Topic: Swedish ASIC miner company kncminer.com - page 147. (Read 3049514 times)
Why should anyone sell a titan for 5% of it's price when you can get ROI in less than 2 months on the 500$. Customs probably cost him more than that.
The performance of the batch 1 Titan miners is 300+ MH/s while consuming approx. 1100 Watts.
The lies... can anyone confirm this ?
There is worse stuff then that going on at KNC they are shipping the bonus neptunes without a thermal pad on the asic and saying it don't matter and by the
by in that the bonus neptunes are 'free' (even thou for shipping they add a price) ....tough luck as is no warranty..don't let the door hit your ass on the way
out the door
http://forum.kncminer.com/forum/main-category/hardware/73325-manufacturing-fault-view-4?_=1425313042172
they are not even going thru the motions of customer service anymore (whats the point if they ever do ship the last of the titans they will never have any
more customers per say in an equipment manner..just investors) ...i suppose that is obvious in that the 2nd batch Titans from my figuring is now 3 months late
(I just picked up a 1st batch used titan all good dies with shipping from austalia for 2.15 btc (at the time came out to 505 usd even) and i'm not sure if that
was entirely wise at that price at 15c kwh)
just saying 'home mining is dead' and knc is first out the door before their house of cards falls down (sorry is falling down as we speak)
The performance of the batch 1 Titan miners is 300+ MH/s while consuming approx. 1100 Watts.
The lies... can anyone confirm this ?
Basically what happens is when you start it up, the flashing blue LED should start flashing in about 5 seconds or so after startup. But with this miner it doesnt. I need to shut it down, and start it back up a few times until those LED start flashing and then it works fine for days and days until it get shut down.
I am wondering if its the KNC Controller or the BeagleBone or something software related. It seems like a software issue to me.
Try it without power to the ASIC boards and see what happens.
You may have a power or ground issue.
I would guess it would be hardware. I have ran 8 of them, never had a problem.
did you try the firmware revision: 1.01.1-padrino
Yes that is the current version I have right now.
Basically what happens is when you start it up, the flashing blue LED should start flashing in about 5 seconds or so after startup. But with this miner it doesnt. I need to shut it down, and start it back up a few times until those LED start flashing and then it works fine for days and days until it get shut down.
I am wondering if its the KNC Controller or the BeagleBone or something software related. It seems like a software issue to me.
I will try to reflash the entire image. From the KNC website I downloaded a 2GB image so I think it will completely restore the entire operating system and everything.
Upgrading the firmware is only a 2MB file and doesn't change anything.
Upgrading the firmware is only a 2MB file and doesn't change anything.
did you try the firmware revision: 1.01.1-padrino
switch the beagle bone to a different unit(the top piece) I think I have an extra beagle bone, ill look. I do have 3 complete controler, but im not sure im ready to part with any. If I do, I would like to get rid of complete frankenjupiters
I cant find it, I dont know what I did with it
I cant find it, I dont know what I did with it
I will try to reflash the entire image. From the KNC website I downloaded a 2GB image so I think it will completely restore the entire operating system and everything.
Upgrading the firmware is only a 2MB file and doesn't change anything.
v1.01 and yes I tried reflashing 1.01 and it has the same issue.
switch the beagle bone to a different unit(the top piece) I think I have an extra beagle bone, ill look. I do have 3 complete controler, but im not sure im ready to part with any. If I do, I would like to get rid of complete frankenjupiters
I cant find it, I dont know what I did with it
Anyone got one of these KNC Jupiter which fails to start mining until restarting like 5 times.
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
Anyone got one of these KNC Jupiter which fails to start mining until restarting like 5 times.
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
What firmware you running, did you try to reflash?
v1.01 and yes I tried reflashing 1.01 and it has the same issue.
Anyone got one of these KNC Jupiter which fails to start mining until restarting like 5 times.
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
What firmware you running, did you try to reflash?
Anyone got one of these KNC Jupiter which fails to start mining until restarting like 5 times.
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
It works once it starts mining but if I turn it off and then start it back up, it needs multiple restarts to get going.
Any fix?
Made an account on KNCMiner Forums and its been almost a week and I still can't post because my account isn't approved or active yet.
Check this - http://forum.kncminer.com/activateuser , enter the username and the Activation ID from the registration email
You should receive this message "Your account has been activated but you are currently in the moderation queue to be added to the forum."
There's nothing else you can do besides waiting. idiots.
Doesn't work. It gives me an error and says invalid email.
I want to sell my bonus Neptune which should be sent out soon for $1000. Anyone interested?
including psu that's close to a brand new SP31 which does 4.9TH. And what you are selling is most probably very used.
There is no proof of that yet. My bonus miner is coming from the same place my original did in Sweden. And is the SP31 shipping right this moment or do you have to wait 5 months?
We'll see, I'm getting mine soon as well. Not sure if I want to order PSUs yet. Might wait and see if it's in pieces first. Spondoolies are selling SP31 from stock.
Made an account on KNCMiner Forums and its been almost a week and I still can't post because my account isn't approved or active yet.
Check this - http://forum.kncminer.com/activateuser , enter the username and the Activation ID from the registration email
You should receive this message "Your account has been activated but you are currently in the moderation queue to be added to the forum."
There's nothing else you can do besides waiting. idiots.
Made an account on KNCMiner Forums and its been almost a week and I still can't post because my account isn't approved or active yet.
I want to sell my bonus Neptune which should be sent out soon for $1000. Anyone interested?
including psu that's close to a brand new SP31 which does 4.9TH. And what you are selling is most probably very used.
There is no proof of that yet. My bonus miner is coming from the same place my original did in Sweden. And is the SP31 shipping right this moment or do you have to wait 5 months?
I want to sell my bonus Neptune which should be sent out soon for $1000. Anyone interested?
I'll offer you $29.99 for it!
I want to sell my bonus Neptune which should be sent out soon for $1000. Anyone interested?
including psu that's close to a brand new SP31 which does 4.9TH. And what you are selling is most probably very used.
Jump to: