Swedish ASIC miner company kncminer.com - page 733.

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: greenbtc on January 16, 2014, 03:33:28 PM

Quote from: Phoenix1969 on January 16, 2014, 03:26:17 PM

Quote from: greenbtc on January 16, 2014, 03:25:19 PM

Quote from: Phoenix1969 on January 16, 2014, 03:22:27 PM

Quote from: bobsag3 on January 16, 2014, 03:09:57 PM

Quote from: Phoenix1969 on January 16, 2014, 03:06:19 PM

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.

We have actual, 3 phase 240v service from our main panel here. ~1400A total capacity @ that voltage

actual 3 phase in usa homes is rare... congratz you must live "In town" eh?
They simply don't offer that here

More ignorance. Talk to your power company and they can probably pull 3 phase to your house (if you have commercial area for it on your property, there is no reason to have 3 phase at a house unless your draw is at least 20,000 KWH per month in my opinion.

I live off a state route in the middle of nowhere and my power company was able to get me 3 phase.

nope... 200a is max here, and I had to get a transformer installed to get it.
its not ignorance btw... its fact, and we are supposed to be having a conversation...right? Why do people have to get nasty while conversing?
ignorance? I think not. That's just how it is here.

You realize your first post to mine was full of the nastiness and showed you had no clue what you were talking about?

I'm assuming you haven't even really talked to your power company, but that was me just being high and mighty. I find it hard to believe you're capped at 200amps, but it certainly could be the case.

sure...I could get another, totally separate meter with another 200 amp 2-phase, that's it. There's no 3 phase here in FF, the nearest 3 phase is 25 miles away
i never called you ignorant... and never meant to be nasty okay? just a discussion... take it easy
.

greenbtc

full member

Activity: 210

Merit: 100

Quote from: Phoenix1969 on January 16, 2014, 03:32:36 PM

Quote from: soy on January 16, 2014, 03:27:33 PM

Quote from: greenbtc on January 16, 2014, 03:21:40 PM

Quote from: Micky25 on January 16, 2014, 03:18:18 PM

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin

Quote from: ?? on ??

on another note...
Good thing no miners here ATM...
My new 200 amp service line took a direct lightning strike last night Angry

It blew every breaker in the house, both live phases
It exploded a 20 amp power strip, blew my desktop, microwave, and left a
3 inch long exploded hole in the new conduit. It struck on the portion
of the line we had not been able to bury yet. The mains are literally in pieces.
After calling the power company, they come and find that my transformer is also blown.
They patched me into a local transformer down the street a bit, but only one phase
is still working with a huge exposed/blackened hole in the conduit for now until I
can fix this mess. oh boy.
So far I was able to get a set of dual 100amp switches for the mains and a
microwave oven (Gotta warm that coffee) to get going
Installing all new 2-2-2 in conduit is gonna be fun I have no way of
splicing the hit portion of the service line do I?

Pretty sure I don't need to say anymore...don't trust just anybody for electrical advice, especially on the internet. In fact, if you THINK you aren't SURE about something electrical, hire a contractor. Your wife will thank you when the insurance actually covers the fire rather than them blaming your own shoddy handiwork.

Guess you brow beat your customers into paying lots and lots of money. Shoddy? What give any indication the work was shoddy? Lightening will fry anything.

Yeah... guess the electric company was wrong saying my install was okay huh... lol shoddy hahaha okay...I'm done
rip me apart. lol fact is I don't care really, you can find your own way...call a contractor....his wire is better because it costs more, right? lol
That lightning got dozens of homes around here

I wire the majority of my own buildings unless I don't have time, but someone who doesn't know simple facts about 3 phase, 240v, and 120v--I would not trust near my breaker box personally. I was simply telling others if you aren't SURE, hire someone that IS.

greenbtc

full member

Activity: 210

Merit: 100

Quote from: Phoenix1969 on January 16, 2014, 03:26:17 PM

Quote from: greenbtc on January 16, 2014, 03:25:19 PM

Quote from: Phoenix1969 on January 16, 2014, 03:22:27 PM

Quote from: bobsag3 on January 16, 2014, 03:09:57 PM

Quote from: Phoenix1969 on January 16, 2014, 03:06:19 PM

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.

We have actual, 3 phase 240v service from our main panel here. ~1400A total capacity @ that voltage

actual 3 phase in usa homes is rare... congratz you must live "In town" eh?
They simply don't offer that here

More ignorance. Talk to your power company and they can probably pull 3 phase to your house (if you have commercial area for it on your property, there is no reason to have 3 phase at a house unless your draw is at least 20,000 KWH per month in my opinion.

I live off a state route in the middle of nowhere and my power company was able to get me 3 phase.

nope... 200a is max here, and I had to get a transformer installed to get it.
its not ignorance btw... its fact, and we are supposed to be having a conversation...right? Why do people have to get nasty while conversing?
ignorance? I think not. That's just how it is here.

You realize your first post to mine was full of the nastiness and showed you had no clue what you were talking about?

I'm assuming you haven't even really talked to your power company, but that was me just being high and mighty. I find it hard to believe you're capped at 200amps, but it certainly could be the case.

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: soy on January 16, 2014, 03:27:33 PM

Quote from: greenbtc on January 16, 2014, 03:21:40 PM

Quote from: Micky25 on January 16, 2014, 03:18:18 PM

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin

Quote from: ?? on ??

on another note...
Good thing no miners here ATM...
My new 200 amp service line took a direct lightning strike last night Angry

It blew every breaker in the house, both live phases
It exploded a 20 amp power strip, blew my desktop, microwave, and left a
3 inch long exploded hole in the new conduit. It struck on the portion
of the line we had not been able to bury yet. The mains are literally in pieces.
After calling the power company, they come and find that my transformer is also blown.
They patched me into a local transformer down the street a bit, but only one phase
is still working with a huge exposed/blackened hole in the conduit for now until I
can fix this mess. oh boy.
So far I was able to get a set of dual 100amp switches for the mains and a
microwave oven (Gotta warm that coffee) to get going
Installing all new 2-2-2 in conduit is gonna be fun I have no way of
splicing the hit portion of the service line do I?

Pretty sure I don't need to say anymore...don't trust just anybody for electrical advice, especially on the internet. In fact, if you THINK you aren't SURE about something electrical, hire a contractor. Your wife will thank you when the insurance actually covers the fire rather than them blaming your own shoddy handiwork.

Guess you brow beat your customers into paying lots and lots of money. Shoddy? What give any indication the work was shoddy? Lightening will fry anything.

Yeah... guess the electric company was wrong saying my install was okay huh... lol shoddy hahaha okay...I'm done
rip me apart. lol fact is I don't care really, you can find your own way...call a contractor....his wire is better because it costs more, right? lol
That lightning got dozens of homes around here

greenbtc

full member

Activity: 210

Merit: 100

Quote from: soy on January 16, 2014, 03:27:33 PM

Quote from: greenbtc on January 16, 2014, 03:21:40 PM

Quote from: Micky25 on January 16, 2014, 03:18:18 PM

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin

Quote from: ?? on ??

on another note...
Good thing no miners here ATM...
My new 200 amp service line took a direct lightning strike last night Angry

It blew every breaker in the house, both live phases
It exploded a 20 amp power strip, blew my desktop, microwave, and left a
3 inch long exploded hole in the new conduit. It struck on the portion
of the line we had not been able to bury yet. The mains are literally in pieces.
After calling the power company, they come and find that my transformer is also blown.
They patched me into a local transformer down the street a bit, but only one phase
is still working with a huge exposed/blackened hole in the conduit for now until I
can fix this mess. oh boy.
So far I was able to get a set of dual 100amp switches for the mains and a
microwave oven (Gotta warm that coffee) to get going
Installing all new 2-2-2 in conduit is gonna be fun I have no way of
splicing the hit portion of the service line do I?

Pretty sure I don't need to say anymore...don't trust just anybody for electrical advice, especially on the internet. In fact, if you THINK you aren't SURE about something electrical, hire a contractor. Your wife will thank you when the insurance actually covers the fire rather than them blaming your own shoddy handiwork.

Guess you brow beat your customers into paying lots and lots of money. Shoddy? What give any indication the work was shoddy?

Me? I'm not an electrician, and all I was doing was cautioning others on taking advice from someone who has no idea what they are talking about on the internet--especially electrical work.

soy

legendary

Activity: 1428

Merit: 1013

Quote from: greenbtc on January 16, 2014, 03:21:40 PM

Quote from: Micky25 on January 16, 2014, 03:18:18 PM

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin

Quote from: ?? on ??

on another note...
Good thing no miners here ATM...
My new 200 amp service line took a direct lightning strike last night Angry

It blew every breaker in the house, both live phases
It exploded a 20 amp power strip, blew my desktop, microwave, and left a
3 inch long exploded hole in the new conduit. It struck on the portion
of the line we had not been able to bury yet. The mains are literally in pieces.
After calling the power company, they come and find that my transformer is also blown.
They patched me into a local transformer down the street a bit, but only one phase
is still working with a huge exposed/blackened hole in the conduit for now until I
can fix this mess. oh boy.
So far I was able to get a set of dual 100amp switches for the mains and a
microwave oven (Gotta warm that coffee) to get going
Installing all new 2-2-2 in conduit is gonna be fun I have no way of
splicing the hit portion of the service line do I?

Pretty sure I don't need to say anymore...don't trust just anybody for electrical advice, especially on the internet. In fact, if you THINK you aren't SURE about something electrical, hire a contractor. Your wife will thank you when the insurance actually covers the fire rather than them blaming your own shoddy handiwork.

Guess you brow beat your customers into paying lots and lots of money. Shoddy? What give any indication the work was shoddy? Lightening will fry anything.

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: greenbtc on January 16, 2014, 03:25:19 PM

Quote from: Phoenix1969 on January 16, 2014, 03:22:27 PM

Quote from: bobsag3 on January 16, 2014, 03:09:57 PM

Quote from: Phoenix1969 on January 16, 2014, 03:06:19 PM

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.

We have actual, 3 phase 240v service from our main panel here. ~1400A total capacity @ that voltage

actual 3 phase in usa homes is rare... congratz you must live "In town" eh?
They simply don't offer that here

More ignorance. Talk to your power company and they can probably pull 3 phase to your house (if you have commercial area for it on your property, there is no reason to have 3 phase at a house unless your draw is at least 20,000 KWH per month in my opinion.

I live off a state route in the middle of nowhere and my power company was able to get me 3 phase.

nope... 200a is max here, and I had to get a transformer installed to get it.
its not ignorance btw... its fact, and we are supposed to be having a conversation...right? Why do people have to get nasty while conversing?
ignorance? I think not. That's just how it is here.

greenbtc

full member

Activity: 210

Merit: 100

Quote from: Phoenix1969 on January 16, 2014, 03:22:27 PM

Quote from: bobsag3 on January 16, 2014, 03:09:57 PM

Quote from: Phoenix1969 on January 16, 2014, 03:06:19 PM

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.

We have actual, 3 phase 240v service from our main panel here. ~1400A total capacity @ that voltage

actual 3 phase in usa homes is rare... congratz you must live "In town" eh?
They simply don't offer that here

More ignorance. Talk to your power company and they can probably pull 3 phase to your house (if you have commercial area for it on your property, there is no reason to have 3 phase at a house unless your draw is at least 20,000 KWH per month in my opinion--at which point you aren't really "living in the house").

I live off a state route in the middle of nowhere and my power company was able to get me 3 phase (at this point, you can pretty much get as many amps as you want at the location).

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: bobsag3 on January 16, 2014, 03:09:57 PM

Quote from: Phoenix1969 on January 16, 2014, 03:06:19 PM

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.

We have actual, 3 phase 240v service from our main panel here. ~1400A total capacity @ that voltage

actual 3 phase in usa homes is rare... congratz you must live "In town" eh?
They simply don't offer that here
but 1400 amps? in a house? huh? never heard of it. each phase is typically 100a
good luck

greenbtc

full member

Activity: 210

Merit: 100

Quote from: Micky25 on January 16, 2014, 03:18:18 PM

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin

Quote from: ?? on ??

on another note...
Good thing no miners here ATM...
My new 200 amp service line took a direct lightning strike last night Angry

It blew every breaker in the house, both live phases
It exploded a 20 amp power strip, blew my desktop, microwave, and left a
3 inch long exploded hole in the new conduit. It struck on the portion
of the line we had not been able to bury yet. The mains are literally in pieces.
After calling the power company, they come and find that my transformer is also blown.
They patched me into a local transformer down the street a bit, but only one phase
is still working with a huge exposed/blackened hole in the conduit for now until I
can fix this mess. oh boy.
So far I was able to get a set of dual 100amp switches for the mains and a
microwave oven (Gotta warm that coffee) to get going
Installing all new 2-2-2 in conduit is gonna be fun I have no way of
splicing the hit portion of the service line do I?

Pretty sure I don't need to say anymore...don't trust just anybody for electrical advice, especially on the internet. In fact, if you THINK you aren't SURE about something electrical, hire a contractor. Your wife will thank you when the insurance actually covers the fire rather than them blaming your own shoddy handiwork.

Micky25

legendary

Activity: 974

Merit: 1000

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin

Quote from: ?? on ??

on another note...
Good thing no miners here ATM...
My new 200 amp service line took a direct lightning strike last night Angry

It blew every breaker in the house, both live phases
It exploded a 20 amp power strip, blew my desktop, microwave, and left a
3 inch long exploded hole in the new conduit. It struck on the portion
of the line we had not been able to bury yet. The mains are literally in pieces.
After calling the power company, they come and find that my transformer is also blown.
They patched me into a local transformer down the street a bit, but only one phase
is still working with a huge exposed/blackened hole in the conduit for now until I
can fix this mess. oh boy.
So far I was able to get a set of dual 100amp switches for the mains and a
microwave oven (Gotta warm that coffee) to get going
Installing all new 2-2-2 in conduit is gonna be fun I have no way of
splicing the hit portion of the service line do I?

soy

legendary

Activity: 1428

Merit: 1013

Quote from: greenbtc on January 16, 2014, 02:29:52 PM

Quote from: Phoenix1969 on January 16, 2014, 11:52:28 AM

Quote from: Ytterbium on January 16, 2014, 11:41:48 AM

Quote from: soy on January 15, 2014, 03:20:34 PM

Quote from: r1senfa17h on January 15, 2014, 03:13:39 PM

I'm wiring my house with 6 x 30-amp 240v circuits to handle my mining equipment. I'm more worried about cooling to be honest Wink

Yes, I think the low end, efficient, window AC by Haier got bumped by $30-$50 after the summer. Went looking the other day.

30 amps at 240v is 7kW. Six of them would be 43kW. That's 40 btu per second - or 146,722 btu per hour.

A 'low end' window AC isn't going to do much.

You just need a lot of ventilation - replace hot air with air from outside, as long as it's less then 70C outside you'll be fine.

well, I hope the Neptunes are 220 for your sake.... lol bold...doing that without knowing...

It's not bold at all. Almost everything that runs off 110 will run off 220 or 240v with the correct PSU. He's smart, as 220-240v is more efficient and he will be able to handle more Neptunes. You obviously don't have a firm grip on household electricity yet.

If the Neptunes are 220-240vac, he's okay. If they run at 115vac they'll draw twice the current each. If he has power into a room that via 12-3, it can be broken down into 115vac outlets some with L1 as hot and some as L2 as hot but the return on the 12-3 has a single neutral. If Neptunes are to be run at 115vac (unlikely but possible) he could put 2 in series in a McGiver sort of arrangement. That would keep the current down.

Oh and one would not plan to run 12-3 or 10-3 to be split into 115vac outlets.

And sorry Phoenix, I think two 115vac do not add up to 230vac. Although only 2 phases come into a home they are generated in 3 phases I think. They do not add up as 1 + 1 = 2.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: Phoenix1969 on January 16, 2014, 03:06:19 PM

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.

We have actual, 3 phase 240v service from our main panel here. ~1400A total capacity @ that voltage

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

if you think you have actual 220 running into your home... guess what... lol you actually have two 110 lines which are combined to make the 220. The psu's mostly can handle either, yes, and 220 is more efficient in general... but what most don't realize is that your amp rating install is the limit. You get 100 or 200 amp service usually...just because you install 220v circuits, means nothing towards running more neptunes. But ok...I don't know what I'm talking about.... lol.. believe what you want. I have too many installs under my belt to buy that load of crap.
200 amp service with 220 means you have two lines of 110 @ 100amp each. that's it. Running a psu at 220v doesn't change the amount of power ran to your home. lol
2 hots, 1 neutral, 1 gnd

vesperwillow

hero member

Activity: 616

Merit: 500

IIRC in the US it goes from 3 phase to a transformer which breaks it out to 3 or 5 poles, heck I forget. Anyhow from there you get your 240 which is split to 220/110 or whatnot.

edit, looks like someone beat me to it.

greenbtc

full member

Activity: 210

Merit: 100

Quote from: bobsag3 on January 16, 2014, 03:01:00 PM

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

Quote from: greenbtc on January 16, 2014, 02:29:52 PM

Quote from: Phoenix1969 on January 16, 2014, 11:52:28 AM

Quote from: Ytterbium on January 16, 2014, 11:41:48 AM

Quote from: soy on January 15, 2014, 03:20:34 PM

Quote from: r1senfa17h on January 15, 2014, 03:13:39 PM

I'm wiring my house with 6 x 30-amp 240v circuits to handle my mining equipment. I'm more worried about cooling to be honest Wink

Yes, I think the low end, efficient, window AC by Haier got bumped by $30-$50 after the summer. Went looking the other day.

30 amps at 240v is 7kW. Six of them would be 43kW. That's 40 btu per second - or 146,722 btu per hour.

A 'low end' window AC isn't going to do much.

You just need a lot of ventilation - replace hot air with air from outside, as long as it's less then 70C outside you'll be fine.

well, I hope the Neptunes are 220 for your sake.... lol bold...doing that without knowing...

It's not bold at all. Almost everything that runs off 110 will run off 220 or 240v with the correct PSU. He's smart, as 220-240v is more efficient and he will be able to handle more Neptunes. You obviously don't have a firm grip on household electricity yet.

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin
110 combined to 220, then to the psu... then back down to dc... more conversion = more waste.
Europeans are lucky in that area

Um.
No? 220 is more efficient.. period.

Bob, he obviously has no clue what he is talking about. 3 phase > 240 v > 120v --anyone with a brain and has worked with electricity for more than a day knows this.

bobsag3

hero member

Activity: 546

Merit: 500

Owner, Minersource.net

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

Quote from: greenbtc on January 16, 2014, 02:29:52 PM

Quote from: Phoenix1969 on January 16, 2014, 11:52:28 AM

Quote from: Ytterbium on January 16, 2014, 11:41:48 AM

Quote from: soy on January 15, 2014, 03:20:34 PM

Quote from: r1senfa17h on January 15, 2014, 03:13:39 PM

I'm wiring my house with 6 x 30-amp 240v circuits to handle my mining equipment. I'm more worried about cooling to be honest Wink

Yes, I think the low end, efficient, window AC by Haier got bumped by $30-$50 after the summer. Went looking the other day.

30 amps at 240v is 7kW. Six of them would be 43kW. That's 40 btu per second - or 146,722 btu per hour.

A 'low end' window AC isn't going to do much.

You just need a lot of ventilation - replace hot air with air from outside, as long as it's less then 70C outside you'll be fine.

well, I hope the Neptunes are 220 for your sake.... lol bold...doing that without knowing...

It's not bold at all. Almost everything that runs off 110 will run off 220 or 240v with the correct PSU. He's smart, as 220-240v is more efficient and he will be able to handle more Neptunes. You obviously don't have a firm grip on household electricity yet.

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin
110 combined to 220, then to the psu... then back down to dc... more conversion = more waste.
Europeans are lucky in that area

Um.
No? 220 is more efficient.. period.

"As for efficiency, 220V takes the cake. P=V*I and Ploss=I^2*R. For a particular appliance (say a computer) that uses a fixed amount of power the 120V country will use approx. 2X the current from the 220V country - for the same total power. What changes is the power lost - the power lost through the wire is proportional to current only, not voltage. Therefore the higher the voltage the more efficient the transmission is. Instead of taking the extra efficiency, 220V circuits tend to use smaller wire (thus saving copper/raw material instead)."

greenbtc

full member

Activity: 210

Merit: 100

Quote from: Phoenix1969 on January 16, 2014, 02:51:20 PM

Quote from: greenbtc on January 16, 2014, 02:29:52 PM

Quote from: Phoenix1969 on January 16, 2014, 11:52:28 AM

Quote from: Ytterbium on January 16, 2014, 11:41:48 AM

Quote from: soy on January 15, 2014, 03:20:34 PM

Quote from: r1senfa17h on January 15, 2014, 03:13:39 PM

I'm wiring my house with 6 x 30-amp 240v circuits to handle my mining equipment. I'm more worried about cooling to be honest Wink

Yes, I think the low end, efficient, window AC by Haier got bumped by $30-$50 after the summer. Went looking the other day.

30 amps at 240v is 7kW. Six of them would be 43kW. That's 40 btu per second - or 146,722 btu per hour.

A 'low end' window AC isn't going to do much.

You just need a lot of ventilation - replace hot air with air from outside, as long as it's less then 70C outside you'll be fine.

well, I hope the Neptunes are 220 for your sake.... lol bold...doing that without knowing...

It's not bold at all. Almost everything that runs off 110 will run off 220 or 240v with the correct PSU. He's smart, as 220-240v is more efficient and he will be able to handle more Neptunes. You obviously don't have a firm grip on household electricity yet.

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin
110 combined to 220, then to the psu... then back down to dc... more conversion = more waste.
Europeans are lucky in that area

No offense, but you have no clue what you are talking about. Yes, two 120 pulls are combined for 240v in America. I am in America. I said if you have a proper PSU, anything will work on 220-240V, and my statement stands. You obviously have no clue what you are talking about. I feel bad for whomever let you work on their house. I constantly take switching ballasts and PSUs from a 110v socket to a 240v scoket with zero issues. I do it with Jupiters. 4 GPU rigs. 1000w ballasts. You name it.

A little warning to others: don't take electrical advice from that guy, apparently the internet has made us all professional electricians!

Phoenix1969

legendary

Activity: 938

Merit: 1000

LIR DEV

Quote from: greenbtc on January 16, 2014, 02:29:52 PM

Quote from: Phoenix1969 on January 16, 2014, 11:52:28 AM

Quote from: Ytterbium on January 16, 2014, 11:41:48 AM

Quote from: soy on January 15, 2014, 03:20:34 PM

Quote from: r1senfa17h on January 15, 2014, 03:13:39 PM

I'm wiring my house with 6 x 30-amp 240v circuits to handle my mining equipment. I'm more worried about cooling to be honest Wink

Yes, I think the low end, efficient, window AC by Haier got bumped by $30-$50 after the summer. Went looking the other day.

30 amps at 240v is 7kW. Six of them would be 43kW. That's 40 btu per second - or 146,722 btu per hour.

A 'low end' window AC isn't going to do much.

You just need a lot of ventilation - replace hot air with air from outside, as long as it's less then 70C outside you'll be fine.

well, I hope the Neptunes are 220 for your sake.... lol bold...doing that without knowing...

It's not bold at all. Almost everything that runs off 110 will run off 220 or 240v with the correct PSU. He's smart, as 220-240v is more efficient and he will be able to handle more Neptunes. You obviously don't have a firm grip on household electricity yet.

hahahaha.. really? guess you don't know that two 110 lines make 220 in america.... don't have a grasp eh? You know I wired my house...right? the neighbors house... and a few others... all of which passed inspection by the county 1st time round. Not to mention the commercial installs. I frequently worked under a licenced Electrical contractor, and he will sign anything i do
Just sayin
110 combined to 220, then to the psu... then back down to dc... more conversion = more waste.
He will be able to run more neptunes, because he installed more circuits... weather you have 100 amp or 200 amp service will determine the amount you can run, period.
Europeans are lucky in that area

mikep2012

sr. member

Activity: 362

Merit: 250

Quote from: vesperwillow on January 16, 2014, 02:32:17 PM

Where are you getting your power specs to see that they're 3x more efficient than a Neptune? or did I mis-read you.

he was comparing antminer vs avalon2

Topic: Swedish ASIC miner company kncminer.com - page 733. (Read 3050080 times)