jesus you bought 3?!? holy cow. lol
you can go here and check the order list as well, maybe add your own like last time....
https://bitcointalksearch.org/topic/knc-miner-list-of-orders-neptune-348957
Topic: Swedish ASIC miner company kncminer.com - page 931. (Read 3050071 times)
ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
Hehe... yeah, I had the computer volume on FULL (connected to an 80 watt surround sound) the Page monitor set to watch the order page.... when it chimed, I woke the whole forest...lol, but did indeed spring out of bed(4am) and go DIRECTLY to purchasing, WITHOUT even reading the specs!...... glad I did... 
hahah i think you are the first person to order honestly....what is your order number anyway?
1213x ... 1254x11084, 12131, 12544. Did I guess right?
no comment
ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
Hehe... yeah, I had the computer volume on FULL (connected to an 80 watt surround sound) the Page monitor set to watch the order page.... when it chimed, I woke the whole forest...lol, but did indeed spring out of bed(4am) and go DIRECTLY to purchasing, WITHOUT even reading the specs!...... glad I did... hahah i think you are the first person to order honestly....what is your order number anyway?
1213x ... 1254x11084, 12131, 12544. Did I guess right?
i think im seeing in the 128xx area now.... pretty damn high!
yep day 1 for sure!
yep day 1 for sure!
haha holy crap, im like 10 units behind you....
day 1 for sure...hehebtx....what is latest posted order num?
haha holy crap, im like 10 units behind you....
btw....what is latest posted order num?
probably doesn't matter....maybe a few thousand unpaid hopefulls.... lol
haha holy crap, im like 10 units behind you....
ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
Hehe... yeah, I had the computer volume on FULL (connected to an 80 watt surround sound) the Page monitor set to watch the order page.... when it chimed, I woke the whole forest...lol, but did indeed spring out of bed(4am) and go DIRECTLY to purchasing, WITHOUT even reading the specs!...... glad I did... hahah i think you are the first person to order honestly....what is your order number anyway?
1213x ... 1254x ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
Hehe... yeah, I had the computer volume on FULL (connected to an 80 watt surround sound) the Page monitor set to watch the order page.... when it chimed, I woke the whole forest...lol, but did indeed spring out of bed(4am) and go DIRECTLY to purchasing, WITHOUT even reading the specs!...... glad I did... hahah i think you are the first person to order honestly....what is your order number anyway?
ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
Hehe... yeah, I had the computer volume on FULL (connected to an 80 watt surround sound) the Page monitor set to watch the order page.... when it chimed, I woke the whole forest...lol, but did indeed spring out of bed(4am) and go DIRECTLY to purchasing, WITHOUT even reading the specs!...... glad I did... 
ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
ok my #1109x order is paid! finally. i think Phoenix is the only guy i know with an order number earlier than mine!
help help help
my miner run perfcet
and when i do restart cgminer
does not now run?
Hard reset and flash back to the firmware you were using previously. my miner run perfcet
and when i do restart cgminer
does not now run?
Thanks to the new tuning suite, I've been able to resurrect 2 of my 4 dead dies... for a couple minutes at a time before they die again. One of them actually works better when I lower the die's voltage to the minimum -0.1465v. The bigger problem, however, is that even when the previously dead dies are online and hashing, I don't believe they're producing usable shares. My hardware errors spike and, more importantly, my WU (work utility) does not increase (stays around 10k for 6 modules with 20-22 working dies out of 24).
I guess I'm still going to have to RMA my newly purchased modules :-(
I guess I'm still going to have to RMA my newly purchased modules :-(
Is a dead die reading like the pic in my previous post? Just doesn't get the proper current and power flowing to it?
I haven't. How do I go about doing that? Just disconnect the fan? Or is there something more technical involved?
I don't experiment much. I'm a chicken.
Thanks to the new tuning suite, I've been able to resurrect 2 of my 4 dead dies... for a couple minutes at a time before they die again. One of them actually works better when I lower the die's voltage to the minimum -0.1465v. The bigger problem, however, is that even when the previously dead dies are online and hashing, I don't believe they're producing usable shares. My hardware errors spike and, more importantly, my WU (work utility) does not increase (stays around 10k for 6 modules with 20-22 working dies out of 24).
I guess I'm still going to have to RMA my newly purchased modules :-(
I guess I'm still going to have to RMA my newly purchased modules :-(
Is a dead die reading like the pic in my previous post? Just doesn't get the proper current and power flowing to it?
Thanks to the new tuning suite, I've been able to resurrect 2 of my 4 dead dies... for a couple minutes at a time before they die again. One of them actually works better when I lower the die's voltage to the minimum -0.1465v. The bigger problem, however, is that even when the previously dead dies are online and hashing, I don't believe they're producing usable shares. My hardware errors spike and, more importantly, my WU (work utility) does not increase (stays around 10k for 6 modules with 20-22 working dies out of 24).
I guess I'm still going to have to RMA my newly purchased modules :-(
I guess I'm still going to have to RMA my newly purchased modules :-(
Is a dead die reading like the pic in my previous post? Just doesn't get the proper current and power flowing to it?
help help help
my miner run perfcet
and when i do restart cgminer
does not now run?
Restart your modem find the ip new end my miner run perfcet
and when i do restart cgminer
does not now run?
Thanks to the new tuning suite, I've been able to resurrect 2 of my 4 dead dies... for a couple minutes at a time before they die again. One of them actually works better when I lower the die's voltage to the minimum -0.1465v. The bigger problem, however, is that even when the previously dead dies are online and hashing, I don't believe they're producing usable shares. My hardware errors spike and, more importantly, my WU (work utility) does not increase (stays around 10k for 6 modules with 20-22 working dies out of 24).
I guess I'm still going to have to RMA my newly purchased modules :-(
I guess I'm still going to have to RMA my newly purchased modules :-(
I take it this board has a die 0 issue? Attempting various incremental voltage inceases, both SPI as a whole and individually. Can't seem to get more current and power flowing to it.
Not gonna lie, no idea what I'm doing, heh.
Not gonna lie, no idea what I'm doing, heh.
help help help
my miner run perfcet
and when i do restart cgminer
does not now run?
my miner run perfcet
and when i do restart cgminer
does not now run?
Jump to: