SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 197.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: konstr2 on July 11, 2018, 11:54:16 AM

Hi all.
Have a problem: all cards on same BUS (BUSID:0), so the miner doesn`t work (because it can`t recognize cards separately).
Miner V1.6.3
somebody can help to solve this?
Thanks a lot!

not a miner issue, its a driver issue, change drivers

konstr2

newbie

Activity: 2

Merit: 0

Hi all.
Have a problem: all cards on same BUS (BUSID:0), so the miner doesn`t work (because it can`t recognize cards separately).
Miner V1.6.3
somebody can help to solve this?
Thanks a lot!

ofpcarnage

member

Activity: 76

Merit: 10

Hi everyone first time using this miner and I'm trying to find the best settings for my cards to run nice and stable yes efficiently

I have the rx480 8gb sapphire cards
I have the rx470 4gb sapphire cards
I have the Vega 64 Red Devil cards

What are the best settings to use when mining HEAVY (ALLOY)

As in Clock settings / power settings / and miner settings
Thanks in advance

doktor83

hero member

Activity: 2548

Merit: 626

OK, now at the bottom of the first post you can find settings for various cards, miner settings & overdriventool settings.
Livada sent settings for Vega cards (thank you).

If anyone wants to share his/her settings post it in form :

Vega 64

heavy/haven/bittubev2/italo : 60/8/2 ( ~1550+HR )
v7/stellitev7 : 120/16/2 ( ~2100/2200+HR )
fast : 120/16/2 ( ~4000+HR )

Also overdriventool settings in form :

Vega 64
GPU: P7 = 1478/920
MEM: P3 = 1100/910

roma__11

newbie

Activity: 115

Merit: 0

Quote from: livada on July 11, 2018, 04:00:37 AM

Quote from: roma__11 on July 10, 2018, 04:33:26 PM

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

Leave the temperature at rest, this peak load when everything is closed and in the room to 70 degrees, you can not hear me!
it is important that more than 6 and all ...
And only on FAST

dragonmike

hero member

Activity: 1274

Merit: 556

Quote from: zbucks_project on July 11, 2018, 07:07:13 AM

Consider mining zBucks with Cryptonight Heavy - Just announced, visit https://bitcointalksearch.org/topic/m.41775000

Consider getting a proper job and stop spamming your shitcoins here.

zbucks_project

copper member

Activity: 42

Merit: 0

Consider mining zBucks with Cryptonight Heavy - Just announced, visit https://bitcointalksearch.org/topic/m.41775000

Sonic-X

jr. member

Activity: 69

Merit: 2

Quote

Intensity: for all vega 56 card(samsung and hynix) with stock and 64 bios[/b]
Heavy/haven/tube/italo : 56/8/2 - 1550+HR
v7/stl : 112/16/2 or 120/8/2 - 2000+HR
fast : 112/16/2 or 120/8/2 - 3800/3900HR
lite/litev7 : 234/8/2 - 4200HR

vega 64 intensity:
Heavy/haven/tube/italo : 60/8/2 - 1550HR
v7/stl : 120/16:2 - 2100/2200HR
fast : 120/16/2 - 4000+HR

thank you very mutch

livada

newbie

Activity: 417

Merit: 0

Quote from: dragonmike on July 11, 2018, 05:51:31 AM

Out of curiosity, how much juice are you feeding the Vega cores for freqs between 1400 and 1450?
I've got my 64's as follows on CN algos:

GPU_P7=1428;905
Mem_P3=1140;1000

Vega 56 air ref (samsung) 64 bios:
https://image.prntscr.com/image/iiz5MiP9QIeBo8EsJQ2Biw.jpg
Vega 64 Liquid(samsung):
https://image.prntscr.com/image/seepnLTiQtiueahdUVPuWQ.jpg
Vega 56 Nitro+ (hynix) stock bios
https://image.prntscr.com/image/oGXW6yYzQVWOa-QY1sV7Tg.jpg

Quote from: Sonic-X on July 11, 2018, 05:54:19 AM

What are the intensity and worksize settings for you at Vega56(hynix) Nitro +?

Intensity: for all vega 56 card(samsung and hynix) with stock and 64 bios[/b]
Heavy/haven/tube/italo : 56/8/2 - 1550+HR
v7/stl : 112/16/2 or 120/8/2 - 2000+HR
fast : 112/16/2 or 120/8/2 - 3800/3900HR
lite/litev7 : 234/8/2 - 4200HR

vega 64 intensity:
Heavy/haven/tube/italo : 60/8/2 - 1550HR
v7/stl : 120/16:2 - 2100/2200HR
fast : 120/16/2 - 4000+HR

Sonic-X

jr. member

Activity: 69

Merit: 2

Quote from: livada on July 11, 2018, 05:42:58 AM

ok HR is good and this is it. 20/30+- per card.

Now. how much electricity is it?

3*vega56(64bios)(ref air samsung)+1vega64 Liquid+4Fan - form the wall = 700W in hevy

6* vega56 NITRO+(stock bios)(hynix mem)+ 6fan - from the wall= 1000W in heavy and 1020/30W in v7

What are the intensity and worksize settings for you at Vega56(hynix) Nitro +?
thanks.

dragonmike

hero member

Activity: 1274

Merit: 556

Out of curiosity, how much juice are you feeding the Vega cores for freqs between 1400 and 1450?
I've got my 64's as follows on CN algos:

GPU_P7=1428;905
Mem_P3=1140;1000

livada

newbie

Activity: 417

Merit: 0

ok HR is good and this is it. 20/30+- per card.

Now. how much electricity is it?

3*vega56(64bios)(ref air samsung)+1vega64 Liquid+4Fan - form the wall = 700W in hevy
https://image.prntscr.com/image/oQ6zexAxRlCXmEfwWxPVaw.jpg

6* vega56 NITRO+(stock bios)(hynix mem)+ 6fan - from the wall= 1000W in heavy and 1020/30W in v7
https://image.prntscr.com/image/BPSmrdF5QLCO9KiitLpBCw.jpg https://image.prntscr.com/image/zN8gWMLPRsWtV0ENyNYAHw.jpg

treanski

full member

Activity: 364

Merit: 106

ONe Social Network.

Quote from: pbfarmer on July 11, 2018, 05:04:30 AM

Quote from: livada on July 11, 2018, 04:00:37 AM

Quote from: roma__11 on July 10, 2018, 04:33:26 PM

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

My ref AIRs run between 50-55 degrees (fans between 3-3.5K @ room temp / ~70F). 65 - even on air - means you have a major airflow problem, or are running waaaay to much power (or you live in the Sahara.)

i think he is running his vegas without proper undervolting

pbfarmer

member

Activity: 340

Merit: 29

Quote from: livada on July 11, 2018, 04:00:37 AM

Quote from: roma__11 on July 10, 2018, 04:33:26 PM

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50C and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.

My ref AIRs run between 50-55 degrees (fans between 3-3.5K @ room temp / ~70F). 65 - even on air - means you have a major airflow problem, or are running waaaay to much power (or you live in the Sahara.)

livada

newbie

Activity: 417

Merit: 0

Quote from: roma__11 on July 10, 2018, 04:33:26 PM

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

This is too HOT for vega 64 Liquid.
Normal temp for Liquid is 50C.
I have Liquid and temp is 45-50°C(room TEMP 25-30C) with 1100-1600RPM and HR in heavy 1550HR - v7 2100HR - fast 4000+HR.
this is 3*vega 56 with 64bios(ref air), and 1*vega 64 Liquid(gpu2)-700W from the wall (with 4*extra fan and Liquid use 20W+ more than air) and this is in the MID TOWER CASE.
https://image.prntscr.com/image/_tdI8Wy8QSOe5m_tCl1oEQ.jpg

heavyarms1912

full member

Activity: 729

Merit: 114

Quote from: zeef on July 10, 2018, 07:01:41 PM

Can you enumerate some of by MP?
Thanks

if you're context switching avoid quoting the whole post and maybe address it in via pm route. You're hogging up the thread space.

zeef

newbie

Activity: 296

Merit: 0

Quote from: roma__11 on July 10, 2018, 06:25:38 PM

Quote from: zeef on July 10, 2018, 05:37:22 PM

Quote from: roma__11 on July 10, 2018, 04:17:46 PM

Quote from: zeef on July 09, 2018, 08:17:59 AM

Quote from: roma__11 on July 09, 2018, 05:12:34 AM

Quote from: yaya79 on July 09, 2018, 03:51:35 AM

my result vega64 1550/920, 1100/920 heavy algo.
Is it possible to make more than 1700hs?

Driver?

win10-64bit-radeon-software-adrenalin-edition-18.6.1-june13
https://thumb.ibb.co/diHN98/img_2018_07_09_12_10_23.png

what motherboard you use for connecting all the vegas?

Seems a good board, any problem with that?

Gigabyte GA-B250-FinTech

there are nuances but everything is solved ))

Can you enumerate some of by MP?

Thanks

roma__11

newbie

Activity: 115

Merit: 0

Quote from: zeef on July 10, 2018, 05:37:22 PM

Quote from: roma__11 on July 10, 2018, 04:17:46 PM

Quote from: zeef on July 09, 2018, 08:17:59 AM

Quote from: roma__11 on July 09, 2018, 05:12:34 AM

Quote from: yaya79 on July 09, 2018, 03:51:35 AM

my result vega64 1550/920, 1100/920 heavy algo.
Is it possible to make more than 1700hs?

Driver?

win10-64bit-radeon-software-adrenalin-edition-18.6.1-june13
https://thumb.ibb.co/diHN98/img_2018_07_09_12_10_23.png

what motherboard you use for connecting all the vegas?

Seems a good board, any problem with that?

Gigabyte GA-B250-FinTech

there are nuances but everything is solved ))

zeef

newbie

Activity: 296

Merit: 0

Quote from: roma__11 on July 10, 2018, 04:17:46 PM

Quote from: zeef on July 09, 2018, 08:17:59 AM

Quote from: roma__11 on July 09, 2018, 05:12:34 AM

Quote from: yaya79 on July 09, 2018, 03:51:35 AM

my result vega64 1550/920, 1100/920 heavy algo.
Is it possible to make more than 1700hs?

Driver?

win10-64bit-radeon-software-adrenalin-edition-18.6.1-june13
https://thumb.ibb.co/diHN98/img_2018_07_09_12_10_23.png

what motherboard you use for connecting all the vegas?

Seems a good board, any problem with that?

Gigabyte GA-B250-FinTech

roma__11

newbie

Activity: 115

Merit: 0

algo CN-Fast does not work stably when there are more than 6 cards, the adrenaline driver is 18.6.1-june13, there are no power problems, even in excess, other versions are similar, with very low performance, what should I do?
It works from 10 minutes to an hour, it happens, then just reboot ......
Vega64 Liquid
temperature not above 65 memory maximum +10

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 197. (Read 237247 times)