Author

Topic: Swedish ASIC miner company kncminer.com - page 1292. (Read 3050068 times)

hero member
Activity: 784
Merit: 1000
October 17, 2013, 01:14:26 PM
Wow searing has officially saved my ass.

On the phone with DHL as we speak.  They said that KNC never entered a zip code on my shipping address and that it was NOT going to my destination.  I double checked my order details and sure enough I entered everything correctly.

PLEASE DO YOURSELF A FAVOR AND CALL DHL. 

Also I was told that my stuff was stuck with customs and I won't likely see anything until Monday what a bummer. oh well Im glad its en route

Saved me too! Thanks, Searing!!!! My gear was headed to the wrong state! DHL had the same city name, but different state and zip code. Phew! The rep said it'd arrive tommorow (Friday).

1-800-225-5345

Tagging this post for future reference.
full member
Activity: 157
Merit: 100
October 17, 2013, 01:12:05 PM
Wow searing has officially saved my ass.

On the phone with DHL as we speak.  They said that KNC never entered a zip code on my shipping address and that it was NOT going to my destination.  I double checked my order details and sure enough I entered everything correctly.

PLEASE DO YOURSELF A FAVOR AND CALL DHL. 

Also I was told that my stuff was stuck with customs and I won't likely see anything until Monday what a bummer. oh well Im glad its en route

Saved me too! Thanks, Searing!!!! My gear was headed to the wrong state! DHL had the same city name, but different state and zip code. Phew! The rep said it'd arrive tommorow (Friday).

1-800-225-5345
hero member
Activity: 784
Merit: 1000
October 17, 2013, 01:10:01 PM
Jupiter 0.96

In /config is a log called asic_test  here are my results.


LM75 error: Bad ID 0xFFFFFFFF
ASIC board #5 has 0 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[2] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[4] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[7] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
SPI detected, but no KnCminer cores
SPI test failed!
EEPROM read failed!
EEPROM write failed!
root@Jupiter-3B3:/config# pwd
/config
root@Jupiter-3B3:/config# ls -ltr
-rwxr-xr-x    1 root     root           634 Jan  1  2000 shadow.factory
-rwxr-xr-x    1 root     root           634 Jan  1  2000 shadow
-rwxr-xr-x    1 root     root            31 Jan  1  2000 network.conf.factory
-rwxr-xr-x    1 root     root            31 Jan  1  2000 network.conf
-rwxr-xr-x    1 root     root            63 Jan  1  2000 lighttpd-htdigest.user
-rwxr-xr-x    1 root     root           161 Jan  1  2000 cgminer.conf.factory
-rwxr-xr-x    1 root     root          1943 Jan  1  2000 asic_test
-rwxr-xr-x    1 root     root             0 Oct 16 13:04 dropbear
-rwxr-xr-x    1 root     root           427 Oct 16 13:04 dropbear_rsa_host_key
-rwxr-xr-x    1 root     root           188 Oct 17 17:37 cgminer.conf
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config# more asic_test


ASIC board #0 has 4 DC/DC
Found a KnC miner with 192 cores
KnC ASICs: good cores: 53 from 192
KnC ASICs: good cores after re-test: 83 from 192
KnC ASICs: good cores after re-test: 105 from 192
Good cores map:
 00 00 00 00 00 00 00 00 00 00 10 C3 3C FB DD EF FE FF EE F3 FF FE FF FF


LM75 error: Bad ID 0xFFFFFFFF
ASIC board #1 has 0 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[2] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[4] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[7] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
SPI detected, but no KnCminer cores
SPI test failed!
EEPROM read failed!
EEPROM write failed!


ASIC board #2 has 4 DC/DC
Found a KnC miner with 192 cores
KnC ASICs: good cores: 85 from 192
KnC ASICs: good cores after re-test: 120 from 192
KnC ASICs: good cores after re-test: 133 from 192
Good cores map:
 EC B5 FE FD FE 3D 00 00 00 00 00 00 0C 32 C3 3C F0 CF 00 00 00 00 00 00


ASIC board #3 has 3 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
Found a KnC miner with 192 cores
KnC ASICs: good cores: 57 from 192
KnC ASICs: good cores after re-test: 65 from 192
KnC ASICs: good cores after re-test: 74 from 192
Good cores map:
 00 00 00 00 00 00 6C B3 E3 FF F3 FF 3E BE EB 3E BF FF BE FB FF FF FF FF


ASIC board #4 has 4 DC/DC
Found a KnC miner with 192 cores
KnC ASICs: good cores: 176 from 192
KnC ASICs: good cores after re-test: 188 from 192
KnC ASICs: good cores after re-test: 188 from 192
Good cores map:
 00 00 00 00 03 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


LM75 error: Bad ID 0xFFFFFFFF
ASIC board #5 has 0 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[2] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[4] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[7] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
SPI detected, but no KnCminer cores
SPI test failed!
EEPROM read failed!
EEPROM write failed!
root@Jupiter-3B3:/config#

Enjoy and Discuss

Was it previously working with 0.95?  Can you flash it back?
member
Activity: 113
Merit: 10
October 17, 2013, 12:52:08 PM
Jupiter 0.96

In /config is a log called asic_test  here are my results.


LM75 error: Bad ID 0xFFFFFFFF
ASIC board #5 has 0 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[2] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[4] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[7] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
SPI detected, but no KnCminer cores
SPI test failed!
EEPROM read failed!
EEPROM write failed!
root@Jupiter-3B3:/config# pwd
/config
root@Jupiter-3B3:/config# ls -ltr
-rwxr-xr-x    1 root     root           634 Jan  1  2000 shadow.factory
-rwxr-xr-x    1 root     root           634 Jan  1  2000 shadow
-rwxr-xr-x    1 root     root            31 Jan  1  2000 network.conf.factory
-rwxr-xr-x    1 root     root            31 Jan  1  2000 network.conf
-rwxr-xr-x    1 root     root            63 Jan  1  2000 lighttpd-htdigest.user
-rwxr-xr-x    1 root     root           161 Jan  1  2000 cgminer.conf.factory
-rwxr-xr-x    1 root     root          1943 Jan  1  2000 asic_test
-rwxr-xr-x    1 root     root             0 Oct 16 13:04 dropbear
-rwxr-xr-x    1 root     root           427 Oct 16 13:04 dropbear_rsa_host_key
-rwxr-xr-x    1 root     root           188 Oct 17 17:37 cgminer.conf
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config#
root@Jupiter-3B3:/config# more asic_test


ASIC board #0 has 4 DC/DC
Found a KnC miner with 192 cores
KnC ASICs: good cores: 53 from 192
KnC ASICs: good cores after re-test: 83 from 192
KnC ASICs: good cores after re-test: 105 from 192
Good cores map:
 00 00 00 00 00 00 00 00 00 00 10 C3 3C FB DD EF FE FF EE F3 FF FE FF FF


LM75 error: Bad ID 0xFFFFFFFF
ASIC board #1 has 0 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[2] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[4] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[7] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
SPI detected, but no KnCminer cores
SPI test failed!
EEPROM read failed!
EEPROM write failed!


ASIC board #2 has 4 DC/DC
Found a KnC miner with 192 cores
KnC ASICs: good cores: 85 from 192
KnC ASICs: good cores after re-test: 120 from 192
KnC ASICs: good cores after re-test: 133 from 192
Good cores map:
 EC B5 FE FD FE 3D 00 00 00 00 00 00 0C 32 C3 3C F0 CF 00 00 00 00 00 00


ASIC board #3 has 3 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
Found a KnC miner with 192 cores
KnC ASICs: good cores: 57 from 192
KnC ASICs: good cores after re-test: 65 from 192
KnC ASICs: good cores after re-test: 74 from 192
Good cores map:
 00 00 00 00 00 00 6C B3 E3 FF F3 FF 3E BE EB 3E BF FF BE FB FF FF FF FF


ASIC board #4 has 4 DC/DC
Found a KnC miner with 192 cores
KnC ASICs: good cores: 176 from 192
KnC ASICs: good cores after re-test: 188 from 192
KnC ASICs: good cores after re-test: 188 from 192
Good cores map:
 00 00 00 00 03 0C 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00


LM75 error: Bad ID 0xFFFFFFFF
ASIC board #5 has 0 DC/DC
MEGADLYNX[0] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[2] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[4] error: Bad PMBUS revision 0xFFFFFFFF
MEGADLYNX[7] error: Bad PMBUS revision 0xFFFFFFFF
I2C test failed!
SPI detected, but no KnCminer cores
SPI test failed!
EEPROM read failed!
EEPROM write failed!
root@Jupiter-3B3:/config#

Enjoy and Discuss
legendary
Activity: 1456
Merit: 1018
HoneybadgerOfMoney.com Weed4bitcoin.com
October 17, 2013, 12:48:22 PM
Wow searing has officially saved my ass.


On the phone with DHL as we speak.  They said that KNC never entered a zip code on my shipping address and that it was NOT going to my destination.  I double checked my order details and sure enough I entered everything correctly.



PLEASE DO YOURSELF A FAVOR AND CALL DHL.  

Also I was told that my stuff was stuck with customs and I won't likely see anything until Monday what a bummer. oh well Im glad its en route
copper member
Activity: 2898
Merit: 1465
Clueless!
October 17, 2013, 12:32:26 PM
36X Day 2 here just changed status to "Shipped" its a pickup so I guess they have to now ship it to their office where it can be picked up from as I imagine they don't want ppl having around the factory.

just a note my 304x unit just got the tracking number like 2hrs ago it is showing DHL tomorrow (Friday) i'd call if DHL and set things up at least they can give you the DAY it arrives from this number 1-800-225-5345 er again the tracking number shows Brussels calling the number and a live person told me it would arrive tomorrow ..(I was shocked) just so you are warned!

anyway the point of this is it took 2 1/2 days to go from Sweden to the Midwest usa...so jump on the DHL tracking when you get the number imho

Searing

My Mercury is, according to DHL, in Brussels since 1:44AM, processed in Brussels at 11:15AM.  Calling I found I can expect delivery tomorrow by end of the business day.

DHL instead of UPS, not sure if that's good or bad. Is your Mercury going to the USA? I can't imagine mine getting to me tomorrow from Brussels...






http://postimg.org/image/fblcmw481

My tracking screen is exactly the same. Same dates and times.

This is what the guy said at DHL when I gave him my Brussels tracking number (1-800-225-5345) ...maybe it is scanned in Brussels goes on a plane and is not scanned again till it hits the truck to ship it to me ..no idea..but he said between 10am and 8pm tomorrow Friday 10/17/2013 (maybe Brussels is code for "teleport'

Searing
copper member
Activity: 2898
Merit: 1465
Clueless!
October 17, 2013, 12:18:45 PM
ok news my #304x order Jupiter will arrive on Friday 10/18/13 instead of Monday as I thought
I just got the DHL tracking number and it says Brussels...I called 1-800-225-5345 and they said it will arrive tomorrow(shocked I was)
Friday 10/17/2013...it showed "shipped' on Tues....shipped on Thursday am .be here Friday. So call this number ASAP when you get a
tracking number to be safe....or you may not be around ...I'm in the middle of the Midwest for crying out loud....someplace like N.Y. city
may get the dang thing in a day.

I also got a FULL REFUND  on my "processing' order of #526x just now ...customer service went way beyond the call of duty
and physically 'pulled' my unit out of production I mean they chased someone down to do it.
....they could have taken the easy route and just said it was too late to change
but really went the extra mile ..I was very very impressed ..so that order is CANCELLED with full refund!

So they are really chugging thru stuff so if you plan to pull a unit ...be quick.....they probably will get everything out in 2 or 3 days
from what I can tell.......they should post a youtube video probably looks like the plane crash from 'Lost" in their shipping dept.

anyway.....again it would have  been easier to take the route of just telling me I was too late instead they stepped up and pulled
my after Oct 15th unit even thou they could have probably convinced me it was impossible to do so at that time as it was in processing
was actually what I expected...( I was just kinda going thru the motions)
they did so without fan fare and went the extra mile ..took them a day to chase it down with other units as well  I'd imagine
.what do they say ...see how people act when no one else is looking...well again
I was very impressed ....they really had to beat the clock on my part....

so you want one of your units pulled they will do so ASAP but again it looks to me like stuff is gonna get done with this batch soon
so you really have to contact customer service [email protected]  quickly.....once it is built the customer service folks
still may be able to go to bat for you but it is much harder...maybe impossible imho they have clout to pull maybe beyond that not sure
if it is built already..but i'd check ..they do have Nov stuff to ship they may not care and just hold it for the next merry go round next month

I will be ordering from KNC again ...but that Saturn with current situation after Oct 15th ...was just a bit too much for me at this time
..bumping against the new price of next month nov orders diff increases...seemed prudent to jump at this offer
and go with this tempting option to get a refund ..on the after Oct 15th units as per their promise of Oct 15th not being kept. (My other
order a Jupiter DID ship late Oct 15th)

Seems prudent to me at this time ..but again without customer service stepping up and going the extra mile it would not have been
impossible...they may not be perfect at KNC but they at least seem to make a valid attempt....intent and how you treat
your customers holds a lot of value to me after BFL.....screwing up is normal ...quickly trying to improve/change
especially under their timeline at this time and pressure at KNC is encouraging .if nothing else the customer service
people seem to be following the mantra of "We want repeat customers!) ..again I'm very impressed!

hopefully others of you with issues on your miners and/or want refunds on some units will have the same results but act quick I really
do think they are gonna get done with this batch real soon.....(a guess)

my 2c worth

Searing

full member
Activity: 204
Merit: 100
October 17, 2013, 12:17:46 PM
22°C, Case off and no direct house pointed. But temperature from the ASIC chip is at 31.0°C. I think this is okay.

Greetings

its not the chip that is under heat stress.

Its the components on the pcb.

The default cooling for each module is not acquitted to maintain an optimal operating temp of the components.

Just adding airflow on the pcb components will help with performance.

You can get more details on the first impressions thread.

That's strange. Because all components are in a cool temperature scale. They wouldn't get colder if I'd use external air flow. But I'll give it a try. Thanks for that Smiley
legendary
Activity: 1792
Merit: 1047
October 17, 2013, 12:12:59 PM
22°C, Case off and no direct house pointed. But temperature from the ASIC chip is at 31.0°C. I think this is okay.

Greetings

its not the chip that is under heat stress.

Its the components on the pcb.

The default cooling for each module is not acquitted to maintain an optimal operating temp of the components.

Just adding airflow on the pcb components will help with performance.

You can get more details on the first impressions thread.
hero member
Activity: 854
Merit: 500
October 17, 2013, 12:07:05 PM
36X Day 2 here just changed status to "Shipped" its a pickup so I guess they have to now ship it to their office where it can be picked up from as I imagine they don't want ppl having around the factory.

just a note my 304x unit just got the tracking number like 2hrs ago it is showing DHL tomorrow (Friday) i'd call if DHL and set things up at least they can give you the DAY it arrives from this number 1-800-225-5345 er again the tracking number shows Brussels calling the number and a live person told me it would arrive tomorrow ..(I was shocked) just so you are warned!

anyway the point of this is it took 2 1/2 days to go from Sweden to the Midwest usa...so jump on the DHL tracking when you get the number imho

Searing

My Mercury is, according to DHL, in Brussels since 1:44AM, processed in Brussels at 11:15AM.  Calling I found I can expect delivery tomorrow by end of the business day.

DHL instead of UPS, not sure if that's good or bad. Is your Mercury going to the USA? I can't imagine mine getting to me tomorrow from Brussels...

http://postimg.org/image/fblcmw481

My tracking screen is exactly the same. Same dates and times.
newbie
Activity: 19
Merit: 0
October 17, 2013, 12:02:48 PM
36X Day 2 here just changed status to "Shipped" its a pickup so I guess they have to now ship it to their office where it can be picked up from as I imagine they don't want ppl having around the factory.

just a note my 304x unit just got the tracking number like 2hrs ago it is showing DHL tomorrow (Friday) i'd call if DHL and set things up at least they can give you the DAY it arrives from this number 1-800-225-5345 er again the tracking number shows Brussels calling the number and a live person told me it would arrive tomorrow ..(I was shocked) just so you are warned!

anyway the point of this is it took 2 1/2 days to go from Sweden to the Midwest usa...so jump on the DHL tracking when you get the number imho

Searing

My Mercury is, according to DHL, in Brussels since 1:44AM, processed in Brussels at 11:15AM.  Calling I found I can expect delivery tomorrow by end of the business day.

DHL instead of UPS, not sure if that's good or bad. Is your Mercury going to the USA? I can't imagine mine getting to me tomorrow from Brussels...

http://postimg.org/image/fblcmw481
hero member
Activity: 798
Merit: 1000
October 17, 2013, 11:58:23 AM
Well, 455 boxes out of Huh? still in the queue  Roll Eyes

455/~1000
lol
350+455 =
805/~1000
donator
Activity: 1064
Merit: 1000
October 17, 2013, 11:54:43 AM
With FW 0.96 my numbers have gone from 520,525 and 540 to 450,500 and 520 Ghash. This is quite the decrease in performance.
I have been running them for about an hour so it might still be variance, anyone else getting similar results?
//DeaDTerra

are those numbers at the pool or reported back form cgminer ?

CgMiner
//DeaDTerra

thanks
anyway  FeedbackLoop could be right:

https://bitcointalksearch.org/topic/m.3356843

e.g. slush found 3 block in less than one hour
I got a hold of Marcus and told him about my numbers, I told him to not start investigating it yet and that I would get back to him in 24 hours with my new numbers as it is possible that it is due to the flushwork as you guys said.
//DeaDTerra

perfect! really appriciated, maybe the'll finally fix it.


I am sure they will if it proves to be something wrong, but there shouldn't be any performance issue according to Marcus.
//DeaDTerra
legendary
Activity: 1260
Merit: 1008
October 17, 2013, 11:53:10 AM
With FW 0.96 my numbers have gone from 520,525 and 540 to 450,500 and 520 Ghash. This is quite the decrease in performance.
I have been running them for about an hour so it might still be variance, anyone else getting similar results?
//DeaDTerra

are those numbers at the pool or reported back form cgminer ?

CgMiner
//DeaDTerra

thanks
anyway  FeedbackLoop could be right:

https://bitcointalksearch.org/topic/m.3356843

e.g. slush found 3 block in less than one hour
I got a hold of Marcus and told him about my numbers, I told him to not start investigating it yet and that I would get back to him in 24 hours with my new numbers as it is possible that it is due to the flushwork as you guys said.
//DeaDTerra

perfect! really appriciated, maybe the'll finally fix it.


edit1: since u have a direct way to contact Marcus would u mind to ask him what are the mining of the stickers they put on top os the PCBs (1,2,3,4,5) ? thanks
soy
legendary
Activity: 1428
Merit: 1013
October 17, 2013, 11:52:44 AM
Can confirm this. With 0.96 I'm "only" getting 107GH/s and with 0.95 it was an average of 115GH/s (Mercury).
Any idea to improve this? Think It could run at least 120 - 130GH/s?!

ty,
Silv0r

There was mention of grading numbers but I was unsure if it had to do with the power modules or the ASIC modules.  Has yours one of those stickers having a number 1 to 4?

There is a sticker with number 1 on it.

http://imgur.com/I2g2GHM

Silv0r

Okay, that's suppose to be best.  Glad they're putting 1's in Merc's.
donator
Activity: 1064
Merit: 1000
October 17, 2013, 11:51:47 AM
With FW 0.96 my numbers have gone from 520,525 and 540 to 450,500 and 520 Ghash. This is quite the decrease in performance.
I have been running them for about an hour so it might still be variance, anyone else getting similar results?
//DeaDTerra

are those numbers at the pool or reported back form cgminer ?

CgMiner
//DeaDTerra

thanks
anyway  FeedbackLoop could be right:

https://bitcointalksearch.org/topic/m.3356843

e.g. slush found 3 block in less than one hour
I got a hold of Marcus and told him about my numbers, I told him to not start investigating it yet and that I would get back to him in 24 hours with my new numbers as it is possible that it is due to the flushwork as you guys said.
//DeaDTerra
soy
legendary
Activity: 1428
Merit: 1013
October 17, 2013, 11:50:38 AM
36X Day 2 here just changed status to "Shipped" its a pickup so I guess they have to now ship it to their office where it can be picked up from as I imagine they don't want ppl having around the factory.

just a note my 304x unit just got the tracking number like 2hrs ago it is showing DHL tomorrow (Friday) i'd call if DHL and set things up at least they can give you the DAY it arrives from this number 1-800-225-5345 er again the tracking number shows Brussels calling the number and a live person told me it would arrive tomorrow ..(I was shocked) just so you are warned!

anyway the point of this is it took 2 1/2 days to go from Sweden to the Midwest usa...so jump on the DHL tracking when you get the number imho

Searing

My Mercury is, according to DHL, in Brussels since 1:44AM, processed in Brussels at 11:15AM.  Calling I found I can expect delivery tomorrow by end of the business day.
legendary
Activity: 1260
Merit: 1008
October 17, 2013, 11:48:43 AM
With FW 0.96 my numbers have gone from 520,525 and 540 to 450,500 and 520 Ghash. This is quite the decrease in performance.
I have been running them for about an hour so it might still be variance, anyone else getting similar results?
//DeaDTerra

are those numbers at the pool or reported back form cgminer ?

CgMiner
//DeaDTerra

thanks
anyway  FeedbackLoop could be right:

https://bitcointalksearch.org/topic/m.3356843

e.g. slush found 3 blocks in less than one hour
full member
Activity: 204
Merit: 100
October 17, 2013, 11:47:15 AM
Can confirm this. With 0.96 I'm "only" getting 107GH/s and with 0.95 it was an average of 115GH/s (Mercury).
Any idea to improve this? Think It could run at least 120 - 130GH/s?!

ty,
Silv0r

There was mention of grading numbers but I was unsure if it had to do with the power modules or the ASIC modules.  Has yours one of those stickers having a number 1 to 4?

There is a sticker with number 1 on it.

http://imgur.com/I2g2GHM

Silv0r
donator
Activity: 1064
Merit: 1000
October 17, 2013, 11:46:31 AM
With FW 0.96 my numbers have gone from 520,525 and 540 to 450,500 and 520 Ghash. This is quite the decrease in performance.
I have been running them for about an hour so it might still be variance, anyone else getting similar results?
//DeaDTerra

are those numbers at the pool or reported back form cgminer ?

CgMiner
//DeaDTerra
Jump to: