: 406 H/s [BUS:1]
[2018-10-12 10:44:24] hashrate: GPU5: 542 H/s [BUS:8]
[2018-10-12 10:44:24] hashrate: Total: 2730 H/s
[2018-10-12 10:44:38] json_receive: {"jsonrpc":"2.0","method":"job","params":{"blob":"0707e8a181de05cd0c1ca25cd8b65e8cda27426fe4f8e2e7c7dc6c99165557b4113ccf23a3dfe20 00000003883fa04450e91c6d2cd0f510127c1940bbb8ed6407e1007304ee72e8edd30cc07","job_id":"9391","target":"cf8b0000"}}
[2018-10-12 10:44:38] pool_have_job: Pool sent a new job (ID: 9391)

doktor83

hero member

Activity: 2548

Merit: 626

PITCAIRN guys, re-download 1.6.8, compilation fixed Cool

TigTex

jr. member

Activity: 55

Merit: 5

Just to let you guys know

I've enabled my onboard intel graphics and use it at the primary display and all my other discrete gpu's don't have any display connected to them
This reduced the VRAM usage from 200mb to 8mb on every AMD gpu. Only side effect is that you will need to uninstall all your AMD cards before installing the intel driver or you might not be able to boot to windows.
Lower vram usage means that you can increase the mining intensity and have slightly better hashing performance. It also increased stability and system responsiveness because windows doesn't use those gpu's for nothing more than mining and the display is now handled by the IGP. If any or all AMD gpus crash, you will still be able to reset the gpu clocks with overdriventool or reboot the system safely

Hope this helps someone

sky2018miner

newbie

Activity: 33

Merit: 0

new attempt
without changes

[2018-10-12 00:58:52] Miner version: 1.6.8
[2018-10-12 00:58:52] Windows version: 10.0 build 16299
[2018-10-12 00:58:52] Video driver version: 24.20.11019.1004
[2018-10-12 00:59:00] AMD Platform ID: 0
[2018-10-12 00:59:00] AMD platform FOUND
[2018-10-12 00:59:00] Found 6 AMD devices
[2018-10-12 00:59:00] CPU AES-NI: FALSE
[2018-10-12 00:59:00] GPU0: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 10.0][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-12 00:59:00] GPU1: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 10.0][W: 8][T: 2][K: 1][BUS: 10]
[2018-10-12 00:59:00] GPU2: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 10.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-12 00:59:00] GPU3: AMD Radeon R7 200 Series [pitcairn] [2048 MB][Intensity 10.0][W: 8][T: 2][K: 1][BUS: 9]
[2018-10-12 00:59:00] GPU4: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 10.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-12 00:59:00] GPU5: AMD Radeon R9 200 Series [tonga] [2048 MB][Intensity 10.0][W: 8][T: 2][K: 1][BUS: 8]
[2018-10-12 00:59:00] ADL is disabled
[2018-10-12 00:59:00] CryptonightV7 mode enabled
[2018-10-12 00:59:00] Starting init of mining threads
[2018-10-12 00:59:00] Heating up system, please wait...
[2018-10-12 00:59:00] Created OCL context
[2018-10-12 00:59:00] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-12 00:59:00] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-12 00:59:00] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-12 00:59:00] Compiling kernel for DEVICE BUS ID 7 ...

dubsound

newbie

Activity: 10

Merit: 0

Quote from: doktor83 on October 11, 2018, 08:06:28 AM

FIXED 1.6.8 IS UP AGAIN ON MEGA

Hopefully this is the last fix of 1.6.8, and it should compile now on pitcairns, hawaiis etc..

I also rewrote the resources freeing code on miner shutdown/restart, so it may take now a little longer to close the miner, but this should solve the problems with driver sometimes crashing on miner close.

If you want to use the old, faster shutdown method, you can use the --forcedshutdown parameter , added in start.bat

Also i changed my mind and no more normal and maxi versions, only maxi. Because no one notices the big message on the first page that says which drivers should be used

Please report if hawaiis and pitcairns compile now.
Thanks

COOL!, Thanks so much!
hawaii works
MSI R9 390x
1.1ghz/1.65ghz core/mem

Code:

[2018-10-12 04:33:23] Miner version: 1.6.8
[2018-10-12 04:33:23] Windows version: 6.1 build 7601
[2018-10-12 04:33:24] Video driver version: 24.20.11021.1000
[2018-10-12 04:33:27] AMD Platform ID: 0
[2018-10-12 04:33:27] AMD platform FOUND
[2018-10-12 04:33:27] Found 1 AMD devices
[2018-10-12 04:33:27] CPU AES-NI: FALSE
[2018-10-12 04:33:27] GPU0: AMD Radeon (TM) R9 390 Series [hawaii] [8192 MB][Intensity 30.0][W: 8][T: 3][K: 1][BUS: 1]
[2018-10-12 04:33:27] ADL is enabled
[2018-10-12 04:33:27] CryptonightV7 mode enabled
[2018-10-12 04:33:27] Starting init of mining threads
[2018-10-12 04:33:27] Heating up system, please wait...
[2018-10-12 04:33:27] Created OCL context
[2018-10-12 04:33:29] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-12 04:33:29] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-12 04:33:29] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-12 04:33:29] Compiling kernel for DEVICE BUS ID 1 ...
[2018-10-12 04:33:38] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-10-12 04:33:38] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-10-12 04:33:38] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-10-12 04:33:38] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 04:33:38] Created OCL command queue for DeviceID 0 (Thread 2)
[2018-10-12 04:33:38] Created OCL input buffer for DeviceID 0 (Thread 2)
[2018-10-12 04:33:38] Created OCL output buffer for DeviceID 0 (Thread 2)
[2018-10-12 04:33:38] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 04:33:38] ADL initialised successfully!
[2018-10-12 04:33:38] Finished init of mining threads
[2018-10-12 04:33:38] Main pool: xmr-eu.dwarfpool.com:8050
[2018-10-12 04:33:38] Gpu watchdog started
[2018-10-12 04:33:38] API disabled
[2018-10-12 04:33:38] json_send: {"id":1,"jsonrpc": "2.0","method":"login","params":{"login":"4B872gtqTeTfyY8o6UGnuzbw79WrubhjzC9DHfvUXoJbYMmnVRFk1uu9QTacxaFkcA5mGoZarw3xxPF1uhaH9HV1ScTyM1u","pass":"x","agent":"SRBMiner Cryptonight AMD GPU miner/1.6.8","rigid":""}}
[2018-10-12 04:33:38] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"id":"281719175237230","job":{"blob":"0707c5fffedd0548ada109a05d128ad40e5ba968864817df08e9271454f2b79b33fe89679d335a000000004f2e31a932b80fcff5a1e0a2ebf473f4187f7c5a0c4849faa9e2f87ea737441402","job_id":"700833855057135","target":"8b4f0100"},"status":"OK"}}
[2018-10-12 04:33:38] Connected to xmr-eu.dwarfpool.com:8050
[2018-10-12 04:33:38] sock_ready: User logged in
[2018-10-12 04:33:38] pool_have_job: Pool sent a new job (ID: 700833855057135)
[2018-10-12 04:34:07] ADL2_OverdriveN_Temperature_Get for ADL index 5 failed.
[2018-10-12 04:34:07] ADL2_OverdriveN_FanControl_Get for ADL index 5 failed.
[2018-10-12 04:34:07] ADL2_OverdriveN_SystemClocksX2_Get for ADL index 5 failed.
[2018-10-12 04:34:07] ADL2_OverdriveN_MemoryClocksX2_Get for ADL index 5 failed.
[2018-10-12 04:34:07] hashrate: GPU0: 942 H/s [BUS:1]
[2018-10-12 04:34:07] hashrate: Total: 942 H/s

http://puu.sh/BJuZ0/000ac1d039.png

instasame

newbie

Activity: 3

Merit: 0

Hi!

I'm having some big trouble getting SRBMiner to work on a rig I have, I am greeted with this message after starting the miner:

"
Initializing OpenCL devices, please wait..

Press any key to continue . . ."

I've tried mining ETH with phoenixminer on the exact same setup on the rig and that works just fine, no issue at all but I cant for the love of god get SRBMiner to work on Cryptonight Heavy.

The rig consists of 12x Sapphire RX 580 Pulse.

Steps done with various reboots in between:

Install fresh windows
Update windows
Set Virtual memory to 120 GB
Install AMD driver 18.6.1
Set Hibernate to never
Set Compute mode
Turn off Cross-fire

Plus probably some extra steps I forgot now.

The logfile has the following output before quitting:
[2018-10-11 23:13:33] Miner version: 1.6.8
[2018-10-11 23:13:33] Windows version: 10.0 build 17134
[2018-10-11 23:13:34] Video driver version: 24.20.11021.1000

Config file:

{
"cryptonight_type" : "heavy",
"intensity" : 0,
"double_threads" : true,
"target_temperature" : 0,
"pool_use_tls" : false,
"pool" : "stratum+tcp://cryptonightheavy.eu.nicehash.com:3364",
"wallet" : "MYWALLET.RIGNAME",
"password" : "x",
"location" : "europe",

"gpu_conf" :
[
   { "id" : 0, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 1, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 2, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 3, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 4, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 5, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 6, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 7, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 8, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 9, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 10, "intensity" : 0, "worksize" : 8, "threads" : 2},
   { "id" : 11, "intensity" : 0, "worksize" : 8, "threads" : 2}
]
}

BAT file:

overdriventool -r00 -r01 -r02 -r03 -r04 -r05
overdriventool -r06 -r07 -r08 -r09 -r10 -r11

overdriventool -p01"pulse_580" -p01"pulse_580_2220_850" -p02"pulse_580_2240_850" -p03"pulse_580_2220_850" -p04"pulse_580_2180_850" -p05"pulse_580"
overdriventool -p06"pulse_580_2240_850" -p07"pulse_580_2240_850" -p08"pulse_580_2220_850" -p09"pulse_580_2220_850" -p10"pulse_580_2240_850" -p11"pulse_580_2220_850"

setx GPU_FORCE_64BIT_PTR 1
setx GPU_MAX_HEAP_SIZE 100
setx GPU_MAX_USE_SYNC_OBJECTS 1
setx GPU_MAX_ALLOC_PERCENT 100
setx GPU_MAX_SINGLE_ALLOC_PERCENT 100

@echo off
cd %~dp0

set LOGTIME=%date:~10,4%_%date:~4,2%_%date:~7,2%_%time:~0,2%_%time:~3,2%
set LOGTIME=%LOGTIME: =%
set LOGTIME=%LOGTIME:,=.%.txt

SRBMiner-CN.exe --config Config.txt --pools Pools.txt --logfile %LOGTIME% --gpureorder --apienable --apiport 21555 --apirigname miner
pause

Edit:
This is the MAXI version wih prebuilt binaries as well.

sky2018miner

newbie

Activity: 33

Merit: 0

hello
decided to test the new version
miner starts and crashes all auto settings
driver 18.5.2

[2018-10-11 23:17:02] Miner version: 1.6.8
[2018-10-11 23:17:02] Windows version: 10.0 build 16299
[2018-10-11 23:17:02] Video driver version: 24.20.11019.1004
[2018-10-11 23:17:10] AMD Platform ID: 0
[2018-10-11 23:17:10] AMD platform FOUND
[2018-10-11 23:17:10] Found 6 AMD devices
[2018-10-11 23:17:10] CPU AES-NI: FALSE
[2018-10-11 23:17:10] GPU0: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-11 23:17:10] GPU1: AMD Radeon (TM) R7 370 Series [pitcairn] [2048 MB][Intensity 23.0][W: 8][T: 2][K: 1][BUS: 10]
[2018-10-11 23:17:10] GPU2: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-11 23:17:10] GPU3: AMD Radeon R7 200 Series [pitcairn] [2048 MB][Intensity 26.0][W: 8][T: 2][K: 1][BUS: 9]
[2018-10-11 23:17:10] GPU4: Radeon(TM) RX 460 Graphics [baffin] [2048 MB][Intensity 25.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-11 23:17:10] GPU5: AMD Radeon R9 200 Series [tonga] [2048 MB][Intensity 27.0][W: 8][T: 2][K: 1][BUS: 8]
[2018-10-11 23:17:10] ADL is enabled
[2018-10-11 23:17:10] CryptonightV7 mode enabled
[2018-10-11 23:17:10] Starting init of mining threads
[2018-10-11 23:17:10] Heating up system, please wait...
[2018-10-11 23:17:10] Created OCL context
[2018-10-11 23:17:10] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-11 23:17:10] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-11 23:17:10] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-11 23:17:10] Compiling kernel for DEVICE BUS ID 7 ...

ViWe

newbie

Activity: 57

Merit: 0

V1.6.8
- Pools with different algos can now be used in pools.txt, miner will re-init on switch

does this also work with non-algoswitching mining (so without --usealgoswitching)?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: tvukoman on October 11, 2018, 02:13:10 PM

Doktore, txs for constant development

Just quick test new option: "bralock": 1-256, parameter to tune, it *may* add some extra hash, it can differ between algos

On V7 algo tested with RX570 4GB, Vega 64, Vega 56. Tried several parameter like: 1, 10, 33, 100, 150, 200, 256.

Don't see any benefits for V7 algo so far, but maybe i must wait longer before switching to another parameter in config file...

haha, better try 1,4,8,16,32,64 etc Cheesy

tvukoman

jr. member

Activity: 69

Merit: 5

Doktore, txs for constant development

Just quick test new option: "bralock": 1-256, parameter to tune, it *may* add some extra hash, it can differ between algos

On V7 algo tested with RX570 4GB, Vega 64, Vega 56. Tried several parameter like: 1, 10, 33, 100, 150, 200, 256.

Don't see any benefits for V7 algo so far, but maybe i must wait longer before switching to another parameter in config file...

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: hlbcal on October 11, 2018, 11:45:02 AM

Quote from: doktor83 on October 11, 2018, 08:06:28 AM

FIXED 1.6.8 IS UP AGAIN ON MEGA

Hopefully this is the last fix of 1.6.8, and it should compile now on pitcairns, hawaiis etc..

I also rewrote the resources freeing code on miner shutdown/restart, so it may take now a little longer to close the miner, but this should solve the problems with driver sometimes crashing on miner close.

If you want to use the old, faster shutdown method, you can use the --forcedshutdown parameter , added in start.bat

Also i changed my mind and no more normal and maxi versions, only maxi. Because no one notices the big message on the first page that says which drivers should be used

Please report if hawaiis and pitcairns compile now.
Thanks

Hi dok,

I still have the same issue. GPU hash rate drop to zero and miner crashed. V1.6.7 is stable, it does not have such issue.

[2018-10-12 00:08:48] watchdog: GPU1 [BUS: 1] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU2 [BUS: 4] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU3 [BUS: 2] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU4 [BUS: 7] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU5 [BUS: 8] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU6 [BUS: 3] hashing speed is 0 H/S
[2018-10-12 00:09:52] watchdog: GPU crash detected, miner will try to restart
[2018-10-12 00:09:52] Restarting miner process

[2018-10-12 00:09:53] Miner version: 1.6.8
[2018-10-12 00:09:53] Windows version: 10.0 build 16299
[2018-10-12 00:09:53] Video driver version: 24.20.11021.1000
[2018-10-12 00:11:36] AMD Platform ID: 1
[

You should lower intensity until your driver won't crash, so hashrate won't fall to 0 and miner won't restart.
It can happen that after driver crash opencl can't be initialised.
Try set that startup script and set overdriventtol to reset gpu's every time before run, maybe that will help.

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 139. (Read 237261 times)