Swedish ASIC miner company kncminer.com - page 1235.

crumbs

full member

Activity: 210

Merit: 100

Quote from: Tweak25 on October 23, 2013, 12:54:20 PM

...
Can you help a (very excited) brother out?

Thanks very much.
John

[EDIT] I AM trying to catch up ... but I'm still about hundred pages behind.

1. Disconnect PS from the miner.
2. Make sure the paperclip (bare metal, not painted) is stuck between green & black wires.
3. Turn on PS.
A. If it turns on & fan spins, go to 4.
B. If it doesn't, doublecheck the paperclip. If nothing -> dead PS Cry

4. Shut off PS, wait 30 secs, plug PS into *one board* of the the miner, try again.
A. If OK, repeat 4 with next board.
B. If not, unplug board & try next one.
5. Post on how it goes.
& will talk you through from there Cheesy

Tweak25

jr. member

Activity: 30

Merit: 12

Yeah yeah, it's totally green to black.

And yeah, I hear you on the fan not necessarily being indicative.
However, the lack of movement on the fans of the Jupiter would be - as I indicated.

Anyway, bummer.

Dead PSU out of the box sure seems unlikely. Oh well

loktang1125

full member

Activity: 164

Merit: 100

Quote from: Phoenix1969 on October 23, 2013, 01:16:31 PM

Quote from: Tweak25 on October 23, 2013, 12:54:20 PM

Hey - I apologize profusely ... I imagine this HAS been answered before.

I was away for a week, just got back - and found my Jupiter waiting for me.

The problem is, can't get the thing to boot.

Have an XFX pro 1050W modular to run it.

Everything looks connected fine ... pci-e's are solid and the molex is in.
Paper clip tricked it on pins 4-5, 4-6, 4-whatever the one that's a row down and over is .... all with the same results .... PS fan and the jupiter fans spin for a sec, then nothing.

Not getting any lights, or anything else. That's it.

Now I'm wondering if I have a dead supply out of the box, which seems unlikely .... or if I'm simply fucking something up .... which sounds much more likely.

Can you help a (very excited) brother out?

Thanks very much.
John

[EDIT] I AM trying to catch up ... but I'm still about hundred pages behind.

yep, dead psu
make sure it was the GREEN wire, and the black one next to it.
the fan on the psu works = psu works

some psu fan might off when it is on a light load

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: Tweak25 on October 23, 2013, 12:54:20 PM

Hey - I apologize profusely ... I imagine this HAS been answered before.

I was away for a week, just got back - and found my Jupiter waiting for me.

The problem is, can't get the thing to boot.

Have an XFX pro 1050W modular to run it.

Everything looks connected fine ... pci-e's are solid and the molex is in.
Paper clip tricked it on pins 4-5, 4-6, 4-whatever the one that's a row down and over is .... all with the same results .... PS fan and the jupiter fans spin for a sec, then nothing.

Not getting any lights, or anything else. That's it.

Now I'm wondering if I have a dead supply out of the box, which seems unlikely .... or if I'm simply fucking something up .... which sounds much more likely.

Can you help a (very excited) brother out?

Thanks very much.
John

[EDIT] I AM trying to catch up ... but I'm still about hundred pages behind.

yep, dead psu
make sure it was the GREEN wire, and the black one next to it.
the fan on the psu works = psu works

Tweak25

jr. member

Activity: 30

Merit: 12

Roughly one second.

I'm talking 1-3 revolutions of the fan.
It's on, then it's instantly off.

It's not even getting to boot, so can't see it being firmware.

This seems squarely a hardware / me screwing it up somehow-ware issue.

Korbman

legendary

Activity: 1064

Merit: 1001

Quote from: Tweak25 on October 23, 2013, 12:54:20 PM

Hey - I apologize profusely ... I imagine this HAS been answered before.

I was away for a week, just got back - and found my Jupiter waiting for me.

The problem is, can't get the thing to boot.

Have an XFX pro 1050W modular to run it.

Everything looks connected fine ... pci-e's are solid and the molex is in.
Paper clip tricked it on pins 4-5, 4-6, 4-whatever the one that's a row down and over is .... all with the same results .... PS fan and the jupiter fans spin for a sec, then nothing.

Not getting any lights, or anything else. That's it.

Now I'm wondering if I have a dead supply out of the box, which seems unlikely .... or if I'm simply fucking something up .... which sounds much more likely.

Can you help a (very excited) brother out?

Thanks very much.
John

[EDIT] I AM trying to catch up ... but I'm still about hundred pages behind.

I had this exact issue when I first got mine. The issue is fixed by upgrading the firmware (which for me was stock to .95, but I'm sure going right to .97 will work too).

The challenge was getting into the web interface and then uploading/installing the firmware all before the unit shut off. How long does it typically stay on before it powers down again? I usually had about 60 seconds or so.

loktang1125

full member

Activity: 164

Merit: 100

Quote from: warhawk187 on October 23, 2013, 12:52:31 PM

After tinkering with enabled cores in 0.95, then upgrading to 0.96 and then today to 0.97, my Saturn is currently outputting ~278Gh/s with all 100% of my cores enabled. My WU went up to just over 4,000/m and my flushwork issue has gotten much better.

278ghs is nice for saturn, two of my Jupiter WU get very close to 8k but they cant made it :-(

sbfree

sr. member

Activity: 336

Merit: 250

Quote from: warhawk187 on October 23, 2013, 12:52:31 PM

After tinkering with enabled cores in 0.95, then upgrading to 0.96 and then today to 0.97, my Saturn is currently outputting ~278Gh/s with all 100% of my cores enabled. My WU went up to just over 4,000/m and my flushwork issue has gotten much better.

My saturn envies your saturn Embarrassed

Tweak25

jr. member

Activity: 30

Merit: 12

Hey - I apologize profusely ... I imagine this HAS been answered before.

I was away for a week, just got back - and found my Jupiter waiting for me.

The problem is, can't get the thing to boot.

Have an XFX pro 1050W modular to run it.

Everything looks connected fine ... pci-e's are solid and the molex is in.
Paper clip tricked it on pins 4-5, 4-6, 4-whatever the one that's a row down and over is .... all with the same results .... PS fan and the jupiter fans spin for a sec, then nothing.

Not getting any lights, or anything else. That's it.

Now I'm wondering if I have a dead supply out of the box, which seems unlikely .... or if I'm simply fucking something up .... which sounds much more likely.

Can you help a (very excited) brother out?

Thanks very much.
John

[EDIT] I AM trying to catch up ... but I'm still about hundred pages behind.

sbfree

sr. member

Activity: 336

Merit: 250

Quote from: loktang1125 on October 23, 2013, 12:45:07 PM

Quote from: sbfree on October 23, 2013, 12:33:32 PM

KnC 0: | 263.0G/258.5Gh/s | A:643328 R:17152 HW:190848 WU:4047.9

is something wrong here? Huh

did you try 0.95 and 0.97?
if it happen in all FW, you might need to give your miner more airflow

thanks for the input, but unlikely as both chips are well below 50c.

I don't know diddly, but I think its a software issue, hoping SOMEONE puts up an easy plain English for dummies on how to install and run BFGMINER.....

warhawk187

sr. member

Activity: 327

Merit: 250

After tinkering with enabled cores in 0.95, then upgrading to 0.96 and then today to 0.97, my Saturn is currently outputting ~278Gh/s with all 100% of my cores enabled. My WU went up to just over 4,000/m and my flushwork issue has gotten much better.

ElGabo

hero member

Activity: 635

Merit: 500

Quote from: CYPER on October 23, 2013, 12:17:57 PM

Quote from: ElGabo on October 23, 2013, 12:09:47 PM

I think everybody has to start somewhere. There are always issues what you can't see in the future.

They made a good product, they hadn't stole our money, they had shipped close to time.

Show me an asic company how made the same.....

Of course they learned a lot and won't make the same issues at gen 2.

That my 2 c.

I assume you have received your miner?

Yes I have. And you will.

Not like Avalon or Bfl.....

loktang1125

full member

Activity: 164

Merit: 100

Quote from: Rawbit on October 23, 2013, 12:44:53 PM

Quote from: loktang1125 on October 23, 2013, 12:41:45 PM

Quote from: ncs0ne on October 23, 2013, 12:30:58 PM

Quote from: loktang1125 on October 23, 2013, 11:41:04 AM

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

you dont know the way to ask question that make you look like a fool

How you get such score? :-)

by putty, you could download it and login to your rig by
id : root
pw : admin
then type : screen -r

paranoidx

full member

Activity: 146

Merit: 100

Quote from: loktang1125 on October 23, 2013, 11:41:04 AM

I want to sell one of my jewpiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

Sounds legit.

loktang1125

full member

Activity: 164

Merit: 100

Quote from: sbfree on October 23, 2013, 12:33:32 PM

KnC 0: | 263.0G/258.5Gh/s | A:643328 R:17152 HW:190848 WU:4047.9

is something wrong here? Huh

did you try 0.95 and 0.97?
if it happen in all FW, you might need to give your miner more airflow

Rawbit

newbie

Activity: 53

Merit: 0

Quote from: loktang1125 on October 23, 2013, 12:41:45 PM

Quote from: ncs0ne on October 23, 2013, 12:30:58 PM

Quote from: loktang1125 on October 23, 2013, 11:41:04 AM

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

you dont know the way to ask question that make you look like a fool
http://holland.pk/1bmn

How you get such score? :-)

loktang1125

full member

Activity: 164

Merit: 100

Quote from: ncs0ne on October 23, 2013, 12:30:58 PM

Quote from: loktang1125 on October 23, 2013, 11:41:04 AM

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

you dont know the way to ask question that make you look like a fool

sbfree

sr. member

Activity: 336

Merit: 250

KnC 0: | 263.0G/258.5Gh/s | A:643328 R:17152 HW:190848 WU:4047.9

is something wrong here? Huh

ncs0ne

full member

Activity: 147

Merit: 100

software developer

Quote from: loktang1125 on October 23, 2013, 11:41:04 AM

I want to sell one of my jepiter
i have three of them and they are all running over 555ghs
pm if interested for more info or pic
accept bitcoin payment only (bank transfer to oversea costing too many time which is reducing you profit)

yea sure, yours are running 555+ while all others are below...
*I'd recommend to not make deals with this person without escrow*

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: zoro on October 23, 2013, 10:01:35 AM

i got my Mercury today. very quiet at 100GH with 0.9.7 FW
120W/220v !!!
great job KNC
i guess we cannot overclock it yet :p

so, you are happy with 100 gh/s?, even though it's 25 gh/s short?
guess many are.
all my saturns returned right back to their norms, but with slight difference...
256, 263, and 279. I really like the 279,....
but geeze. I feel like a squid broker after my first pump & dump.
ill live... I reccon.
but I would still like to fix the 256 saturn tho. when I use enablecores, it goes all the way up to 280 on 0.90 at first, but slows to 250
reflashing the firmware always has the same result on it, it always returns to 250, and takes hours to return to 255.

Topic: Swedish ASIC miner company kncminer.com - page 1235. (Read 3049528 times)