I saw the presentation of AMD 7.
Dok, any ideea about the impact of enhanced characteristics will have on mining?
Peak engine clocks weigh in at 1,800 MHz and offers 25% more performance than Vega 64 at the same power.
7nm
Technology Process
3840
Stream Processors
16 GB
Memory
1 TB/s
Memory Bandwidth
https://www.tomshardware.com/news/amd-radeon-vii-7nm-gpu-specs,38400.html
Topic: SRBMiner Cryptonight AMD GPU Miner V1.9.3 - native algo switching - page 72. (Read 237261 times)
January 09, 2019, 02:22:22 PM
January 09, 2019, 02:03:06 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
on srb 1.7.4 webchain work beter i try and i have 200 hr more per card on srb miner and work fine 5 day without any error
EDIT
i try now 1.7.6 and webchain have Extra HR- +100 hr per card again.
http://imgbox.com/BwiQP7L6
LOUD miner sucks with webchain...
Please do not compare the local hashrate and hashrate on the pool. SRB miner shows more, but pool hashrate is 2 times lower than LOUD miner. Check again, please.
And show screenshot of the pool, not a local hashrate of your rig.
I really want to believe that a respected SRB-developer will fix his miner's flaws and we will see a good hashrate on the pool too. Good luck.
January 08, 2019, 03:17:17 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
on srb 1.7.4 webchain work beter i try and i have 200 hr more per card on srb miner and work fine 5 day without any error
EDIT
i try now 1.7.6 and webchain have Extra HR- +100 hr per card again.
http://imgbox.com/BwiQP7L6
LOUD miner sucks with webchain...
January 08, 2019, 01:31:42 PM
hi dok...with last version i tried today the new turtle algo
but after around 30 minutes with low intensity and after 5 minutes with higher intensity (the one the miner choose itself (Vega = intensity 160)
[2019-01-08 19:08:35] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"696945206327582","job_id":"625186504747411","nonce":"c2fa56d5","result":"a15e519e97e708bd3387cdb9c88d1f48a4b4d1c6c8967cf8628b5caf981d0000"}}
[2019-01-08 19:08:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-01-08 19:08:35] miner_result: Pool accepted result 0x00001D98 [31ms]
[2019-01-08 19:08:37] watchdog: GPU0 [BUS: 6] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU1 [BUS: 10] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU2 [BUS: 3] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU3 [BUS: 18] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU4 [BUS: 15] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU5 [BUS: 24] hashing speed is 0 H/S
all gpu´s DEAD together?
i see that the algo need 20W more power per card - is this algo that hard that i see that all cards are to much OC/UV?
every other algo runs for hours
but after around 30 minutes with low intensity and after 5 minutes with higher intensity (the one the miner choose itself (Vega = intensity 160)
[2019-01-08 19:08:35] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"696945206327582","job_id":"625186504747411","nonce":"c2fa56d5","result":"a15e519e97e708bd3387cdb9c88d1f48a4b4d1c6c8967cf8628b5caf981d0000"}}
[2019-01-08 19:08:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-01-08 19:08:35] miner_result: Pool accepted result 0x00001D98 [31ms]
[2019-01-08 19:08:37] watchdog: GPU0 [BUS: 6] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU1 [BUS: 10] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU2 [BUS: 3] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU3 [BUS: 18] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU4 [BUS: 15] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU5 [BUS: 24] hashing speed is 0 H/S
all gpu´s DEAD together?
i see that the algo need 20W more power per card - is this algo that hard that i see that all cards are to much OC/UV?
every other algo runs for hours
it was probably a driver crash, thats when all cards stop hashing at the same time. I know theres no problem with the algo on vegas because lot of users using it.
Play with the OC settings maybe
hmmm...dont get any compute error messages or something like that i got in past, when something is´nt ok with the cards. also hhinfo showing cards in low p-state if driver crashed...but the cards mhz is in P7 state
i only see this when i use to high intensity...but the miner set 160 itself...
now setting worksize to 8 (instead 16) and is stable
January 08, 2019, 01:17:27 PM
hi dok...with last version i tried today the new turtle algo
but after around 30 minutes with low intensity and after 5 minutes with higher intensity (the one the miner choose itself (Vega = intensity 160)
[2019-01-08 19:08:35] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"696945206327582","job_id":"625186504747411","nonce":"c2fa56d5","result":"a15e519e97e708bd3387cdb9c88d1f48a4b4d1c6c8967cf8628b5caf981d0000"}}
[2019-01-08 19:08:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-01-08 19:08:35] miner_result: Pool accepted result 0x00001D98 [31ms]
[2019-01-08 19:08:37] watchdog: GPU0 [BUS: 6] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU1 [BUS: 10] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU2 [BUS: 3] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU3 [BUS: 18] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU4 [BUS: 15] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU5 [BUS: 24] hashing speed is 0 H/S
all gpu´s DEAD together?
i see that the algo need 20W more power per card - is this algo that hard that i see that all cards are to much OC/UV?
every other algo runs for hours
but after around 30 minutes with low intensity and after 5 minutes with higher intensity (the one the miner choose itself (Vega = intensity 160)
[2019-01-08 19:08:35] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"696945206327582","job_id":"625186504747411","nonce":"c2fa56d5","result":"a15e519e97e708bd3387cdb9c88d1f48a4b4d1c6c8967cf8628b5caf981d0000"}}
[2019-01-08 19:08:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-01-08 19:08:35] miner_result: Pool accepted result 0x00001D98 [31ms]
[2019-01-08 19:08:37] watchdog: GPU0 [BUS: 6] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU1 [BUS: 10] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU2 [BUS: 3] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU3 [BUS: 18] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU4 [BUS: 15] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU5 [BUS: 24] hashing speed is 0 H/S
all gpu´s DEAD together?
i see that the algo need 20W more power per card - is this algo that hard that i see that all cards are to much OC/UV?
every other algo runs for hours
it was probably a driver crash, thats when all cards stop hashing at the same time. I know theres no problem with the algo on vegas because lot of users using it.
Play with the OC settings maybe
January 08, 2019, 01:12:23 PM
hi dok...with last version i tried today the new turtle algo
but after around 30 minutes with low intensity and after 5 minutes with higher intensity (the one the miner choose itself (Vega = intensity 160)
[2019-01-08 19:08:35] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"696945206327582","job_id":"625186504747411","nonce":"c2fa56d5","result":"a15e519e97e708bd3387cdb9c88d1f48a4b4d1c6c8967cf8628b5caf981d0000"}}
[2019-01-08 19:08:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-01-08 19:08:35] miner_result: Pool accepted result 0x00001D98 [31ms]
[2019-01-08 19:08:37] watchdog: GPU0 [BUS: 6] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU1 [BUS: 10] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU2 [BUS: 3] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU3 [BUS: 18] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU4 [BUS: 15] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU5 [BUS: 24] hashing speed is 0 H/S
all gpu´s DEAD together?
i see that the algo need 20W more power per card - is this algo that hard that i see that all cards are to much OC/UV?
every other algo runs for hours
but after around 30 minutes with low intensity and after 5 minutes with higher intensity (the one the miner choose itself (Vega = intensity 160)
[2019-01-08 19:08:35] json_send: {"id":1,"jsonrpc": "2.0","method":"submit","params":{"id":"696945206327582","job_id":"625186504747411","nonce":"c2fa56d5","result":"a15e519e97e708bd3387cdb9c88d1f48a4b4d1c6c8967cf8628b5caf981d0000"}}
[2019-01-08 19:08:35] json_receive: {"id":1,"jsonrpc":"2.0","error":null,"result":{"status":"OK"}}
[2019-01-08 19:08:35] miner_result: Pool accepted result 0x00001D98 [31ms]
[2019-01-08 19:08:37] watchdog: GPU0 [BUS: 6] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU1 [BUS: 10] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU2 [BUS: 3] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU3 [BUS: 18] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU4 [BUS: 15] hashing speed is 0 H/S
[2019-01-08 19:08:37] watchdog: GPU5 [BUS: 24] hashing speed is 0 H/S
all gpu´s DEAD together?
i see that the algo need 20W more power per card - is this algo that hard that i see that all cards are to much OC/UV?
every other algo runs for hours
January 08, 2019, 01:06:51 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
No, i won't do anything with Webchain anymore.
Please use the allmighty LOUD miner (xmrrig fork) instead.
Thank you for your concern. Due to your inaction, webchain difficulty does not rise and it is more profitable for several months, unlike other Cryptonight algorithms.
I hope in the next updates you will remove the webchain algorithm from SRB.
I hope you stop writing here and find yourself something more useful to do.
January 08, 2019, 01:00:57 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
No, i won't do anything with Webchain anymore.
Please use the allmighty LOUD miner (xmrrig fork) instead.
Thank you for your concern. Due to your inaction, webchain difficulty does not rise and it is more profitable for several months, unlike other Cryptonight algorithms.
I hope in the next updates you will remove the webchain algorithm from SRB.
January 08, 2019, 05:07:05 AM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
No, i won't do anything with Webchain anymore.
Please use the allmighty LOUD miner (xmrrig fork) instead.
January 08, 2019, 04:57:16 AM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
LOUD Miner working fine with only webchain algo. I hope SRB fix bugs with webchain and do better.
January 08, 2019, 01:02:54 AM
does anyone get some better hashes on haven algo with the new V1.7.6 ?
there should be a small increase on heavy algos on vegas in 176, yes
January 07, 2019, 08:24:10 PM
I know Beam (MimbleWimble) isn't CryptoKnight but I hope SRBMiner can support this algo ASAP.
January 07, 2019, 05:58:03 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
January 07, 2019, 05:45:16 PM
does anyone get some better hashes on haven algo with the new V1.7.6 ?
vega64 = ~2000hr
srb 1.7.6
amd 18.6.1
win 10 x64 1803
int/work/thr 62/8/2
p6-p7 1490/900
p3 1100/900
samsung
~167watts
9 mixed vega rig. gpu 2,3,8 - 56 ref@64bios. other - 64 ref. consumption ~1560watts
you lucky one with vegas
I have 470/570 cards, most of them with 4GB, not 8GB
January 07, 2019, 05:30:28 PM
does anyone get some better hashes on haven algo with the new V1.7.6 ?
vega64 = ~2000hr
srb 1.7.6
amd 18.6.1
win 10 x64 1803
int/work/thr 62/8/2
p6-p7 1490/900
p3 1100/900
samsung
~167watts
9 mixed vega rig. gpu 2,3,8 - 56 ref@64bios. other - 64 ref. consumption ~1560watts
https://i.ibb.co/h9rzDyK/haven.jpg
January 07, 2019, 05:22:47 PM
does anyone get some better hashes on haven algo with the new V1.7.6 ?
January 07, 2019, 02:19:58 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec LIVADA
Where is topic when I say LOUD miner is best miner,I dont know what you talking about.
January 07, 2019, 02:14:59 PM
Hello everybody,can someone explain how to start LOUD miner,what problem is ,when start miner after 1 second miner shutdown ?
yesterday you say LOUD miner is best and not use srb miner. today you say LOUD miner down after 1 sec
BEST miner dead in 1 sec?
open topic for best miner and go out and ask DEV LOUD miner why miner work BEST 1 sec
. This is srb miner topic or go in Tetris topic and ask him- tetris is best game ever and you ask why yuour best miner ever work best only 1 sec January 07, 2019, 12:40:24 PM
I was having a discussion on discord. So I am copying n pasting a portion of what I wrote below. Would it be possible for this ability to get added to SRBminer? Dies it already exsist and I dont know how to do it?
I just wish srb provided more info per card. I used to use claymore and that would tell me what card had how many accepted and stale/rejected shares. Srb groups the cards into 1 result
when srb submits a share, I dont know which card submitted the share. I miss that ability to see how each card was performing
srb makes tuning tough cause even though I see a collective result, who is to say 1 card is submitting twice the shares and another card is only submitting half the shares. It would be nice to see what each card is actually submitting so I can better tune them.
I just wish srb provided more info per card. I used to use claymore and that would tell me what card had how many accepted and stale/rejected shares. Srb groups the cards into 1 result
when srb submits a share, I dont know which card submitted the share. I miss that ability to see how each card was performing
srb makes tuning tough cause even though I see a collective result, who is to say 1 card is submitting twice the shares and another card is only submitting half the shares. It would be nice to see what each card is actually submitting so I can better tune them.
January 07, 2019, 11:15:53 AM
wrong tread,but cant find tread for that miner I wanna try to mine webchai, i have config.json file,roll back my driver to 23.august.2017 blockchain driver,but no have luck
Jump to: