@doktor83
Do you know if the tool works with rx 570 powercolor red dragon 4gb card bios?
Im thinking of putting these in a future rig.
Topic: SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards - page 29. (Read 125165 times)
V2.53
- Added support for ASUS RX470 8G
- Added support for XFX RX580 8G
- Added support for SAPPHIRE PULSE RX580 4G
https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g
- Added support for ASUS RX470 8G
- Added support for XFX RX580 8G
- Added support for SAPPHIRE PULSE RX580 4G
https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g
V2.52
- Added support for SAPPHIRE PULSE ITX RX 570 4G
- Added support for MSI RX570 ARMOR 4G OC
- Added support for HIS RX570 4G
- Changed manufacturer detection code
https://mega.nz/#!rZQFlbbR!ql7Q9wI0MGLSeVIcDgOumImWH4BQdt3eLwh9IMv4wgI
- Added support for SAPPHIRE PULSE ITX RX 570 4G
- Added support for MSI RX570 ARMOR 4G OC
- Added support for HIS RX570 4G
- Changed manufacturer detection code
https://mega.nz/#!rZQFlbbR!ql7Q9wI0MGLSeVIcDgOumImWH4BQdt3eLwh9IMv4wgI
SAPPHIRE PULSE RX 580 4G is not supported?
ORIGIANL BIOS:
https://drive.google.com/open?id=0B6B-gy1xL4IERWVJR1dUTEdBTTg
+1 success. I used this to mod my Sapphire Nitro (non +) 8GB with Micron memory today, worked just fine to copy up the 1625 straps. Thanks!
thanks gonna try it
V2.52
- Added support for SAPPHIRE PULSE ITX RX 570 4G
- Added support for MSI RX570 ARMOR 4G OC
- Added support for HIS RX570 4G
- Changed manufacturer detection code
https://mega.nz/#!rZQFlbbR!ql7Q9wI0MGLSeVIcDgOumImWH4BQdt3eLwh9IMv4wgI
- Added support for SAPPHIRE PULSE ITX RX 570 4G
- Added support for MSI RX570 ARMOR 4G OC
- Added support for HIS RX570 4G
- Changed manufacturer detection code
https://mega.nz/#!rZQFlbbR!ql7Q9wI0MGLSeVIcDgOumImWH4BQdt3eLwh9IMv4wgI
Will add them today and release a new version.
When card is unknown you can still change everything except voltage and default clocks.
When card is unknown you can still change everything except voltage and default clocks.
are you sure voltage chamging works? i tried to change voltage on mai gaming 5704gb
by saving bios , then clicking the voltage drop down, i then saw the 925 greyed out, then saved
but the card is still drawing over 1000mv no where near 925, aloso why cant i chage that 925 to sonething lower
great tool btw i will donate once i get it all wking
Unfortunately there are a lot of mem. controller chip types, the solution i provide is "general" so it wont work with every card.
You have to change vddc (where it says 65288 mV), not only change the vddci with the dropdown.
On some cards these options do nothing...
BUT, here's a solution for you :
You took down the vddc to 1V, now you can lower it more with wattool.
I hate wattool, I don't even install it on my boxes
Will add them today and release a new version.
When card is unknown you can still change everything except voltage and default clocks.
When card is unknown you can still change everything except voltage and default clocks.
are you sure voltage chamging works? i tried to change voltage on mai gaming 5704gb
by saving bios , then clicking the voltage drop down, i then saw the 925 greyed out, then saved
but the card is still drawing over 1000mv no where near 925, aloso why cant i chage that 925 to sonething lower
great tool btw i will donate once i get it all wking
Unfortunately there are a lot of mem. controller chip types, the solution i provide is "general" so it wont work with every card.
You have to change vddc (where it says 65288 mV), not only change the vddci with the dropdown.
On some cards these options do nothing...
BUT, here's a solution for you :
You took down the vddc to 1V, now you can lower it more with wattool.
One more thing that seem all HIS rom had been recognized as XFX.
Because it looks like they don't have their own bios ver. so they use xfx-es.
Open a HIS bios in hex editor and see for yourself.
These bioses from the previous post contain :
XFX_160430HJPRO_CODE0720_HS_HY_12832_1256E1750MH5GC4H24AJR
One more thing that seem all HIS rom had been recognized as XFX.
Will add them today and release a new version.
When card is unknown you can still change everything except voltage and default clocks.
When card is unknown you can still change everything except voltage and default clocks.
are you sure voltage chamging works? i tried to change voltage on mai gaming 5704gb
by saving bios , then clicking the voltage drop down, i then saw the 925 greyed out, then saved
but the card is still drawing over 1000mv no where near 925, aloso why cant i chage that 925 to sonething lower
great tool btw i will donate once i get it all wking
Will add them today and release a new version.
When card is unknown you can still change everything except voltage and default clocks.
When card is unknown you can still change everything except voltage and default clocks.
Hi doktor83,
HIS RX470 and HIS RX570 seem unrecognized with v2.51
Show unknown model.
Can you help me to check it ?
https://ufile.io/a59rt
https://ufile.io/efj6e
http://2.pik.vn/2017b4548dc8-d304-4b3c-aa83-c674be4b632d.jpg
HIS RX470 and HIS RX570 seem unrecognized with v2.51
Show unknown model.
Can you help me to check it ?
https://ufile.io/a59rt
https://ufile.io/efj6e
http://2.pik.vn/2017b4548dc8-d304-4b3c-aa83-c674be4b632d.jpg
Great tool!
Experimenting with a Sapphire 580X limited edition card.
GPU-Z indicates the memory as Hynix
v2.51 lists the memories(! yes, SW uses the plural) as Samsung first and Hynix second.
What is going on?
TIA
Experimenting with a Sapphire 580X limited edition card.
GPU-Z indicates the memory as Hynix
v2.51 lists the memories(! yes, SW uses the plural) as Samsung first and Hynix second.
What is going on?
TIA
It just means that your bios has timings for 2 types of memories. You got phisically only one type on the board.
If gpu-z says its hynix, then probably it is
hi i see in the readme
V2.51
- Added support for Sapphire RX570 4G Pulse
i have that one Sapphire PULSE ITX Radeon RX 570 4GD5 (elpida)
but when i open the bios it s say bios is unknown
i upload my bios here https://ufile.io/jt01f
V2.51
- Added support for Sapphire RX570 4G Pulse
i have that one Sapphire PULSE ITX Radeon RX 570 4GD5 (elpida)
but when i open the bios it s say bios is unknown
i upload my bios here https://ufile.io/jt01f
Yeah, ITX is the small version of this card, not the same bioses
Will add this one, thanks for the .rom
hi i see in the readme
V2.51
- Added support for Sapphire RX570 4G Pulse
i have that one Sapphire PULSE ITX Radeon RX 570 4GD5 (elpida)
but when i open the bios it s say bios is unknown
i upload my bios here https://ufile.io/jt01f
V2.51
- Added support for Sapphire RX570 4G Pulse
i have that one Sapphire PULSE ITX Radeon RX 570 4GD5 (elpida)
but when i open the bios it s say bios is unknown
i upload my bios here https://ufile.io/jt01f
Great tool!
Experimenting with a Sapphire 580X limited edition card.
GPU-Z indicates the memory as Hynix
v2.51 lists the memories(! yes, SW uses the plural) as Samsung first and Hynix second.
What is going on?
TIA
Experimenting with a Sapphire 580X limited edition card.
GPU-Z indicates the memory as Hynix
v2.51 lists the memories(! yes, SW uses the plural) as Samsung first and Hynix second.
What is going on?
TIA
Ver 2.51
- Added support for Sapphire RX570 4G Pulse
- Added support for MSI RX570 ARMOR 4G OC
- Added length (in bits) displayed next to every field in strap editor
https://mega.nz/#!bQ4FXS5L!2w_AhuxY2_1wql4DLNaXkHcjQMVm9k-TdF-JfBMJKck
- Added support for Sapphire RX570 4G Pulse
- Added support for MSI RX570 ARMOR 4G OC
- Added length (in bits) displayed next to every field in strap editor
https://mega.nz/#!bQ4FXS5L!2w_AhuxY2_1wql4DLNaXkHcjQMVm9k-TdF-JfBMJKck
Ver 2.5
- Added memory timing strap editor (BETA)
- Added support for Asus RX570 4GB cards
https://mega.nz/#!KAJlHKDZ!Rp5YDu82ttbnZXEq49SR430V0sEPZw79riav5KtR2d4
dead link- Added memory timing strap editor (BETA)
- Added support for Asus RX570 4GB cards
https://mega.nz/#!KAJlHKDZ!Rp5YDu82ttbnZXEq49SR430V0sEPZw79riav5KtR2d4
yeah, had to re-upload it because after uploading i noticed a bug, so had to fix it, then upload again, so link changed.
Ver 2.5
- Added memory timing strap editor (BETA)
- Added support for Asus RX570 4GB cards
https://mega.nz/#!KAJlHKDZ!Rp5YDu82ttbnZXEq49SR430V0sEPZw79riav5KtR2d4
dead link - Added memory timing strap editor (BETA)
- Added support for Asus RX570 4GB cards
https://mega.nz/#!KAJlHKDZ!Rp5YDu82ttbnZXEq49SR430V0sEPZw79riav5KtR2d4
Jump to: