SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards - page 25.

Toxicable

newbie

Activity: 53

Merit: 0

Quote from: cvsea on May 27, 2017, 09:21:25 AM

This is a great tool! Managed to modify the bios (hex edit) of my sapphires nitro+ Samsung memory and now I can add voltage offset.
I found that setting a -150 actually gives -125 after flashing. -125 gives -100 so whatever you set seems to be off by 25mv.

http://imgur.com/a/7cI0Y

Prepping the rig for linux so I was wondering if anyone had any suggestions as how to set a proper fan curve through manipulating the numbers in the fan tab of SRB Polaris.

http://imgur.com/a/40p63

What version is this? I just downloaded 2.61 but it has a text field for voltages

niko2004x

member

Activity: 126

Merit: 10

Quote from: doktor83 on May 27, 2017, 04:35:11 PM

You guys are partially right, i released this to do something good for the community, but it looks like the community does not want to do any good for me.
Still counting 0 donations here Roll Eyes

As i made this for myself, to speed up basic bios editing stuff, one day i thought i would share it maybe someone else finds it useful too, and who knows, maybe i can earn some pennies.

In my opinion there is nothing good in releasing tools related to overclocking to mining community.
Difficulty automatically eats all the difference.
And there is one thing I understood for just a year in mining.
Most miners (like >99%) are very unwilling to pay anything for tools unless it leads to some big profits.
So donation scheme will not work.

Marvell1

legendary

Activity: 2408

Merit: 1102

Leading Crypto Sports Betting & Casino Platform

Quote from: doktor83 on May 27, 2017, 04:35:11 PM

You guys are partially right, i released this to do something good for the community, but it looks like the community does not want to do any good for me.
Still counting 0 donations here Roll Eyes

As i made this for myself, to speed up basic bios editing stuff, one day i thought i would share it maybe someone else finds it useful too, and who knows, maybe i can earn some pennies.

0 donations that bad, I'll send something your way i used your tool with mixed results right now just using PBE 1.4 now

doktor83

hero member

Activity: 2548

Merit: 626

You guys are partially right, i released this to do something good for the community, but it looks like the community does not want to do any good for me.
Still counting 0 donations here Roll Eyes

As i made this for myself, to speed up basic bios editing stuff, one day i thought i would share it maybe someone else finds it useful too, and who knows, maybe i can earn some pennies.

niko2004x

member

Activity: 126

Merit: 10

Quote from: Metroid on May 27, 2017, 10:07:40 AM

I don't understand why people use this tool, the 1,41 version works good and is open source. I don't understand why this coder will not open source it, this was forked right? so what is wrong about making the source code available or implementing in the original github page. Your work will be credited.

Users are free to do whatever they want, authors are free to do whatever they want too. End of story.

As a somewhat opposite opinion I do no understand why he released it at all.
It does something in addition to polaris editor functions and looks like original (at least partially), non forked work.
What wrong about not sharing at all and profiting by yourself?
Short answer, right or wrong is irrelevant, he is free to do whatever he want.

I have different opinion about releasing.
For example I written complete parser (and builder) for all atombios tables relevant to mining (and some others too)
and essentially have universal bios editor library for everything (yes I tested all variations) from HD 2xxx to yet unreleased Vega.
It can do everything that could be done with other bios editors and much more.
It will probably never be released.
I really do not care if this work is credited, profits i do care.

envaluecrypto

newbie

Activity: 29

Merit: 0

Koji je taj srpski forum? Nisam znao da ima Crypto forum u srbiji...

Metroid

sr. member

Activity: 2142

Merit: 353

Xtreme Monster

I don't understand why people use this tool, the 1,41 version works good and is open source. I don't understand why this coder will not open source it, this was forked right? so what is wrong about making the source code available or implementing in the original github page. Your work will be credited.

cvsea

member

Activity: 112

Merit: 10

This is a great tool! Managed to modify the bios (hex edit) of my sapphires nitro+ Samsung memory and now I can add voltage offset.
I found that setting a -150 actually gives -125 after flashing. -125 gives -100 so whatever you set seems to be off by 25mv.

http://imgur.com/a/7cI0Y

Prepping the rig for linux so I was wondering if anyone had any suggestions as how to set a proper fan curve through manipulating the numbers in the fan tab of SRB Polaris.

http://imgur.com/a/40p63

Billysls

newbie

Activity: 3

Merit: 0

hi,I edited the bios (RX 580 Gaming x 8gb) leaving the voltage at 1018mv, but the voltage is always at 1087mv (I looked after afterburner, trixx, hwinfo64), if I change some configuration on the wattman and apply (ex: change Core clock ) The voltage stay in 1006mv, even if I reset the wattman settings, but I do not want to change every time I reboot the pc, do you have any idea what it can be? Thank you in advance sorry for the text (and my English)

Wolf0

member

Activity: 81

Merit: 1002

It was only the wind.

Quote from: niko2004x on May 13, 2017, 01:25:42 AM

Quote from: Wolf0 on May 12, 2017, 09:12:13 AM

Quote from: doktor83 on May 12, 2017, 01:41:54 AM

it's not fake, but it won't work on every card.
+ there are things that can be done with i2c commands but can not be done directly in bios IMO.

There are, like VRM switching frequency. I wrote some tools that do this for me on common VRM controllers.

In IR3567B register for VRM switching frequency is known and preset for it could be added to VOI.
Or I am missing something?

You're missing that I can do it for IR3567B-compatibles, I can do it for NCP81022, uP9505, and RT8894A. I wish I could say I could do it for uP1801, which I also support, but it is quite the simple controller and doesn't have the option - only place I've seen it is as a secondary controller on one of my 290X cards to feed MVDDC.

Toxicable

newbie

Activity: 53

Merit: 0

RX 570 Nitro + 4GB
Changing the VDDCI dosen't appear to do anything

doktor83

hero member

Activity: 2548

Merit: 626

V2.61

- Added support for RX 460/560 Baffin cards (BETA)
- Added support for NCP81022 VRM
- Added support for a few 4XX/5XX cards

https://mega.nz/#F!TVgGHQZS!yfmtIvbF67iS4QrEJqb26g

Lollaskates

sr. member

Activity: 249

Merit: 250

Hey doktor,

I just picked up a VisionTek Reference RX570 4GB and it shows up as "unknown bios" with your tool (yet works fine in others). I'd like to modify the voltages with it (essentially hardcode into the bios a VDDC offset). I've looked all over and nobody seems keen on sharing how to do it (or write a tool for one).

would you be able to help me out? I would be happy to tip.

I've uploaded my BIOS here: https://mega.nz/#!jtQFjJAR!dW8Fl_OJHPR2Q99UeatUBvoFM81LHa4Xv7_kaSHHM-4

akvlad

newbie

Activity: 3

Merit: 0

Quote from: doktor83 on May 24, 2017, 12:19:05 AM

Quote from: akvlad on May 23, 2017, 10:23:11 PM

Quote from: doktor83 on May 23, 2017, 01:47:46 PM

Quote from: akvlad on May 23, 2017, 08:21:45 AM

Hello! Could you please add support for Asus ROG-STRIX-RX570-O4G-GAMING (with Elpida/Hynix) memory.
I tried v.2.56 and got error 43 after flash it (like with Polaris Polaris Editor different versions)
BIOS link: https://drive.google.com/file/d/0B8_nAM7w1FWMUkZHQ1FpUUdOcUU/view?usp=sharing
Hope you will help

Why don't you try the latest version V2.6 ?

This morning used version 2.6, but error is the same (Windows has stopped this device because it has reported problems)
Bios was programmed with uninstalled drivers (by DDU), and then new drivers were installed.
this is how this error looks
Original bios works fine, no errors.

Your problem isn't SRBPolaris, it's the modified vbios, that's why the original bios works.
You need to use patched video drivers.

Thank you! Now everything works fine.
I disable bios signature check with this toolhttps://www.monitortests.com/forum/Thread-AMD-ATI-Pixel-Clock-Patcher

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: akvlad on May 23, 2017, 10:23:11 PM

Quote from: doktor83 on May 23, 2017, 01:47:46 PM

Quote from: akvlad on May 23, 2017, 08:21:45 AM

Hello! Could you please add support for Asus ROG-STRIX-RX570-O4G-GAMING (with Elpida/Hynix) memory.
I tried v.2.56 and got error 43 after flash it (like with Polaris Polaris Editor different versions)
BIOS link: https://drive.google.com/file/d/0B8_nAM7w1FWMUkZHQ1FpUUdOcUU/view?usp=sharing
Hope you will help

Why don't you try the latest version V2.6 ?

This morning used version 2.6, but error is the same (Windows has stopped this device because it has reported problems)
Bios was programmed with uninstalled drivers (by DDU), and then new drivers were installed.
this is how this error looks

Original bios works fine, no errors.

Your problem isn't SRBPolaris, it's the modified vbios, that's why the original bios works.
You need to use patched video drivers.

bughatti

full member

Activity: 154

Merit: 100

FYI, I was finally able to add a VDDC offset in a rom, see post here

https://bitcointalksearch.org/topic/m.19149895

Thanks for SRBPolaris, made it much easier!

akvlad

newbie

Activity: 3

Merit: 0

Quote from: doktor83 on May 23, 2017, 01:47:46 PM

Quote from: akvlad on May 23, 2017, 08:21:45 AM

Hello! Could you please add support for Asus ROG-STRIX-RX570-O4G-GAMING (with Elpida/Hynix) memory.
I tried v.2.56 and got error 43 after flash it (like with Polaris Polaris Editor different versions)
BIOS link: https://drive.google.com/file/d/0B8_nAM7w1FWMUkZHQ1FpUUdOcUU/view?usp=sharing
Hope you will help

Why don't you try the latest version V2.6 ?

This morning used version 2.6, but error is the same (Windows has stopped this device because it has reported problems)
Bios was programmed with uninstalled drivers (by DDU), and then new drivers were installed.
this is how this error looks https://image.ibb.co/cOavSa/error43.png

Original bios works fine, no errors.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: akvlad on May 23, 2017, 08:21:45 AM

Hello! Could you please add support for Asus ROG-STRIX-RX570-O4G-GAMING (with Elpida/Hynix) memory.
I tried v.2.56 and got error 43 after flash it (like with Polaris Polaris Editor different versions)
BIOS link: https://drive.google.com/file/d/0B8_nAM7w1FWMUkZHQ1FpUUdOcUU/view?usp=sharing
Hope you will help

Why don't you try the latest version V2.6 ?

navydude

sr. member

Activity: 283

Merit: 250

Would someone look at this? I have never modded these before. Getting unknown bios error! 512kb rom I guess is the issue. Just dont want to mess up my cards when I reflash.

http://s000.tinyupload.com/?file_id=48977972526534149627

akvlad

newbie

Activity: 3

Merit: 0

Hello! Could you please add support for Asus ROG-STRIX-RX570-O4G-GAMING (with Elpida/Hynix) memory.
I tried v.2.56 and got error 43 after flash it (like with Polaris Polaris Editor different versions)
BIOS link: https://drive.google.com/file/d/0B8_nAM7w1FWMUkZHQ1FpUUdOcUU/view?usp=sharing
Hope you will help

Topic: SRBPolaris V3.5 - BIOS editor for AMD RX4XX and RX5XX cards - page 25. (Read 125165 times)