Swedish ASIC miner company kncminer.com - page 1239.

cet

member

Activity: 100

Merit: 10

does anyone know how to get the web interface to connect to the cgminer api correctly? I just did an update from .95 to .97 and the miner status data doesn't display correctly.

Code:

Mining Status

CGMiner Status	Running (Connect to CGMiner API failed)
Last Checked	
Avg. Hash Rate	
WU	
Difficulty Accepted	
HW Status

ASIC slot #1	50.0 ℃
ASIC slot #2	-
ASIC slot #3	60.0 ℃
ASIC slot #4	53.0 ℃
ASIC slot #5	48.0 ℃
ASIC slot #6	-

Thanks,
/cet

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: plasmoske on October 23, 2013, 08:43:08 AM

I don't see any satire at all in my posts

Anyone is free to do whatever. Just know there are risks in doing so.

Underperforming miners eh? I thought your 3 were pretty good.

they were 255, 265, and 275
the 255 sat is like a jup at 510... you call that good?
0.97 made it 220
it made the one with 265, now 260
the 3rd, one was 275, is 275

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

I don't see any satire at all in my posts

Anyone is free to do whatever. Just know there are risks in doing so.

Underperforming miners eh? I thought your 3 were pretty good.

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: plasmoske on October 23, 2013, 08:35:50 AM

recommended. not required.

Your miners were working very well before yet you still decided to tinker with it anyway by updating the firmware.

The main rule of thumb when updating any drivers/firmware for anything is that things can break or go wrong.

Quote from: plasmoske on October 23, 2013, 08:35:50 AM

recommended. not required.

Your miners were working very well before yet you still decided to tinker with it anyway by updating the firmware.

The main rule of thumb when updating any drivers/firmware for anything is that things can break or go wrong.

I don't really appreciate the satire, especially since the two were underperforming to begin with... so everyone should just not update anything cause you said so, eh? Even when KNC recommends it.. . I hope it happens to you as well.

Rampion

legendary

Activity: 1148

Merit: 1018

Quote from: plasmoske on October 23, 2013, 08:35:50 AM

recommended. not required.

Your miners were working very well before yet you still decided to tinker with it anyway by updating the firmware.

The main rule of thumb when updating any drivers/firmware for anything is that things can break or go wrong.

This. If ain't broken...

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

recommended. not required.

Your miners were working very well before yet you still decided to tinker with it anyway by updating the firmware.

The main rule of thumb when updating any drivers/firmware for anything is that things can break or go wrong.

sickpig

legendary

Activity: 1260

Merit: 1008

Quote from: jelin1984 on October 23, 2013, 08:29:30 AM

i think so yes

I'm glad

have you already upgraded to 0.97?

jelin1984

legendary

Activity: 2408

Merit: 1004

check a lot before install new firmware

sickpig

legendary

Activity: 1260

Merit: 1008

Quote from: ?? on ??

with 0.97 firmware
i go from 540gh to 550gh

Grin

so eventually you were able to resurrect your dead die through enablecore.bin?

trepex

sr. member

Activity: 266

Merit: 250

After 85 minutes on 0.97 I can confirm that
- the flushworks is much better now
- the average performance is better than on 0.96 (at least with very good cooling) - I would say 2-3 more Gh/s

cgminer version 3.4.0 - Started: [2013-10-23 11:58:39]
--------------------------------------------------------------------------------
(5s):206.4G (avg):277.0Gh/s | A:313088 R:1792 HW:24626 WU:4027.0/m
ST: 2 SS: 0 NB: 16 LW: 351664 GF: 0 RF: 0
Connected to mint.bitminter.com diff 256 with stratum as user *******
Block: 000595984690bae0... Diff:268M Started: [13:17:35] Best share: 458K
--------------------------------------------------------------------------------
[P]ool management [ S ]ettings [D]isplay options [Q]uit
KnC 0: | 282.7G/277.3Gh/s | A:313088 R:1536 HW:24630 WU:4027.7/m
--------------------------------------------------------------------------------

Temperatures reported by bertmod on my Saturn: 36,5 and 36C. All cores up.

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: plasmoske on October 23, 2013, 08:19:18 AM

Quote from: Phoenix1969 on October 23, 2013, 07:58:09 AM

I'm pissed off now for sure.
.97 SLOWED 2 of 3 SATURNs
wtfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
enjoy?... yeah, right.

You knew the risks when you chose to update it

If you're not prepared for doom, just leave it the way it is.

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

Phoenix just wait a couple of minutes to settle again.
At first i was seeing ultra low speeds as well but after like 15 minutes it was showing steady about the same numbers on average hash rate, however i would like to know what the impact is from higher WU on the pool.
On the pool its still not settled and jumps from 240 to 340 Gh so i think that needs to settle in time as well

plasmoske

sr. member

Activity: 308

Merit: 251

The realist

Quote from: Phoenix1969 on October 23, 2013, 07:58:09 AM

I'm pissed off now for sure.
.97 SLOWED 2 of 3 SATURNs
wtfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
enjoy?... yeah, right.

You knew the risks when you chose to update it Roll Eyes

If you're not prepared for doom, just leave it the way it is.

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

reboot...same
coldstart...
same
enablecores & coldstart.. 2 of 3 are back to old numbers..., 1 is 20gh/s slower than it was
guess time will tell...uuugghhf

bronan

hero member

Activity: 774

Merit: 500

Lazy Lurker Reads Alot

Not sure why some are seeing lesser results mine jumped up
On average still getting 260 Gh with FW 0.97
However the WU jumped from 3800 to 4054

Check the temps Cheesy

, used an old fan to blow under the boards and temp dropped 18 C on that hot asic

Altomesi

newbie

Activity: 19

Merit: 0

WU improved on my Merc with .97 from .96 as well. Flushwork does seem quicker as well. We'll see in a few hours how it really holds up to the test tho.

Sparks

jr. member

Activity: 70

Merit: 2

Quote from: Phoenix1969 on October 23, 2013, 07:58:09 AM

I'm pissed off now for sure.
.97 SLOWED 2 of 3 SATURNs
wtfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
enjoy?... yeah, right.

My saturn speeded up with 0.97, best WU (over 4000) ever and best hashrate, but need some hours for real judge.

loktang1125

full member

Activity: 164

Merit: 100

Quote from: Phoenix1969 on October 23, 2013, 07:58:09 AM

I'm pissed off now for sure.
.97 SLOWED EVERY SATURN
wtfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
enjoy?... yeah, right.

it works on jupiter, it has bette WU

FiatKiller

sr. member

Activity: 378

Merit: 250

Quote from: Phoenix1969 on October 23, 2013, 07:58:09 AM

I'm pissed off now for sure.
.97 SLOWED EVERY SATURN
wtfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff

reboot again - most of us are seeing an improvement

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

I'm pissed off now for sure.
.97 SLOWED 2 of 3 SATURNs
wtfffffffffffffffffffffffffffffffffffffffffffffffffffffffffffff
enjoy?... yeah, right.

Topic: Swedish ASIC miner company kncminer.com - page 1239. (Read 3049528 times)