What --gpu-intensity value you suggest?
edit:
All problems resolved with version 0.6.9
Topic: SRBMiner-MULTI GPU & CPU Miner 0.9.4 - page 36. (Read 45593 times)
No, I did not set any extra parameters except --disable-cpu
I left rigs without restarting miners for more than 24h, and on some rigs hashrate got back where it was(at the same time, on two different internet providers), and on other rigs where hashrate was normal - hashrate got lower at the same time as on rigs where hashrate went up(also some rigs are on one ISP, some on other)
What --gpu-intensity value you suggest?
edit:
All problems resolved with version 0.6.9
What --gpu-intensity value you suggest?
edit:
All problems resolved with version 0.6.9
Hello Doktore 
I have problem with autolykos2
Why hashrate ramdomly drops, sometimes it works almost whole day, sometimes just few hours/minutes than drop(form
~55mhs to ~50mhs on RX470 4g), than I restart , and all normal.., and after sometime all same....restart....
Sometimes hashrate drops on all rigs at same time, sometimes there is difference in few hours before it drop on all rigs.
Other than this all cards are stable. Your miner is better than nanominer. On nanominer there is no drop, but speed is same as srbminer when hashrate drops
Hashrate drop is confirmed on pool
Also power consumption is lower on your miner
I use hiveos. I tried 0.6.8 and same.
I have problem with autolykos2
Why hashrate ramdomly drops, sometimes it works almost whole day, sometimes just few hours/minutes than drop(form
~55mhs to ~50mhs on RX470 4g), than I restart , and all normal.., and after sometime all same....restart....
Sometimes hashrate drops on all rigs at same time, sometimes there is difference in few hours before it drop on all rigs.
Other than this all cards are stable. Your miner is better than nanominer. On nanominer there is no drop, but speed is same as srbminer when hashrate drops
Hashrate drop is confirmed on pool
Also power consumption is lower on your miner
I use hiveos. I tried 0.6.8 and same.
and have you tried manually setting the --gpu-intensity parameter to a lower value ?
Hello Doktore
I have problem with autolykos2
Why hashrate ramdomly drops, sometimes it works almost whole day, sometimes just few hours/minutes than drop(form
~55mhs to ~50mhs on RX470 4g), than I restart , and all normal.., and after sometime all same....restart....
Sometimes hashrate drops on all rigs at same time, sometimes there is difference in few hours before it drop on all rigs.
Other than this all cards are stable. Your miner is better than nanominer. On nanominer there is no drop, but speed is same as srbminer when hashrate drops
Hashrate drop is confirmed on pool
Also power consumption is lower on your miner
I use hiveos. I tried 0.6.8 and same.
I have problem with autolykos2
Why hashrate ramdomly drops, sometimes it works almost whole day, sometimes just few hours/minutes than drop(form
~55mhs to ~50mhs on RX470 4g), than I restart , and all normal.., and after sometime all same....restart....
Sometimes hashrate drops on all rigs at same time, sometimes there is difference in few hours before it drop on all rigs.
Other than this all cards are stable. Your miner is better than nanominer. On nanominer there is no drop, but speed is same as srbminer when hashrate drops
Hashrate drop is confirmed on pool
Also power consumption is lower on your miner
I use hiveos. I tried 0.6.8 and same.
V0.6.8
+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU
+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU
Not working for me in Ubuntu 20.04
./SRBMiner-MULTI: error while loading shared libraries: libssl.so.1.0.0: cannot open shared object file: No such file or directory
v0.6.7 worked OK.
CPU Ryzen 5 2600 cannot mining ERGO (Autolykos2)?
What's a good coin to mine these days? I've been out of the loop for a while.
this shows the pool:
Hash Rate 1 Hour 6 Hour 24 Hour
117.92 MH/s 141.52 MH/s 157.71 MH/s 157.62 MH/s
it shows the program:
[2021-02-26 01:01:42] GPU0 : 49.21 MH/s
[2021-02-26 01:01:42] GPU1 : 57.19 MH/s
[2021-02-26 01:01:42] GPU2 : 49.86 MH/s
[2021-02-26 01:01:42] GPU3 : 57.36 MH/s
[2021-02-26 01:01:42] Total: 213.62 MH/s
[2021-02-26 01:01:42] ==========================================================
[2021-02-26 01:01:42] GPU0 : [T: 57c RPM: 1891 CC: 1150MHz MC: 2050MHz]
[2021-02-26 01:01:42] GPU1 : [T: 47c RPM: 1161 CC: 1050MHz MC: 2000MHz]
[2021-02-26 01:01:42] GPU2 : [T: 50c RPM: 1309 CC: 1050MHz MC: 1975MHz]
[2021-02-26 01:01:42] GPU3 : [T: 57c RPM: 1207 CC: 1050MHz MC: 2000MHz]
QUESTION: who is lying?
Hash Rate 1 Hour 6 Hour 24 Hour
117.92 MH/s 141.52 MH/s 157.71 MH/s 157.62 MH/s
it shows the program:
[2021-02-26 01:01:42] GPU0 : 49.21 MH/s
[2021-02-26 01:01:42] GPU1 : 57.19 MH/s
[2021-02-26 01:01:42] GPU2 : 49.86 MH/s
[2021-02-26 01:01:42] GPU3 : 57.36 MH/s
[2021-02-26 01:01:42] Total: 213.62 MH/s
[2021-02-26 01:01:42] ==========================================================
[2021-02-26 01:01:42] GPU0 : [T: 57c RPM: 1891 CC: 1150MHz MC: 2050MHz]
[2021-02-26 01:01:42] GPU1 : [T: 47c RPM: 1161 CC: 1050MHz MC: 2000MHz]
[2021-02-26 01:01:42] GPU2 : [T: 50c RPM: 1309 CC: 1050MHz MC: 1975MHz]
[2021-02-26 01:01:42] GPU3 : [T: 57c RPM: 1207 CC: 1050MHz MC: 2000MHz]
QUESTION: who is lying?
Please help,
I use SRBMiner-Multi 0.6.5 for mining Haven (XHV) coin on haven.herominers.com.
After some time an error occurred: "couldn't connect to a devfee pool for a long time ... pause mining"
After that I have to restart the miner to continue working.
I use SRBMiner-Multi 0.6.5 for mining Haven (XHV) coin on haven.herominers.com.
After some time an error occurred: "couldn't connect to a devfee pool for a long time ... pause mining"
After that I have to restart the miner to continue working.
Your firewall/antivirus is blockin miner from accessing the devfee pool probably
When the miner connects to devfee pool and what is its address?
The firewall/antivirus should not be a problem because it leaks properly haven.herominers.com.
Please help me, I can't solve the problem with devpool, my miner pause mining every 2-3 hours.
What's the IP address of devpool?
For haven it's also herominers, so something must be blocking the outgoing devfee connection.
Please help,
I use SRBMiner-Multi 0.6.5 for mining Haven (XHV) coin on haven.herominers.com.
After some time an error occurred: "couldn't connect to a devfee pool for a long time ... pause mining"
After that I have to restart the miner to continue working.
I use SRBMiner-Multi 0.6.5 for mining Haven (XHV) coin on haven.herominers.com.
After some time an error occurred: "couldn't connect to a devfee pool for a long time ... pause mining"
After that I have to restart the miner to continue working.
Your firewall/antivirus is blockin miner from accessing the devfee pool probably
When the miner connects to devfee pool and what is its address?
The firewall/antivirus should not be a problem because it leaks properly haven.herominers.com.
Please help me, I can't solve the problem with devpool, my miner pause mining every 2-3 hours.
What's the IP address of devpool?
been long time not use this miner, i like the miner api for easy & simple http monitoring, well the development going really well
adding so much new algo in the current moment..is there any idea about infinite cache on new motherboard & rx 6000 series take advantage this new tech
its feel like vega at first time they using compute mode lol, and after couple months than miner full utilize the gpu's
adding so much new algo in the current moment..is there any idea about infinite cache on new motherboard & rx 6000 series take advantage this new tech
its feel like vega at first time they using compute mode lol, and after couple months than miner full utilize the gpu's
Doktor, I think you do speak with the Hiveos people.
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you
oh, sorry, with the 0.67 the disable works again
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you
oh, sorry, with the 0.67 the disable works again
actually you just put that parameter where you put the rest
Doktor, I think you do speak with the Hiveos people.
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you
oh, sorry, with the 0.67 the disable works again
Can you ask to modify their setting on autolykos2 ?
I don't want to mine with the CPU, but there is no place where to insert --disable-cpu so I have the CPU that's hot with basically no hash.
Thank you
oh, sorry, with the 0.67 the disable works again
V0.6.8
+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU
+ Added algorithm 'rx2' (LuxCoin) for CPU mining (8GB Ram needed), fee 1.25%
+ Performance increase on 'autolykos2' algorithm on Vega GPU's (~6-9%)
+ Performance increase on 'autolykos2' algorithm on rest GPU's (~3-5%)
+ Added abort mechanism for 'autolykos2' dataset creation on GPU
RX570 4GB - Ergo Hashrate & Profit with SRBMiner - https://www.youtube.com/watch?v=QuLAc0LGtHE
Thanks for the video
the miner writes - 250. The pool answers 150 maximum. PhoenixMiner syndrome - add fake speed. :-)
yes, add fake 66%, nobody will notice
the miner writes - 250. The pool answers 150 maximum. PhoenixMiner syndrome - add fake speed. :-)
RX570 4GB - Ergo Hashrate & Profit with SRBMiner - https://www.youtube.com/watch?v=QuLAc0LGtHE
Hello, sorry for my english.
How could this guy make 35-70 MH with the ryzen 5900x?
My ryzen 3600 gives - 4-7MH
or did he just call his video cards?
https://ergo.nanopool.org/account/9gPDyfqFSPYWCFvk8pggFQegvApcnKKbvM6YxbwCRuL9w2xYq7r
How could this guy make 35-70 MH with the ryzen 5900x?
My ryzen 3600 gives - 4-7MH
or did he just call his video cards?
https://ergo.nanopool.org/account/9gPDyfqFSPYWCFvk8pggFQegvApcnKKbvM6YxbwCRuL9w2xYq7r
I see several like the link you posted with rigs named after CPUS with 30-40MH.. Surely its not just a coincidence and all these people are renaming gpus rigs to cpu rigs.. ?
Hello, sorry for my english.
How could this guy make 35-70 MH with the ryzen 5900x?
My ryzen 3600 gives - 4-7MH
or did he just call his video cards?
https://ergo.nanopool.org/account/9gPDyfqFSPYWCFvk8pggFQegvApcnKKbvM6YxbwCRuL9w2xYq7r
How could this guy make 35-70 MH with the ryzen 5900x?
My ryzen 3600 gives - 4-7MH
or did he just call his video cards?
https://ergo.nanopool.org/account/9gPDyfqFSPYWCFvk8pggFQegvApcnKKbvM6YxbwCRuL9w2xYq7r
DoKtor:
1)Can you try to make dataset creation faster(and /or tell me what parameter I can use) on Autolycos2 ? I have a rig of 550 that spend more time creating dataset than finding share..
2)Do you have any suggestion on how OC cards for that Autolycos algo to reduce power consumption ( RX470)? I know how to do it for etash, and the "opposite " for CN, but I can't find good results with Autolycos
1)Can you try to make dataset creation faster(and /or tell me what parameter I can use) on Autolycos2 ? I have a rig of 550 that spend more time creating dataset than finding share..
2)Do you have any suggestion on how OC cards for that Autolycos algo to reduce power consumption ( RX470)? I know how to do it for etash, and the "opposite " for CN, but I can't find good results with Autolycos
1) I guess not, it's already 2x faster than Nanominer for example
2) Mem goes up as much as possible, mV down as much as it stays stable.
Jump to: