can SRBMiner support HYCON? a modified V7 algo, https://github.com/Team-Hycon,thanks!
plz support HYCON mining,THX!where did you see a word about minerable HYCON ?
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 194. (Read 237263 times)
July 14, 2018, 12:46:23 AM
where did you see a word about minerable HYCON ?
July 13, 2018, 08:11:18 PM
can SRBMiner support HYCON? a modified V7 algo, https://github.com/Team-Hycon,thanks!
plz support HYCON mining,THX! July 13, 2018, 07:39:12 PM
Ok, thanks. I got it.
1.6.4. builds other heavy srb kernels. It have size about 2Mb as for cn-v7. And speed is some lower. If use srb builded 1.6.3 speed good, and size of srb kernel about 4Mb.
1.6.4. builds other heavy srb kernels. It have size about 2Mb as for cn-v7. And speed is some lower. If use srb builded 1.6.3 speed good, and size of srb kernel about 4Mb.
i did not touch cl kernels from 1.6.3 to 1.6.4, so probably you built on one driver , now with another, and maybe the compiler unrolls differently, that would explain the increased size.
July 13, 2018, 12:54:14 PM
DAMN 
saw the post of new version..downloaded from first page = version 1.6.3 = to fast action from me
not it works...THX
saw the post of new version..downloaded from first page = version 1.6.3 = to fast action from me
not it works...THX
You probably downloaded in those few minutes between when i uploaded it and updated the post here
What is Latency in json? Is it ping?
July 13, 2018, 12:21:47 PM
Hi doktor,
We can see the stale shares in statistics pressing s in your miner right?
We can see the stale shares in statistics pressing s in your miner right?
yes,
Accepted(Stale)/Total shares: 42(1)/42 (100.0%)
yes. cryptoknight.cc accept stale shares https://image.prntscr.com/image/eXbF2LQYQ3izJv78mZsUgw.jpg
July 13, 2018, 12:13:19 PM
1.6.2 BC driver vs 1.64 with 18.3.4 driver
HEAVY and TUBE algo
GPU 0-1-4 = vega 56(64bios)samsung (56/8/2)setup
gpu 2 = vega 64 Liquid (60/8/2)setup
With BC driver 1.6.4 have more error
With 18.3.4 gpu go more overclock:)
1.6.4 have more HR
18.3.4 driver not need disable/enable vega , and not need start with 60int first.
but if use v7 algo and back to heavy HBC memory not work.(need restart)
1.6.2 BC driver- this is maximal setup wtihout error
https://image.prntscr.com/image/14SysMMOQOS7zviWPlF-Yg.jpg
1.6.4. 18.43.4 driver without error
https://image.prntscr.com/image/A3SjEnciQ4C0yPzjnPuWPQ.jpg
HEAVY and TUBE algo
GPU 0-1-4 = vega 56(64bios)samsung (56/8/2)setup
gpu 2 = vega 64 Liquid (60/8/2)setup
With BC driver 1.6.4 have more error
With 18.3.4 gpu go more overclock:)
1.6.4 have more HR
18.3.4 driver not need disable/enable vega , and not need start with 60int first.
but if use v7 algo and back to heavy HBC memory not work.(need restart)
1.6.2 BC driver- this is maximal setup wtihout error
https://image.prntscr.com/image/14SysMMOQOS7zviWPlF-Yg.jpg
1.6.4. 18.43.4 driver without error
https://image.prntscr.com/image/A3SjEnciQ4C0yPzjnPuWPQ.jpg
we continue the test
This is NITRO+ vega 56 (hynix) stock bios. 1.8.34 driver not need enable/diable and not need first start with 60 int.
setup: 56/8/2.
With BC driver and 1.6.2 6*vega56 have 9000HR on heavya/tubethis is MAX setup without error.
https://image.prntscr.com/image/OZprQNZnRZeaKANVQADGkw.jpg
With 1.8.34 and 1.6.2 6*vega56 have 8250HR on heavya/tube
https://image.prntscr.com/image/nD9l8_AMTeqwAO1PQlHFGA.jpg
With 1.8.34 and 1.6.4 6*vega56 have 9150HR on heavya/tube
https://image.prntscr.com/image/Q0uhuB_qR5iIgC1oZW2v_Q.jpg
With 1.8.34 and 1.6.4 6*vega56 have 9230HR on heavya/tube MAX setup without error
https://image.prntscr.com/image/_5i2Iwj5SxmhLrd4gsN3fQ.jpg
and i try castXMR 1.2.5 with 1.8.34 driver. Setup is identical . i try int 7-8-9-19 but 8 is best for nitro vega 64.
https://image.prntscr.com/image/BTdIslYRQwqhOQVFwf9mwQ.jpg
July 13, 2018, 11:13:26 AM
Ok, thanks. I got it.
1.6.4. builds other heavy srb kernels. It have size about 2Mb as for cn-v7. And speed is some lower. If use srb builded 1.6.3 speed good, and size of srb kernel about 4Mb.
1.6.4. builds other heavy srb kernels. It have size about 2Mb as for cn-v7. And speed is some lower. If use srb builded 1.6.3 speed good, and size of srb kernel about 4Mb.
i did not touch cl kernels from 1.6.3 to 1.6.4, so probably you built on one driver , now with another, and maybe the compiler unrolls differently, that would explain the increased size.
July 13, 2018, 11:00:12 AM
I use 1.6.4 with --sendallstales option since 1.6.4 was released with nicehash heavy algo. No one stale share for all this time. It's normal? Recieved speed on nicehash less than speed in miner about 10-11%. It's abnormal I think. I look at period close to 24 hours.
Another one question: installing new drivers needs to rebuild srb kernel files?
Another one question: installing new drivers needs to rebuild srb kernel files?
You can use nicehash+heavy way before 1.6.4, i don't know where do you get this info from. Stale shares are not sent when using nicehash cause nicehash rejects ALL stale shares, so no point in sending them. 10-11% is much i agree.
Don't have to rebuild kernels after changing drivers, miner will work, but i would suggest you to rebuild them to be sure you are totally compatible with the drivers.
1.6.4. builds other heavy srb kernels. It have size about 2Mb as for cn-v7. And speed is some lower. If use srb builded 1.6.3 speed good, and size of srb kernel about 4Mb.
July 13, 2018, 10:53:08 AM
Hi doktor,
We can see the stale shares in statistics pressing s in your miner right?
We can see the stale shares in statistics pressing s in your miner right?
yes,
Accepted(Stale)/Total shares: 42(1)/42 (100.0%)
Thanks
July 13, 2018, 10:49:54 AM
Hi doktor,
We can see the stale shares in statistics pressing s in your miner right?
We can see the stale shares in statistics pressing s in your miner right?
yes,
Accepted(Stale)/Total shares: 42(1)/42 (100.0%)
July 13, 2018, 10:27:51 AM
I use 1.6.4 with --sendallstales option since 1.6.4 was released with nicehash heavy algo. No one stale share for all this time. It's normal? Recieved speed on nicehash less than speed in miner about 10-11%. It's abnormal I think. I look at period close to 24 hours.
Another one question: installing new drivers needs to rebuild srb kernel files?
Another one question: installing new drivers needs to rebuild srb kernel files?
You can use nicehash+heavy way before 1.6.4, i don't know where do you get this info from. Stale shares are not sent when using nicehash cause nicehash rejects ALL stale shares, so no point in sending them. 10-11% is much i agree.
Don't have to rebuild kernels after changing drivers, miner will work, but i would suggest you to rebuild them to be sure you are totally compatible with the drivers.
July 13, 2018, 09:53:06 AM
I use 1.6.4 with --sendallstales option since 1.6.4 was released with nicehash heavy algo. No one stale share for all this time. It's normal? Recieved speed on nicehash less than speed in miner about 10-11%. It's abnormal I think. I look at period close to 24 hours.
Another one question: installing new drivers needs to rebuild srb kernel files?
Another one question: installing new drivers needs to rebuild srb kernel files?
July 13, 2018, 08:36:33 AM
Hello
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
You probably got a lot stale shares, download latest 1.6.4 v and use --sendallstales parameter in bat, it will probably increase your effective hashrate
Doc, is there any quick way to know pool support your --sendallstales command. (U tell in previous post that some pool don't support and may lose hashrate/share, right?, correct me if i wrong).
I will test new ver.
Thanks
If the pool pays for stale shares then you will benefit from using --sendallstales, if it's not accepting stales you will get that stale share rejected. So there is nothing for you to loose.
What can happen is if you are mining on low difficulty and you find a lot of shares / minute, and your pool does not accept stale shares, and a job switch occurs and miner sends all those shares from the previous job, and the pool rejects them, and because you had a lot of rejects in short time, it can ban you for a time. This is the worse that can happen, but on pools that have vardiff set OK, and you find approx 6-10 shares / minute you can only win with this option turned on.
Hi doktor,
We can see the stale shares in statistics pressing s in your miner right?
July 13, 2018, 08:25:46 AM
Anyone Using the miner on a RX580 4gb on the bittubev2. I cant seem to get the miner to run on it. I tried all different Intensity settings.
July 13, 2018, 07:05:43 AM
Hello
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
You probably got a lot stale shares, download latest 1.6.4 v and use --sendallstales parameter in bat, it will probably increase your effective hashrate
Doc, is there any quick way to know pool support your --sendallstales command. (U tell in previous post that some pool don't support and may lose hashrate/share, right?, correct me if i wrong).
I will test new ver.
If the pool pays for stale shares then you will benefit from using --sendallstales, if it's not accepting stales you will get that stale share rejected. So there is nothing for you to loose.
What can happen is if you are mining on low difficulty and you find a lot of shares / minute, and your pool does not accept stale shares, and a job switch occurs and miner sends all those shares from the previous job, and the pool rejects them, and because you had a lot of rejects in short time, it can ban you for a time. This is the worse that can happen, but on pools that have vardiff set OK, and you find approx 6-10 shares / minute you can only win with this option turned on.
July 13, 2018, 06:06:04 AM
Hello
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
You probably got a lot stale shares, download latest 1.6.4 v and use --sendallstales parameter in bat, it will probably increase your effective hashrate
Doc, is there any quick way to know pool support your --sendallstales command. (U tell in previous post that some pool don't support and may lose hashrate/share, right?, correct me if i wrong).
I will test new ver.
July 13, 2018, 05:58:29 AM
Hello
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
You probably got a lot stale shares, download latest 1.6.4 v and use --sendallstales parameter in bat, it will probably increase your effective hashrate
July 13, 2018, 05:49:44 AM
Hello
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
I have a few rigs & have tried SRB miner for a few days now ,the hashrate is high compared to XMR-STAK & xmring .The only problem is that on the pool side its showing a reduced hashrate of 10-15% .What till be the reason for this ?.
I have used the same port as XMR stak
Thanks
July 12, 2018, 06:45:08 PM
1.6.2 BC driver vs 1.64 with 18.3.4 driver
HEAVY and TUBE algo
GPU 0-1-4 = vega 56(64bios)samsung (56/8/2)setup
gpu 2 = vega 64 Liquid (60/8/2)setup
With BC driver 1.6.4 have more error
With 18.3.4 gpu go more overclock:)
1.6.4 have more HR
18.3.4 driver not need disable/enable vega , and not need start with 60int first.
but if use v7 algo and back to heavy HBC memory not work.(need restart)
1.6.2 BC driver- this is maximal setup wtihout error
https://image.prntscr.com/image/14SysMMOQOS7zviWPlF-Yg.jpg
1.6.4. 18.43.4 driver without error
https://image.prntscr.com/image/A3SjEnciQ4C0yPzjnPuWPQ.jpg
HEAVY and TUBE algo
GPU 0-1-4 = vega 56(64bios)samsung (56/8/2)setup
gpu 2 = vega 64 Liquid (60/8/2)setup
With BC driver 1.6.4 have more error
With 18.3.4 gpu go more overclock:)
1.6.4 have more HR
18.3.4 driver not need disable/enable vega , and not need start with 60int first.
but if use v7 algo and back to heavy HBC memory not work.(need restart)
1.6.2 BC driver- this is maximal setup wtihout error
https://image.prntscr.com/image/14SysMMOQOS7zviWPlF-Yg.jpg
1.6.4. 18.43.4 driver without error
https://image.prntscr.com/image/A3SjEnciQ4C0yPzjnPuWPQ.jpg
July 12, 2018, 02:45:04 PM
bittubev2
RX 580 nitro+ 8G (samsung) cc/mc 1300/2050
int 54 ~ 1130 H/s
RX 580 nitro+ 8G (samsung) cc/mc 1300/2050
int 54 ~ 1130 H/s
Jump to: