Hi all,
The october batch of Jupiters have problems with some Corsair PSU.
Anyone knows if this is also valid for the november batch?
Thank you.
Topic: Swedish ASIC miner company kncminer.com - page 902. (Read 3050071 times)
ok understand thanks
No, but I did find with my 4 VRM one that putting the volts up too much turned the core off like your Die 2 is showing.
Is that what your trying to do? Get Die 2 up and running?
Hmm, I'd reset it all to default, what are your individual die voltages at default? Mine are -0.1121V on all dies. You can get it back to defaults by hitting "Reset to Factory Defaults"
Then just increase ASIC1 - Die2 by 0.01V increments till you get to 0 leaving it for a few minutes at a time. I didn't have a completely dead die, well I didn't when I started, but I stopped a few dies by overvolting them, but got them back by putting it back to defaults and being more cautious.
It takes time, I had putty open in the screen session watching for cores disabling and bertmod in one browser to confirm what die the core disabled, then I would tweak the voltage on that die little bit by little bit until it came back on again. Then the waiting game for more dies to turn off, etc etc.
Similar patience is needed when overclocking CPU/GPU/Memory for benchmarking. A PITA to do while its happening, but very satisfying when you get it working.
Of course you may just have a terminally faulty module, which you will have to RMA
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
1. You have it the wrong way round, the $13K price is the retail price it was always going to be.
2. The $10K price was a discounted price for previous customers, any previous customer of Batch 1 or Batch 2 devices.
+1 well said!
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
1. You have it the wrong way round, the $13K price is the retail price it was always going to be.
2. The $10K price was a discounted price for previous customers, any previous customer of Batch 1 or Batch 2 devices.
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
yeah i don't think you understand what I'm saying.
wht special ? all members buy one miner
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
receive email for buy batch#1
if you say only who bought pre orders first time and they pay more 500 bucks this is correct yes these are special
why price incresed? nonsence
this version comes with psu maybe
this version comes with psu maybe
the price increased as the 10k machines were a special for customers who believed in them before they even shipped a product, this is not "nonsense"
was someone able to to tune a 8vrm module? it just won't work! tried spi 3.2 and them from down to up, tried default with voltage up and nothing. 
tried spi 3.2 and them from down to up, tried default with voltage up and nothing. 
No, but I did find with my 4 VRM one that putting the volts up too much turned the core off like your Die 2 is showing.
Is that what your trying to do? Get Die 2 up and running?
why price incresed? nonsence
this version comes with psu maybe
this version comes with psu maybe
ridiculous. The price went up on it for $3,000. All because my bank wouldn't do my transfer on Thanksgiving. Horseshit.
thats a pretty shitty bank!!!
ridiculous. The price went up on it for $3,000. All because my bank wouldn't do my transfer on Thanksgiving. Horseshit.
What news we have about November shipping?
was someone able to to tune a 8vrm module? it just won't work! tried spi 3.2 and them from down to up, tried default with voltage up and nothing.
tried spi 3.2 and them from down to up, tried default with voltage up and nothing. No, but I did find with my 4 VRM one that putting the volts up too much turned the core off like your Die 2 is showing.
Is that what your trying to do? Get Die 2 up and running?
was someone able to to tune a 8vrm module? it just won't work! tried spi 3.2 and them from down to up, tried default with voltage up and nothing.
tried spi 3.2 and them from down to up, tried default with voltage up and nothing. 
https://www.kncminer.com/?resellerid=277
Here my reseller id, when we have 10 neptunes you will get for each machine you order 10% shareholding on
ghash.io https://cex.io/r/0/fubly/0/ account of the benefit machine.
If you have no account or pool on https://cex.io/r/0/fubly/0/ open one there.
All we need is an feedback that you ordered on there with your order no, so that I can check it on the
reseller portal of KNC which will come soon (told me carl from knc)
Here my reseller id, when we have 10 neptunes you will get for each machine you order 10% shareholding on
ghash.io https://cex.io/r/0/fubly/0/ account of the benefit machine.
If you have no account or pool on https://cex.io/r/0/fubly/0/ open one there.
All we need is an feedback that you ordered on there with your order no, so that I can check it on the
reseller portal of KNC which will come soon (told me carl from knc)
Jeez here we go, fubly you realise there is a Marketplace in these forums right?
Sorry me please, but thank you for the link.
My first visit here was before a view weeks.
https://www.kncminer.com/?resellerid=277
Here my reseller id, when we have 10 neptunes you will get for each machine you order 10% shareholding on
ghash.io https://cex.io/r/0/fubly/0/ account of the benefit machine.
If you have no account or pool on https://cex.io/r/0/fubly/0/ open one there.
All we need is an feedback that you ordered on there with your order no, so that I can check it on the
reseller portal of KNC which will come soon (told me carl from knc)
Here my reseller id, when we have 10 neptunes you will get for each machine you order 10% shareholding on
ghash.io https://cex.io/r/0/fubly/0/ account of the benefit machine.
If you have no account or pool on https://cex.io/r/0/fubly/0/ open one there.
All we need is an feedback that you ordered on there with your order no, so that I can check it on the
reseller portal of KNC which will come soon (told me carl from knc)
Jeez here we go, fubly you realise there is a Marketplace in these forums right?
So, can someone explain to me how the tuning suite works? I am literally just guessing at what I am doing....although my Sat. now Jupiter has been hashing at a decent rate, apparently after having tweaked it slightly where I think it needed tweaking....it now seems to have a steadier and slightly higher hashing rate. But some guidance or explanation of what things do and the danger zones would be nice...my 2 satoshis....
SPI Voltate is for the communication chanel I believe.
Underneath that for each asic and for each die you can change the voltage:
0V = no change from the original value.
+value = you increase the voltage from original value
-value = you decrease the voltage from original value
My personal experience is: increasing the PSI voltage to is max settings at 3.3V and then for each die with problems increase its voltage substantially and if it helps then decrease it in small increment to find its lowest possible stable value.
I will have to see if this works with batch 1 miners.
Works with mine, but I am perplexed by the lack of remedial maths skills, I must have been asked about a dozen times WRT to this.
Just so everyone is clear, if the starting voltage is a negative number, moving it closer to zero INCREASES the voltage.
So, can someone explain to me how the tuning suite works? I am literally just guessing at what I am doing....although my Sat. now Jupiter has been hashing at a decent rate, apparently after having tweaked it slightly where I think it needed tweaking....it now seems to have a steadier and slightly higher hashing rate. But some guidance or explanation of what things do and the danger zones would be nice...my 2 satoshis....
SPI Voltate is for the communication chanel I believe.
Underneath that for each asic and for each die you can change the voltage:
0V = no change from the original value.
+value = you increase the voltage from original value
-value = you decrease the voltage from original value
My personal experience is: increasing the PSI voltage to is max settings at 3.3V and then for each die with problems increase its voltage substantially and if it helps then decrease it in small increment to find its lowest possible stable value.
I will have to see if this works with batch 1 miners.
New Batch out, 4 seats left for extra 280GH Shares for FREE!
Link in sig
Link in sig
Jump to: