Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 140. (Read 237261 times)

AMD Radeon R7 260X is Bonaire so it should work.
What error do you get, paste it here, or create a screenshot.

Hi dok,

I still have the same issue. GPU hash rate drop to zero and miner crashed. V1.6.7 is stable, it does not have such issue.

[2018-10-12 00:08:48] watchdog: GPU1 [BUS: 1] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU2 [BUS: 4] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU3 [BUS: 2] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU4 [BUS: 7] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU5 [BUS: 8] hashing speed is 0 H/S
[2018-10-12 00:08:48] watchdog: GPU6 [BUS: 3] hashing speed is 0 H/S
[2018-10-12 00:09:52] watchdog: GPU crash detected, miner will try to restart
[2018-10-12 00:09:52] Restarting miner process


[2018-10-12 00:09:53] Miner version: 1.6.8
[2018-10-12 00:09:53] Windows version: 10.0 build 16299
[2018-10-12 00:09:53] Video driver version: 24.20.11021.1000
[2018-10-12 00:11:36] AMD Platform ID: 1
[2018-10-12 00:11:36] AMD platform FOUND
[2018-10-12 00:11:36] Found 7 AMD devices
[2018-10-12 00:11:36] CPU AES-NI: TRUE
[2018-10-12 00:11:36] GPU0: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 6]
[2018-10-12 00:11:36] GPU1: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 1]
[2018-10-12 00:11:36] GPU2: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 4]
[2018-10-12 00:11:36] GPU3: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 2]
[2018-10-12 00:11:36] GPU4: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 7]
[2018-10-12 00:11:36] GPU5: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 8]
[2018-10-12 00:11:36] GPU6: Radeon RX 580 Series [ellesmere] [8192 MB][Intensity 56.0][W: 8][T: 2][K: 1][BUS: 3]
[2018-10-12 00:11:36] ADL is enabled
[2018-10-12 00:11:36] Algo switching mode enabled
[2018-10-12 00:11:36] Algo switch minimum time : 600 seconds
[2018-10-12 00:11:36] Cryptonight BitTube V2 mode enabled
[2018-10-12 00:11:36] Starting init of mining threads
[2018-10-12 00:11:36] Heating up system, please wait...
[2018-10-12 00:11:36] Created OCL context
[2018-10-12 00:11:36] Created OCL command queue for DeviceID 0 (Thread 0)
[2018-10-12 00:11:36] Created OCL input buffer for DeviceID 0 (Thread 0)
[2018-10-12 00:11:36] Created OCL output buffer for DeviceID 0 (Thread 0)
[2018-10-12 00:11:36] Loading kernel for DEVICE BUS ID 6 ...
[2018-10-12 00:11:36] Created OCL command queue for DeviceID 0 (Thread 1)
[2018-10-12 00:11:36] Created OCL input buffer for DeviceID 0 (Thread 1)
[2018-10-12 00:11:36] Created OCL output buffer for DeviceID 0 (Thread 1)
[2018-10-12 00:11:36] Loading kernel for DEVICE BUS ID 6 ...
[2018-10-12 00:11:37] Created OCL command queue for DeviceID 1 (Thread 2)
[2018-10-12 00:11:37] Created OCL input buffer for DeviceID 1 (Thread 2)
[2018-10-12 00:11:37] Created OCL output buffer for DeviceID 1 (Thread 2)
[2018-10-12 00:11:37] Loading kernel for DEVICE BUS ID 1 ...
[2018-10-12 00:11:37] Created OCL command queue for DeviceID 1 (Thread 3)
[2018-10-12 00:11:37] Created OCL input buffer for DeviceID 1 (Thread 3)
[2018-10-12 00:11:37] Created OCL output buffer for DeviceID 1 (Thread 3)
[2018-10-12 00:11:37] Loading kernel for DEVICE BUS ID 1 ...

I have problem with start srbminer 1.6.8 on rig with 4 r7 260x 1gb... I have not change any parameters... Just start AS IS... Does srbminer 1.6.8 supports old cards like 7790 or r7 260x?

Thanks dok!

So its offical that V8 will be slower than V7?

Everything works fine!

Hello everybody. I have  1 RX 580 and 2 RX 560. on other miners it works without problems, and on this miner in 2-3 minutes it hangs and reboots. I tried different settings and recommendations, but nothing helps.

Can i help you with any other informations?

yes, i am trying to tune every card separately, so too much cards and too much settings, i probably messed something for the 4xx 5xx series for heavy algos.

Intensity is 29 in auto mode (both cards). I tried 30, but the miner crashed. I tried 28, the hasrates was lower. I tried 29, the results was same. Which settings set up manually?

but rx560\4gb work better on 1.6.8
variable rate on 1.6.7 and stable high rate on 1.6.8
use 1.6.8 on cn-heavy for all rx560\4gb ( 3 rig 12 gpu each)

possibly heavy algos impacted. Wait for next version, until then use 1.6.7

same troube on cn-heavy. need to test new upload 1.6.8 or wait new version?

Going to investigate 

When version for linux?

So, how to use it?

Create a .bat file where you set for example overdriventool to reset your cards & apply profiles to them.
Let's call that file overclock.bat

Then in your start.bat add the --startupscript parameter to the end of line for example :


Now the overclock.bat will be run before the miner starts, so this way you can ensure that on every miner start you apply the overclocking settings.

If you meant the startup_script in algos.txt file, the principle is same, you just enter the overclock.bat filename in the algos.txt file as a value for the startup_script parameter.

FIXED 1.6.8 IS UP AGAIN ON MEGA

Hopefully this is the last fix of 1.6.8, and it should compile now on pitcairns, hawaiis etc..

I also rewrote the resources freeing code on miner shutdown/restart, so it may take now a little longer to close the miner, but this should solve the problems with driver sometimes crashing on miner close.

If you want to use the old, faster shutdown method, you can use the --forcedshutdown parameter , added in start.bat

Also i changed my mind and no more normal and maxi versions, only maxi. Because no one notices the big message on the first page that says which drivers should be used

Please report if hawaiis and pitcairns compile now.
Thanks

You need set gpu by hand, not use auto. Auto value lower in 1.6.8

Hi everyone,

mind sharing your configs for RX580 8GB please.
Sometimes miner starts and all cards hashing at 1000+ hs on cnheavy.
Miner restarts and back to around 860hs

Using v1.6.7 as v1.6.8 didn`t give me any hashing increases.

Also curious what intensity you running with v7 on 580?

Thanks

1.6.8 hashrates is lower for me

cards (both sapphire nitro+ 4gb) / hashrate 1.6.7 / hashrate 1.6.8
rx470 / 740 / 720
rx570 / 760 / 740

algo: bittubev2

i switch back to 1.6.7