Pages:
Author

Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 32. (Read 44750 times)

legendary
Activity: 3444
Merit: 1061
V0.7.5
+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)

what's the hashrate for fiji and hawaii?

got some on the grave yard  Cheesy

Give it try and you will see  Cheesy

My R9 380x push 41mh out on ERG.

V0.7.5
+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)

Hi Doktor,
Example for ERG+ZIL on Rustpool.xyz? It doesn´t work at the moment. Rustpool give more zil than every other pool, so i want to stay on this pool. With nanominer it is no problem, but i prefer your miner.

~40mh for 480, if 380x = rx 480 might be 40mh for 280x too.. will play with my spares.
hero member
Activity: 2548
Merit: 626
Hi Doktor,
Example for ERG+ZIL on Rustpool.xyz? It doesn´t work at the moment. Rustpool give more zil than every other pool, so i want to stay on this pool. With nanominer it is no problem, but i prefer your miner.

Something like :

Code:
SRBMiner-MULTI.exe --disable-cpu --multi-algorithm-job-mode 3 --a0-is-zil --algorithm ethash;autolykos2 --pool eu-zil.rustpool.xyz:8008;ergo.herominers.com:10250 --wallet eth-wallet-here;ergo-wallet-here --password [email protected]:4444@4G;ergo-worker --worker zil-worker;ergo-worker
member
Activity: 1558
Merit: 69
V0.7.5
+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)

what's the hashrate for fiji and hawaii?

got some on the grave yard  Cheesy

Give it try and you will see  Cheesy

My R9 380x push 41mh out on ERG.

V0.7.5
+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)

Hi Doktor,
Example for ERG+ZIL on Rustpool.xyz? It doesn´t work at the moment. Rustpool give more zil than every other pool, so i want to stay on this pool. With nanominer it is no problem, but i prefer your miner.
legendary
Activity: 3444
Merit: 1061
V0.7.5
+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)

what's the hashrate for fiji and hawaii?

got some on the grave yard  Cheesy
hero member
Activity: 2548
Merit: 626
V0.7.5
+ Fixed hashrate for 'autolykos2' algorithm on RDNA and RDNA2 GPU's that broke on previous version (0.7.4)
+ Fixed 'autolykos2' algorithm for Tonga, Fiji and Hawaii GPU's that broke on previous version (0.7.4)
hero member
Activity: 2548
Merit: 626
it will work.

how to off card on overheat and on again?
only--gpu-off-temperature available? low intens not available?


no intensity lowering
hero member
Activity: 2548
Merit: 626
Hi. Can you look at an issue where the power consumption is not stable and there are random power peaks. When it’s stable, the rig can run around 280W, and sometimes it raise to 380W for few minutes or seconds, and each cards go from 70W to 95-100W… Hashrate always stays stable. I mine on HiveOS

It's not an issues, it is how autolykos2 algorithm works.
hero member
Activity: 2548
Merit: 626
V0.7.4

+ Dataset creation for 'autolykos2' algorithm faster
+ Small improvements on 'autolykos2' algorithm & lower power consumption on Windows OS
+ Small improvements on 'ethash' algorithm
+ Small improvements on 'etchash' algorithm
+ --gpu-tweak-profile and --gpu-boost should now work with latest AMD drivers
+ Added parameter '--gpu-buffer-mode', can be used with ZIL dual mining (check Help\Other\Dual-mining-ZIL.txt)
+ Added '--gpu-ethash-mode 3' for older cards, no DAG is created on Ethash, Etchash (use it if you feel really lucky)
+ Changed the way how 'ignored jobs' are displayed. If you want to see 'ignored job' messages, you need to enable extended logging
+ More bug fixes with ZIL 'dual' mining
+ Minor bug fixes
newbie
Activity: 15
Merit: 2
Hi. Can you look at an issue where the power consumption is not stable and there are random power peaks. When it’s stable, the rig can run around 280W, and sometimes it raise to 380W for few minutes or seconds, and each cards go from 70W to 95-100W… Hashrate always stays stable. I mine on HiveOS
jr. member
Activity: 288
Merit: 1
it will work.

how to off card on overheat and on again?
only--gpu-off-temperature available? low intens not available?
full member
Activity: 1209
Merit: 209
0.7.3 verthash not working on Win7 & 2GB GPU (7850, R9 270). Error -5 [clEnqueueNDRangeKernel [ 0]
On Win 10 work fine

You probably need more virtual mem on win7
65000 MB. 2 GPUs. Not working
hero member
Activity: 2548
Merit: 626
Hello, does anyone having issues mining autolykos with rx5500xt ? i am getting not opencl device found but running list gpu devices the card is there. I have the latest amd whql driver 21.4.1 and i am running windows.
It is strange because in the past i was mining autolykos with srbminer 0.6.9 but with older adrenalin drivers and it was working fine. Now with 0.7.3 i don't know what is the issue.

The latest drivers are the issue. Revert to older and it will work.
newbie
Activity: 25
Merit: 0
Hello, does anyone having issues mining autolykos with rx5500xt ? i am getting not opencl device found but running list gpu devices the card is there. I have the latest amd whql driver 21.4.1 and i am running windows.
It is strange because in the past i was mining autolykos with srbminer 0.6.9 but with older adrenalin drivers and it was working fine. Now with 0.7.3 i don't know what is the issue.
hero member
Activity: 2548
Merit: 626
I have 4 gpu .. I have to write the command line... In the start.bat file need to disable GPU 1 and GPU 2. The GP3 and GPU 4 must work.
Please help... Can you give me the command line example?
how should i write it?


Can anyone help me? please

to enable mining gpu 1 and 2 ... is this command line correct? if wrong ... can anyone write the correct one here??
SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --pool ergo.herominers.com:10250 --wallet 1234567890xxxxxxxxxxxxxxxxxxxx --password yyyyy --gpu 3,4
pause



Lot of examples included with miner, but here you go:

Code:
SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --gpu-id 1!2 --pool ergo.herominers.com:10250 --wallet 1234567890xxxxxxxxxxxxxxxxxxxx --password yyyyy
hero member
Activity: 2548
Merit: 626
0.7.3 verthash not working on Win7 & 2GB GPU (7850, R9 270). Error -5 [clEnqueueNDRangeKernel [ 0]
On Win 10 work fine

You probably need more virtual mem on win7
newbie
Activity: 22
Merit: 0
I have 4 gpu .. I have to write the command line... In the start.bat file need to disable GPU 1 and GPU 2. The GP3 and GPU 4 must work.
Please help... Can you give me the command line example?
how should i write it?


Can anyone help me? please

to enable mining gpu 1 and 2 ... is this command line correct? if wrong ... can anyone write the correct one here??
SRBMiner-MULTI.exe --disable-cpu --algorithm autolykos2 --pool ergo.herominers.com:10250 --wallet 1234567890xxxxxxxxxxxxxxxxxxxx --password yyyyy --gpu 3,4
pause

full member
Activity: 1209
Merit: 209
0.7.3 verthash not working on Win7 & 2GB GPU (7850, R9 270). Error -5 [clEnqueueNDRangeKernel [ 0]
On Win 10 work fine
newbie
Activity: 1
Merit: 0
Hello
I also tested SRBMiner Multi 0-7-3 on nanopool to mine ergo.
What I don't understand is why the mh is not constant?
And that would be mh correct with which I mine from these pictures.
I tested with rx 470 4gb .
2 pictures - i.imgur.com/ol0YLd0.png  / i.imgur.com/Ce7zXwT.png
SRBMiner-MULTI.exe  --disable-cpu --algorithm autolykos2 --pool ergo-eu1.nanopool.org:11111 --wallet -xxxxxxxxxxxxxxxxxxxxxx/worker1 --gpu-boost 50
pause
member
Activity: 1558
Merit: 69
April 27, 2021, 07:23:57 AM

It's working , but p2p is not supported. Try miningpoolhub, hashalot, suprnova or zergpool, it works. Also you dont need to copy verthash.dat to cache folder, it will be created super fast.

Your example SRBMiner-MULTI.exe -disable-gpu --algorithm verthash --pool hub.miningpoolhub.com:20534 --worker xh0st.1 --password x is not valid because you did not provide --wallet parameter. Guess you wanted --wallet xh0st.1, and not --worker xh0st.1

You have an example for ERG+ZIL with rustpool.xyz? I can´t connect to rustpool at the moment
newbie
Activity: 123
Merit: 0
April 26, 2021, 04:34:56 PM
hi i was using the new worked great but now all i get is no internet plug it in , even though my firewall doesnt block it and this version feels sluggish but the same is happening when i try old version the same bat file that worked before is ok so its the program. whats going on was a lot quicker and better before.

and why now has it got a unwansom virus attached to it , im getting sick of githubs virus files , and please dont say it isnt a virus it is lets no go down the im stupid route cuz thats just annoying , github now stands for hack peoples computers to steal crypto lol so watch out everyone.
Pages:
Jump to: