SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 48.

chimaeraa

newbie

Activity: 49

Merit: 0

hi doc.
do you know i love you ?!!!! Shocked

Quote

[2019-03-20 11:30:00] Startup monitor attached
[2019-03-20 11:30:00] Miner version: 1.8.1
[2019-03-20 11:30:00] Windows version: 10.0 build 17763
[2019-03-20 11:30:00] Video driver version: 25.20.15027.5007
[2019-03-20 11:30:07] AMD Platform ID: 0
[2019-03-20 11:30:07] AMD platform FOUND

i did install Radeon Adrenalin-19.3.2 and use your last srbminer . it's lock beautiful Shocked

it's about 12H and nothing happen but F*** XMR always got crash not impotent .

whit ODNTools 0.2.8 and new driver you don't need anything else . no power tabel no reg edit no ..... just set in ODNTools and rich best P/H -

( i rich 2300 H/S in Vega 64 Air XMR whit G 1650-v950 and M1300-v950) but i don't push it hard ,maybe it rich 2600 H/S !!!!!!!!!!!!!!!!!? Huh

?

also you can use amd wattman whit lot of access in every part of your gpu hardware whit lot of api to control it....!!! i think you like it . try it.

thank you lot.

also i have on Q. when i did config my rige i connect and DC from pool . every time in same Block high i get different job to do. i find some job is easy , hard or endless loop. can you add some option to miner if last shear time find or AVG time more than x Sec just get new job from pool???
( i find 3 block in 5 min when config my rige in solo mining)

nars28

newbie

Activity: 25

Merit: 0

I'm having crashes with 1.8.1 too on V4. Last time it was bulletproof on V8.

Art Gar

newbie

Activity: 22

Merit: 0

Quote from: UnclWish on March 20, 2019, 04:23:25 AM

Quote from: Art Gar on March 20, 2019, 01:07:09 AM

Quote from: UnclWish on March 20, 2019, 01:03:05 AM

Quote from: Art Gar on March 19, 2019, 11:19:26 PM

Quote from: UnclWish on March 19, 2019, 10:23:47 AM

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy

https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

Sorry, f4 exists. Need f1 and f2.

+f2

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Art Gar on March 20, 2019, 01:07:09 AM

Quote from: UnclWish on March 20, 2019, 01:03:05 AM

Quote from: Art Gar on March 19, 2019, 11:19:26 PM

Quote from: UnclWish on March 19, 2019, 10:23:47 AM

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy

https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

Sorry, f4 exists. Need f1 and f2.

RuMiner

member

Activity: 168

Merit: 15

confirm. having crashes every 6-9 hours on CNv4

clancy182

newbie

Activity: 21

Merit: 0

hi,

i still have crash after 24 hours of using with 1.8.1
its better than 1.8.0 (crash after 4-6 hours)
no crash before.

GPU0: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 9]
GPU1: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 12]
GPU2: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 6]
GPU3: Radeon RX Vega [gfx900] [8176 MB][I: 112.0][W: 16][T: 2][F: 4][BUS: 3]
-----------------------------------------------------------------------------
SRBMiner Cryptonight AMD GPU miner 1.8.1
DevFee ~0.85%
Press 's' to display stats
Press 'h' to display hashrate
Press 'r' to reload pools
Press 'p' to switch to the next pool
Press 'o' to switch to the previous pool
Press 0-9 to disable/enable GPU while mining
-----------------------------------------------------------------------------
Algorithm : Cryptonight V4 (R)
Algo switching : disabled
Startup monitor : enabled
Gpu watchdog : enabled [normal mode]
Coin forking : disabled

Art Gar

newbie

Activity: 22

Merit: 0

Quote from: UnclWish on March 20, 2019, 01:03:05 AM

Quote from: Art Gar on March 19, 2019, 11:19:26 PM

Quote from: UnclWish on March 19, 2019, 10:23:47 AM

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy

https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 4?

+f1

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: Art Gar on March 19, 2019, 11:19:26 PM

Quote from: UnclWish on March 19, 2019, 10:23:47 AM

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy

https://yadi.sk/d/AJvgBJ6Aa0r1pw

Thanks! I'll try it! Can you make the same with fragments 1 and 2?

Art Gar

newbie

Activity: 22

Merit: 0

Quote from: UnclWish on March 19, 2019, 10:23:47 AM

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

Enjoy

https://yadi.sk/d/AJvgBJ6Aa0r1pw

abg00

jr. member

Activity: 288

Merit: 1

hi Dok

test old card with xcash 1.8.1
r7(9) 2gb card

i=0=18 rate 192
i=27 rate 234

plz correst auto intens

UnclWish

sr. member

Activity: 1484

Merit: 253

Can anyone share with me kernel files compiled on 18.6.1 Windows 10 driver for cnr RX 580 8Gb card?
Kernel files is on "cache" folder inside miner folder.

chimaeraa

newbie

Activity: 49

Merit: 0

Quote from: doktor83 on March 19, 2019, 03:05:13 AM

Quote from: chimaeraa on March 19, 2019, 01:47:16 AM

hi doc.
i got this before stop again.

Quote

[2019-03-19 06:35:04] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"384626154776718","job_id":"379878018372315","nonce":"63d96f57","result":"30663415f3114aa9e8a801cf612f83ebc252d60e3ccdc77a37a82791bb190000"}}
[2019-03-19 06:35:04] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-19 06:35:04] miner_result: Pool accepted result 0x000019BB for job[143] [171ms]
[2019-03-19 06:35:28] DevFee pool NOT SET!
[2019-03-19 06:35:28] DevFee pool NOT SET!

i use V 1.8.0.

Miner won't stop if devfee pool can't be set/connected ONCE, it will do something only after few hours of trying.
Also why still using 1.8.0 ?

i don't know why half of my gpu not working and get 0 hash. i think it's about gpu driver.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: chimaeraa on March 19, 2019, 01:47:16 AM

hi doc.
i got this before stop again.

Quote

[2019-03-19 06:35:04] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"384626154776718","job_id":"379878018372315","nonce":"63d96f57","result":"30663415f3114aa9e8a801cf612f83ebc252d60e3ccdc77a37a82791bb190000"}}
[2019-03-19 06:35:04] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-19 06:35:04] miner_result: Pool accepted result 0x000019BB for job[143] [171ms]
[2019-03-19 06:35:28] DevFee pool NOT SET!
[2019-03-19 06:35:28] DevFee pool NOT SET!

i use V 1.8.0.

Miner won't stop if devfee pool can't be set/connected ONCE, it will do something only after few hours of trying.
Also why still using 1.8.0 ?

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: UnclWish on March 19, 2019, 12:53:12 AM

Quote from: doktor83 on March 18, 2019, 03:16:51 PM

Quote from: RuMiner on March 18, 2019, 03:12:40 PM

anybody tuned intensity param for CNv4 on Vegas?

112 for vega56, 123 for vega64, also try playing with the thread delay parameter

doctor, I have 2 RX 588. On 1st all right, but on 2nd speed max can i get on SRB miner is 1001-1002 h/s on cnr. But on TeamRed miner on this card i have 1045 h/s. Tried different intensities, tried to change thread delay, but can't increase max speed. Windows 10, Drivers is last 19.3.2.

Yes you wrote this already, how can i help you ?

You are in this a long time ago, you know same cards with same straps & settings won't always give same hashrate..

Someone told me that if he compiles the kernel on 18.6.1 and uses it on 19.2.3, he got better hashrate. Maybe try that.

chimaeraa

newbie

Activity: 49

Merit: 0

hi doc.
i got this before stop again.

Quote

[2019-03-19 06:35:04] json_send[200]: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"384626154776718","job_id":"379878018372315","nonce":"63d96f57","result":"30663415f3114aa9e8a801cf612f83ebc252d60e3ccdc77a37a82791bb190000"}}
[2019-03-19 06:35:04] json_receive[62]: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-03-19 06:35:04] miner_result: Pool accepted result 0x000019BB for job[143] [171ms]
[2019-03-19 06:35:28] DevFee pool NOT SET!
[2019-03-19 06:35:28] DevFee pool NOT SET!

i use V 1.8.0.

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: doktor83 on March 18, 2019, 03:16:51 PM

Quote from: RuMiner on March 18, 2019, 03:12:40 PM

anybody tuned intensity param for CNv4 on Vegas?

112 for vega56, 123 for vega64, also try playing with the thread delay parameter

doctor, I have 2 RX 588. On 1st all right, but on 2nd speed max can i get on SRB miner is 1001-1002 h/s on cnr. But on TeamRed miner on this card i have 1045 h/s. Tried different intensities, tried to change thread delay, but can't increase max speed. Windows 10, Drivers is last 19.3.2.

ntshb

newbie

Activity: 95

Merit: 0

what intensity should I set?
vega 64

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: RuMiner on March 18, 2019, 03:12:40 PM

anybody tuned intensity param for CNv4 on Vegas?

112 for vega56, 123 for vega64, also try playing with the thread delay parameter

RuMiner

member

Activity: 168

Merit: 15

anybody tuned intensity param for CNv4 on Vegas?

UnclWish

sr. member

Activity: 1484

Merit: 253

Quote from: eduardooaz on March 18, 2019, 02:11:23 PM

Sup guys.

Long time i dont mine cryptonight, i used SRB to mine heavy algo good time ago and stoped.
Now i am gonna help a friend of myne to mine Monero with SRB miner, monero uses V4 right?
Can some1 tell me what is the intensity that is normaly used in a RX 580 in v4?

If 8Gb card - try this variants - 71, 72, 90, 104, 108, 112, 116, 118

Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 48. (Read 237247 times)