Hi Guys, what hash rate do you have on "heavy" with rx 570 8gb ? my max is 740 ;( on normal algo with claymore i have 880...
Check if your boards are in Compute ModeWhat intensity do you are running?
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 224. (Read 237263 times)
June 12, 2018, 09:26:38 AM
What intensity do you are running?
June 12, 2018, 09:03:59 AM
Calm down, there is a "ignore" link under every nickname, just click that and you are good to go.
June 12, 2018, 08:52:28 AM
Hi Guys, what hash rate do you have on "heavy" with rx 570 8gb ? my max is 740 ;( on normal algo with claymore i have 880...
June 12, 2018, 08:31:27 AM
You need good timing straps to reach 1k+ on CN-V7. 8gb cards can do 1k+ on CN-Heavy easily.
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks). They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall). So it's pretty much possible.
Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.
I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)
RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)
6 x RX580 4gb cards + 1 RX570 8gb (GPU4).
Ok this is very nice but a few questions:
- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?
Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.
Motherboard doesn't matter - cause I use two separate asus z170p and z170a boards and results doesn't change.
I don't overclock in BIOS. I use ODN tool. All states except P7 and P2 are disabled.
Each GPU is different some need 912 mV at 1250 while some are okay with 875-887 mV on core. I usually keep P2-mem 887 or lower.
Notes:
Whenever I set 912mV on core and 887 on mem the actual core voltage hovers in between 887-912. more likely at 900mV.
You need good timing staps else you would require very high OC to cross 1k.
And what parameters (intensity) you use?
SRB miner specificIntensity 59 and dual threads. 8gb card at 116/118.
June 12, 2018, 08:14:14 AM
Question for you guys.
I have a new card a Vega 56 Powercolor red devil. Samsung memory.
When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.
I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.
Any thoughts.
In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?
first try without powertable.I have a new card a Vega 56 Powercolor red devil. Samsung memory.
When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.
I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.
Any thoughts.
In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?
second you sure u use good .reg file and change this:
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4d36e968-e325-11ce-bfc1-08002be10318}\0000]
mybe your card not 0000 mybe is 0001 0002 *
vega 56/64bios - v7 intensity/worksize : 112/16 or 120/8
heavy : 56/8
lite 235/8
for other algo etc arto-aloy see my old post
June 12, 2018, 08:09:51 AM
Question for you guys.
I have a new card a Vega 56 Powercolor red devil. Samsung memory.
When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.
I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.
Any thoughts.
In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?
I have a new card a Vega 56 Powercolor red devil. Samsung memory.
When I try to apply a powerplay table the card becomes "not a valid gpu" in OverDriveNT tool and pulls a error 43 in device manager.
I never came across this before any thoughts, i have applied the power play tables many times never saw this error on other cards.
Any thoughts.
In addition I find that the 120 intensity for vega 56 and 64 in SBR is the best do you agree?
June 12, 2018, 08:01:20 AM
I do not wish to comment further as I dont want to help you, maybe reason that he did not reply to you as you spammed board already many times before.
You wish people to answer your questions then accuse others of spamming. Its ok I not reply any more to gypsy noob. I will wait for the poster my question
was for to answer myself maybe in private but better to help others on forum also to get good hash rate.
You big nob and you only SPAM. You dont help any with answer : WHAT MB YOU HAVE. HOW I INSTAL WINDOWS. WHERE IS MY PRINTER?
This topic i SRBMINER TOPIC. and ask how use SRBMINER not how use windows.
I contact doctor and i have answer. You dont have any. You big noob but You're right smart. but you not smart you gipsy spamer noob.
NO OPTION WORKSIZE for all GPU without gpu_conf. Worsize is always 8.
Mybe in new version add W for all gpu
This is answer gipsy noob...
June 12, 2018, 07:56:02 AM
how i use this for all card without gpu conf?
"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},
]
}
this is not work
"intensity" : 120,
"worksize" : 16,
"double_threads" : true,
W alwys 8 not 16
@DOCTOR ?
What a hyprocrite noob you are!
Answer if you know? i dont know.
You know my di... fck noob
You ask for some much help in forums then complain when others try talk about HashRate.
Gypsy noob
You not answer noob. Answer how use WORKSIZE for all card without gpu conf?
Doctor not answer . you SMART GAY . answer .
I do not wish to comment further as I dont want to help you, maybe reason that he did not reply to you as you spammed board already many times before.
You wish people to answer your questions then accuse others of spamming. Its ok I not reply any more to gypsy noob. I will wait for the poster my question
was for to answer myself maybe in private but better to help others on forum also to get good hash rate.
June 12, 2018, 07:53:54 AM
how i use this for all card without gpu conf?
"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},
]
}
this is not work
"intensity" : 120,
"worksize" : 16,
"double_threads" : true,
W alwys 8 not 16
@DOCTOR ?
What a hyprocrite noob you are!
Answer if you know? i dont know.
You know my di... fck noob
You ask for some much help in forums then complain when others try talk about HashRate.
Gypsy noob
You not answer noob. Answer how use WORKSIZE for all card without gpu conf?
Doctor not answer . you SMART GAY . answer .
ANSWER IS : NO OPTION FOR THIS NOW
Mybe in other version be option worksize for all GPU.
June 12, 2018, 07:51:39 AM
No one is writing much about SRB miner, I asked something related to the topic with such bold claims.
No one ask for your noob input of installing driver and windows...
We discuss hashrates of the miner.. its the authors interest to aid best hash rate to use his miner..
- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
Yo u ask this noob. This is not discussion on HR or minner. this is SPAM
You have other topic etc OVERCLOCK FOR NEWBIES or WHAT MB I BAY etc...
June 12, 2018, 07:46:50 AM
how i use this for all card without gpu conf?
"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},
]
}
this is not work
"intensity" : 120,
"worksize" : 16,
"double_threads" : true,
W alwys 8 not 16
@DOCTOR ?
What a hyprocrite noob you are!
Answer if you know? i dont know.
You know my di... fck noob
June 12, 2018, 07:22:45 AM
Some of these results are not making sense at all.
I have tweaked my Asus RX580 (8GB) according to best guide and not getting over 1000 hash on each.
I dont think its possible unless you having clocked it to have hundreds of memory errors and card then fuck up..
I have tweaked my Asus RX580 (8GB) according to best guide and not getting over 1000 hash on each.
I dont think its possible unless you having clocked it to have hundreds of memory errors and card then fuck up..
So! If you don't know how to do it then it is impossible?
Didnt say its impossible, just saying with the dodgy overlocks your not considering power draw.
Considering the safety of your cards, then good luck with your power bill vs profit of mining.
Good luck with the life of your cards..
Crazy overclock? Nope.
Insane power draw? Nope.
I can reach average 1100H/s in heavy with 1310/2020 (Samsung, 940mv cvddc) with no pain. Well, I did some tests with intensity but was not hard to find the perfect balance (between 56 and 58).
For Micron @heavyarms shared his own timings some pages ago and they are great. Ubermix timings are good for Samsung. So, there are many knowledge around this thread to find best performance.
I'm trying to find a way to break 1000H/s with stability with my Elpida. I had good results with some mixing, but when I reach 1000H/s with low memory clock, the ETHash performance drops even with high clock (it doesn't makes sense).
You did hardcoded bios mod or you using OverDriveNTool?
My bios has customized timings (some of them with tips from here, mixing straps, doing voodoo and dark magic) for my Elpida and Samsung.
OverdriveNTool is a handy tool to disable useless p-states, set clocks/voltages and target temp. I really don't like to set it all in bios.
OFF:
And guys, please don't fight.
Or, if you want to fight too much, please find a place, open a live stream to us and fight to death. I collect the bets
June 12, 2018, 06:55:01 AM
how i use this for all card without gpu conf?
"gpu_conf" :
[
{ "id" : 0, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 1, "intensity" : 120, "worksize" : 16, "threads" : 2},
{ "id" : 2, "intensity" : 120, "worksize" : 16, "threads" : 2},
]
}
this is not work
"intensity" : 120,
"worksize" : 16,
"double_threads" : true,
W alwys 8 not 16
@DOCTOR ?
What a hyprocrite noob you are!
June 12, 2018, 06:39:04 AM
Ok this is very nice but a few questions:
- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?
Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.
you nor ask HOW I INSTAL WINDOWS. STOP SPAM THIS TOPIC go on PP an spam direct him not all...
This is SRB miner topic not how i instal driver...
No one is writing much about SRB miner, I asked something related to the topic with such bold claims.
No one ask for your noob input of installing driver and windows...
We discuss hashrates of the miner.. its the authors interest to aid best hash rate to use his miner..
June 12, 2018, 06:21:17 AM
Ok this is very nice but a few questions:
- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?
Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.
you not ask HOW I INSTAL WINDOWS. STOP SPAM THIS TOPIC go on PP an spam direct him not all...
This is SRB miner topic not how i instal driver...
June 12, 2018, 02:15:06 AM
You need good timing straps to reach 1k+ on CN-V7. 8gb cards can do 1k+ on CN-Heavy easily.
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks). They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall). So it's pretty much possible.
Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.
I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)
RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)
6 x RX580 4gb cards + 1 RX570 8gb (GPU4).
https://i.imgur.com/VQl9Hxz.jpg
Ok this is very nice but a few questions:
- What mother board you use?
- How do you overclock your bios? and what overclocking tool you use?
- To confirm your GPU 1250mhz/900mv Power Memory: 2020mhz /900mv?
Im not jealous of your results but similar cards and spent days tweaking it and cannot break 1000
My memory is Micron and Hynix.
June 12, 2018, 01:17:36 AM
And what parameters (intensity) you use?
June 12, 2018, 12:45:12 AM
You need good timing straps to reach 1k+ on CN-V7. 8gb cards can do 1k+ on CN-Heavy easily.
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks). They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall). So it's pretty much possible.
Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.
I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)
RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)
6 x RX580 4gb cards + 1 RX570 8gb (GPU4).
https://i.imgur.com/VQl9Hxz.jpg
Hi heavyarms!
Can you share your timing straps please?
Thank you in advance
June 11, 2018, 08:22:53 PM
You need good timing straps to reach 1k+ on CN-V7. 8gb cards can do 1k+ on CN-Heavy easily.
I have also got 1260 H/s on an RX 570 8gb card (1466/2300 clocks). They do 1140 H/s @ 1250/2240 clocks and 900mV core (105w from wall). So it's pretty much possible.
Also, All 4gb cards that I have Elpida, Hynix do 1k+ on CN-V7.
I want to see that...
Can't get more that 700h/s with Elpida 570 pulse 4gb (with stak and SRB)
RX570 8gb 1260 H/s on CN-Heavy (i posted this some pages back)
6 x RX580 4gb cards + 1 RX570 8gb (GPU4).
June 11, 2018, 08:03:13 PM
What is this?
https://image.prntscr.com/image/EomGSxQKREKg0w97UYvkYQ.jpg
0HR 5 sec and go back and mining work ok.
https://image.prntscr.com/image/EomGSxQKREKg0w97UYvkYQ.jpg
0HR 5 sec and go back and mining work ok.
I have the same issue on 1.6.0
[2018-06-11 21:39:36] stats: Mining time: 0 days, 2 hours, 27 minutes, 9 seconds
[2018-06-11 21:39:36] stats: Algo: normalv7
[2018-06-11 21:39:36] stats: Pool: pool.electroneum.hashvault.pro:5555
[2018-06-11 21:39:36] stats: Connected since: 2018-06-11 19:12:27
[2018-06-11 21:39:36] stats: Last job received : 441 seconds ago
[2018-06-11 21:39:36] stats: System shutdown temperature: 80
[2018-06-11 21:39:36] stats: Accepted/Total shares: 225/225
[2018-06-11 21:39:36] stats: Average time to find share: 39 seconds
[2018-06-11 21:39:36] stats: HW error: BUS_ID_5: 16
[2018-06-11 21:39:36] stats: HW error: BUS_ID_13: 12
[2018-06-11 21:39:36] stats: HW error: BUS_ID_2: 10
[2018-06-11 21:39:36] stats: HW error: BUS_ID_1: 9
[2018-06-11 21:39:36] stats: HW error: BUS_ID_15: 10
[2018-06-11 21:39:36] stats: HW error: BUS_ID_12: 14
[2018-06-11 21:39:36] stats: HW error: BUS_ID_3: 9
[2018-06-11 21:39:36] stats: HW error: BUS_ID_10: 7
[2018-06-11 21:39:36] stats: HW error: BUS_ID_11: 13
[2018-06-11 21:39:36] stats: HW error: BUS_ID_9: 6
[2018-06-11 21:39:36] stats: HW error: BUS_ID_4: 4
[2018-06-11 21:39:36] stats: HW error: BUS_ID_14: 10
[2018-06-11 21:39:36] stats: HW error: BUS_ID_6: 8
Full log with this problem
http://pasted.co/ea87db25
Want to pay attention! Problem not in HW error but in that miner work but pool not accepted any result. You can see this in log file. I have another 2 log files if needed. I think whatch dog can see this if miner more time don't have accepted result.
Now this problem reproduced on miner version 1.5.5.1 another farm. On the same pool pool.electroneum.hashvault.pro may be this problem of pool or coin network.
UPDATE: now i see in log message
[2018-06-12 04:00:39] Job timeout detected, reconnecting to pool..
after this work restored
Full log if needit http://pasted.co/431f386d
Jump to: