One can never have too many laughs 
(P.S. Your KFC Titan is brilliant, the Colonel would be proud
)HAHAHA!!! Thats too funny =P
Topic: Swedish ASIC miner company kncminer.com - page 83. (Read 3049528 times)
(P.S. Your KFC Titan is brilliant, the Colonel would be proud
)HAHAHA!!! Thats too funny =P
One can never have too many laughs
(P.S. Your KFC Titan is brilliant, the Colonel would be proud
) I got a good laugh , but seriously, can someone with graphic skills produce something professional?
One can never have too many laughs 
( SVG available )
For all the slagging that KNC have got over the titan (and I have done some of it), it's been by a long way the most profitable of all the machines I have bought off them
So here is something not seen in this thread for a long time ...... "Thank you KNC"
So here is something not seen in this thread for a long time ...... "Thank you KNC"
Yes and me too after hundreds of hours of research , and testing to "finish their work". AFTER they are modded , they work flawlessly , without problems, as long as you want to run them.
Vegas
For all the slagging that KNC have got over the titan (and I have done some of it), it's been by a long way the most profitable of all the machines I have bought off them
So here is something not seen in this thread for a long time ...... "Thank you KNC"
So here is something not seen in this thread for a long time ...... "Thank you KNC"
Ok im SURE one of you guys are pro at Graphics. I got a good laugh , but seriously, can someone with graphic skills produce something professional?
Vegas
Vegas
LOL! =P
Looking good! 
Of course, it needs a bit of the old kfc blue
(P.S. On your image, I'd put something like "Build" or "Mods by GenTarkin", otherwise it looks like you are the manufacturer and I'm sure you don't want your good name associated with such poor quality hardware
) Does anybody have a list of replacement parts for titty? Specifically the white pci-e power intake.
Serial numbers / vendors.
This looks right, yeah? Will that pop out and in without soldering?
Serial numbers / vendors.
This looks right, yeah? Will that pop out and in without soldering?
this is the part http://www.mouser.com/ProductDetail/Molex/26-01-3116/?qs=%2fha2pyFaduj%2fyA0urf634zEGElEXdNk8JQBfwvY3IE4C75xslpo1DQ%3d%3d
it needs to be soldered, knc uses some nasty no lead solder, very difficult to desolder -- first I cut the pcie connector off so only the pins left, then I had to hit it with hot air AND a soldering iron and pull the pins out one at a time with tweezers.
btw, I just brought 2 dead cubes back by replacing the big electrolytic capacitor next to the pcie connector, this is relatively easy compared to replacing the pcie, however you still have that nasty solder to deal with -- either one will probably be a relatively cheap and easy repair at any electronics repair shop
if the fan runs but cube is dead or flaky, it is probably a bad electrolytic capacitor -- these caps go bad all the time and are a common failure point in many electronic gadgets (google it
) especially after power failure, surge, burnt pcie, y connector, or power cablehttp://www.amazon.com/gp/product/B004O21PPE?psc=1&redirect=true&ref_=oh_aui_detailpage_o02_s00
Does anybody have a list of replacement parts for titty? Specifically the white pci-e power intake.
Serial numbers / vendors.
This looks right, yeah? Will that pop out and in without soldering?
Serial numbers / vendors.
This looks right, yeah? Will that pop out and in without soldering?
In testing:
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Is the webGUI running on an http server? Can it render PHP files? If so, I can make a quick API in PHP and that would open up the firmware to be controlled through a mobile app.
No, PHP is not installed, its just a barebones lighttpd service that handles the webgui.
If it's lighttpd than yeah you can run PHP through CGI, you just have to include it in the conf.
My problem was described at May the 9th here it is
Please help me finding the clue of it. It makes me crasy!
Quote
...
I'm getting crazy because I am trying to upgrade, but after I upload the 2.0 and reboot, it start rebooting but then freeze in the screen at kncminer spinux. And don't move. So I flashed back to 1.02 and it works. When I try to upgrade in whatever version (even the 1.15) it freezes.
I'm getting crazy because I am trying to upgrade, but after I upload the 2.0 and reboot, it start rebooting but then freeze in the screen at kncminer spinux. And don't move. So I flashed back to 1.02 and it works. When I try to upgrade in whatever version (even the 1.15) it freezes.
Please help me finding the clue of it. It makes me crasy!
Some things you can try:
Try a different flash disc
Start with ONLY 1 cube and see if it boots
Let me know from there.
Vegas
OK I've got class 10 micro sd
flashed 2.00 img and it showed KNcminer / spimux
Then flashed 1.02 bin and all ASICS went online
Than made incremental upgrades one by one till 1.97 (I do not actually know if i need to make all upgrades one by one have no info), after it I had 1.25 working asics..
here check this screens
http://static2.keep4u.ru/2015/08/26/asics2.th.png
http://static1.keep4u.ru/2015/08/26/asics.th.png
this was on 1.97 and it is afted downgrade to 1.15
Do you know if the GenTarkin firmware can help??
Should be biger and centered
thoughts? LOL =P
there is anyone on europe repair cubes or neptunes?
KNC itself :PPP
mainly they took my cubes for RMA but lost my controller.
now i dont know what to do.
Guys we are looking for someone that can help with graphics. We want to remove the KNCminer logo as we do not want to be associated with them in any way. If any of you have graphic skills can you make a nice logo that has the same dark blue color as the Kncminer logo, except it will just say "Titan Miner". This will be used in the Titan Gui. Make it nice and fancy as you can. Be original, and please submit your work here on this thread. Also we need some help with our new OP. Can someone create a nice looking op with our current information compiled and post the code here, so we can create a new professional looking OP?
Thank you
Vegas
Thank you
Vegas
You are welcome
LOL! =P
UPDATE:
If anyone wants to try, Ive decided to release the STOCK v2.00 -> v.98 upgrade file.
It can be found here:
https://github.com/GenTarkin/Titan/releases/download/v.98/upgradetitan_v98_don.bin
If your already on v.98 release, dont use this upgrade file. This is for previous releases of mine or STOCK KNC Firmware.
Install via webgui -> SYSTEM -> UPGRADE.
If anyone wants to try, Ive decided to release the STOCK v2.00 -> v.98 upgrade file.
It can be found here:
https://github.com/GenTarkin/Titan/releases/download/v.98/upgradetitan_v98_don.bin
If your already on v.98 release, dont use this upgrade file. This is for previous releases of mine or STOCK KNC Firmware.
Install via webgui -> SYSTEM -> UPGRADE.
In testing:
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Is the webGUI running on an http server? Can it render PHP files? If so, I can make a quick API in PHP and that would open up the firmware to be controlled through a mobile app.
this would be a great feature also like to open up the miner API to allow BFG miner stats into a managment program I use to monitor up time and stats on all my miners from a dashboard alos allows faster on the fly pool changes
This would be easy if it was on ur local network, I could change the bfgminer start config in its service.... but if u needed custom ip's / networks .. that would have to be inputted somewhere. Not sure of a best way to do that for now =/ Maybe down the road =)
In testing:
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Is the webGUI running on an http server? Can it render PHP files? If so, I can make a quick API in PHP and that would open up the firmware to be controlled through a mobile app.
No, PHP is not installed, its just a barebones lighttpd service that handles the webgui.
there is anyone on europe repair cubes or neptunes?
In testing:
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Direct upgrade from STOCK KNC firmware 2.00 to my firmware!!!! ... so far, in practice its been working =)
Will post .bin v.98 build to github later on.
No more need to flash .img files =)
This will keep all ur current settings as well =)
Is the webGUI running on an http server? Can it render PHP files? If so, I can make a quick API in PHP and that would open up the firmware to be controlled through a mobile app.
this would be a great feature also like to open up the miner API to allow BFG miner stats into a managment program I use to monitor up time and stats on all my miners from a dashboard alos allows faster on the fly pool changes
Jump to: