0.3 version is stable and work perfectly in hive ccminer folder but 0.4 version didn't run with same pools.conf
This version has normal API support? You can get hashrate from each GPU in Hive web interface? 
Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 100. (Read 175032 times)
how can I run t-rex miner 0.4b on hive os?0.3 version is stable and work perfectly in hive ccminer folder but 0.4 version didn't run with same pools.conf
Is 4a the newest linux version? any benefit to Lyra2z over 3a?
in quote 106 there is a link for 0.4b
Is 4a the newest linux version? any benefit to Lyra2z over 3a?
Newest version has been reported to work with Elitehash pools (http://gin.elitehash.net). Haven't tried this personally but I'm the pool operator.
Every share submitted by it still causes a JSON parse error, but mining works normally.
Every share submitted by it still causes a JSON parse error, but mining works normally.
Code:
strat.mining.stratum.proxy.network.StratumConnection - JSON-RPC Parsing error with line: com.fasterxml.jackson.databind.JsonMappingException: No content to map due to end-of-input
which version are you using and which algo?
./t-rex -V
Built with CUDA Toolkit 9.2
t-rex v0.3a
libcurl/7.47.0 OpenSSL/1.0.2g zlib/1.2.8 libidn/1.32 librtmp/2.3
i create worker in suprnova.cc
http://owncloud.su/index.php/s/85cjdu776P45SXi
and launch miner:
t-rex -a lyra2z -o stratum+tcp://crs.suprnova.cc:4155 -u Artful.all -d 9 -p x
and pool not see my worker!
console miner:
Code:
[2018-07-03 20:56:03] Starting on stratum+tcp://crs.suprnova.cc:4155
[2018-07-03 20:56:04] GPU monitoring enabled.
[2018-07-03 20:56:04] 1 miner thread started, using 'lyra2z' algorithm.
[2018-07-03 20:56:05] New difficulty: 1 (0.00391)
[2018-07-03 20:56:05] lyra2z block 104715, diff 63.262
[2018-07-03 20:56:05] GPU#9: Intensity set to 17, 131072 cuda threads
[2018-07-03 20:56:17] [ OK ] [A/R]: 1/1, diff: 0.007, 1418.65 kH/s
[2018-07-03 20:56:38] GPU#9: ASUS GTX 1060 3GB, 1456.74 kH/s
[2018-07-03 20:56:38] [ OK ] [A/R]: 2/2, diff: 0.006, 1437.69 kH/s
[2018-07-03 20:56:38] New difficulty: 0.47619 (0.00186)
[2018-07-03 20:56:43] [ OK ] [A/R]: 3/3, diff: 0.013, 1444.27 kH/s
[2018-07-03 20:56:56] [ OK ] [A/R]: 4/4, diff: 0.020, 1447.53 kH/s
[2018-07-03 20:57:03] [ OK ] [A/R]: 5/5, diff: 0.004, 1449.22 kH/s
[2018-07-03 20:57:12] [ OK ] [A/R]: 6/6, diff: 0.003, 1450.66 kH/s
[2018-07-03 20:57:14] [ OK ] [A/R]: 7/7, diff: 0.002, 1451.42 kH/s
[2018-07-03 20:57:23] GPU#9: ASUS GTX 1060 3GB, 1456.96 kH/s
[2018-07-03 20:57:24] [ OK ] [A/R]: 8/8, diff: 0.002, 1452.12 kH/s
[2018-07-03 20:57:28] lyra2z block 104716, diff 61.851
[2018-07-03 20:57:30] [ OK ] [A/R]: 9/9, diff: 0.007, 1452.75 kH/s
[2018-07-03 20:57:33] [ OK ] [A/R]: 10/10, diff: 0.003, 1452.89 kH/s
[2018-07-03 20:57:36] [ OK ] [A/R]: 11/11, diff: 0.005, 1453.08 kH/s
[2018-07-03 20:57:38] [ OK ] [A/R]: 12/12, diff: 0.005, 1453.44 kH/s
[2018-07-03 20:57:47] [ OK ] [A/R]: 13/13, diff: 0.004, 1453.75 kH/s
[2018-07-03 20:57:50] [ OK ] [A/R]: 14/14, diff: 0.013, 1454.02 kH/s
[2018-07-03 20:57:56] [ OK ] [A/R]: 15/15, diff: 0.002, 1454.26 kH/s
[2018-07-03 20:57:59] [ OK ] [A/R]: 16/16, diff: 0.015, 1454.46 kH/s
[2018-07-03 20:58:04] [ OK ] [A/R]: 17/17, diff: 0.007, 1454.64 kH/s
[2018-07-03 20:58:17] GPU#9: ASUS GTX 1060 3GB, 1457.01 kH/s
[2018-07-03 20:58:17] [ OK ] [A/R]: 18/18, diff: 0.013, 1454.77 kH/s
[2018-07-03 20:58:19] [ OK ] [A/R]: 19/19, diff: 0.004, 1454.93 kH/s
[2018-07-03 20:58:20] [ OK ] [A/R]: 20/20, diff: 0.010, 1455.13 kH/s
[2018-07-03 20:58:23] New difficulty: 0.793651 (0.00310)
[2018-07-03 20:56:04] GPU monitoring enabled.
[2018-07-03 20:56:04] 1 miner thread started, using 'lyra2z' algorithm.
[2018-07-03 20:56:05] New difficulty: 1 (0.00391)
[2018-07-03 20:56:05] lyra2z block 104715, diff 63.262
[2018-07-03 20:56:05] GPU#9: Intensity set to 17, 131072 cuda threads
[2018-07-03 20:56:17] [ OK ] [A/R]: 1/1, diff: 0.007, 1418.65 kH/s
[2018-07-03 20:56:38] GPU#9: ASUS GTX 1060 3GB, 1456.74 kH/s
[2018-07-03 20:56:38] [ OK ] [A/R]: 2/2, diff: 0.006, 1437.69 kH/s
[2018-07-03 20:56:38] New difficulty: 0.47619 (0.00186)
[2018-07-03 20:56:43] [ OK ] [A/R]: 3/3, diff: 0.013, 1444.27 kH/s
[2018-07-03 20:56:56] [ OK ] [A/R]: 4/4, diff: 0.020, 1447.53 kH/s
[2018-07-03 20:57:03] [ OK ] [A/R]: 5/5, diff: 0.004, 1449.22 kH/s
[2018-07-03 20:57:12] [ OK ] [A/R]: 6/6, diff: 0.003, 1450.66 kH/s
[2018-07-03 20:57:14] [ OK ] [A/R]: 7/7, diff: 0.002, 1451.42 kH/s
[2018-07-03 20:57:23] GPU#9: ASUS GTX 1060 3GB, 1456.96 kH/s
[2018-07-03 20:57:24] [ OK ] [A/R]: 8/8, diff: 0.002, 1452.12 kH/s
[2018-07-03 20:57:28] lyra2z block 104716, diff 61.851
[2018-07-03 20:57:30] [ OK ] [A/R]: 9/9, diff: 0.007, 1452.75 kH/s
[2018-07-03 20:57:33] [ OK ] [A/R]: 10/10, diff: 0.003, 1452.89 kH/s
[2018-07-03 20:57:36] [ OK ] [A/R]: 11/11, diff: 0.005, 1453.08 kH/s
[2018-07-03 20:57:38] [ OK ] [A/R]: 12/12, diff: 0.005, 1453.44 kH/s
[2018-07-03 20:57:47] [ OK ] [A/R]: 13/13, diff: 0.004, 1453.75 kH/s
[2018-07-03 20:57:50] [ OK ] [A/R]: 14/14, diff: 0.013, 1454.02 kH/s
[2018-07-03 20:57:56] [ OK ] [A/R]: 15/15, diff: 0.002, 1454.26 kH/s
[2018-07-03 20:57:59] [ OK ] [A/R]: 16/16, diff: 0.015, 1454.46 kH/s
[2018-07-03 20:58:04] [ OK ] [A/R]: 17/17, diff: 0.007, 1454.64 kH/s
[2018-07-03 20:58:17] GPU#9: ASUS GTX 1060 3GB, 1457.01 kH/s
[2018-07-03 20:58:17] [ OK ] [A/R]: 18/18, diff: 0.013, 1454.77 kH/s
[2018-07-03 20:58:19] [ OK ] [A/R]: 19/19, diff: 0.004, 1454.93 kH/s
[2018-07-03 20:58:20] [ OK ] [A/R]: 20/20, diff: 0.010, 1455.13 kH/s
[2018-07-03 20:58:23] New difficulty: 0.793651 (0.00310)
it is my worker:
http://owncloud.su/index.php/s/dbmD2BoIskKarXi
Thanks
ANY WINDOWS NEWS ? 
We expect to release t-rex windows version at the end of this week or at the very beginning of the next(in case something goes wrong). For this moment everything is fine, terms not shifted, shares owned!
Windows version!!!
ANY WINDOWS NEWS ?
If I remember correct, you first need to create a worker using the suprnova interface.
which version are you using and which algo?
miner not work witch pool - https://suprnova.cc
pool not detected worker name
pool not detected worker name
Windows version asap please millions of gpus are waiting!
So, why you call for it man ? milion gpus means earnings drop near zero...
20180702 16:08:52 GPU #0: 3047.52 kH/s
20180702 16:08:52 GPU #1: 3041.77 kH/s
20180702 16:08:52 GPU #2: 3060.98 kH/s
20180702 16:08:52 GPU #3: 3148.79 kH/s
20180702 16:08:52 GPU #4: 3043.43 kH/s
20180702 16:08:52 GPU #5: 3200.09 kH/s
20180702 16:08:52 GPU #6: 3139.33 kH/s
20180702 16:08:52 GPU #7: 3131.32 kH/s
4x 1070ti and 4x 1080 core +190 mem -1000 powerlimit 150
not 3.8mh
can you helpOkay, here's a 0.4b with PHI2 support. I don't believe it's the fastest, but that's what I have at the moment. Further improvements will come out later.
CUDA 9.1 https://mega.nz/#!2AszwY5D!MatoH3X9LP2SxI8y6pDJNfuZRBN-PTNvAIjMVZ3mrEs
CUDA 9.1 https://mega.nz/#!2AszwY5D!MatoH3X9LP2SxI8y6pDJNfuZRBN-PTNvAIjMVZ3mrEs
all work! thx!
-i 17
palit jetstream 1070ti, pl 100w, core +180, mem -1000 ~ 3,85Mh/s
palit gamerock 1070, pl 100w, core +160, mem -1000 ~ 3,3Mh/s
palit jetstream 1070ti, pl 130w, core +180, mem -1000 ~ 4,3Mh/s
palit gamerock 1070, pl 130w, core +160, mem -1000 ~ 3,6Mh/s
20180702 16:08:52 GPU #0: 3047.52 kH/s
20180702 16:08:52 GPU #1: 3041.77 kH/s
20180702 16:08:52 GPU #2: 3060.98 kH/s
20180702 16:08:52 GPU #3: 3148.79 kH/s
20180702 16:08:52 GPU #4: 3043.43 kH/s
20180702 16:08:52 GPU #5: 3200.09 kH/s
20180702 16:08:52 GPU #6: 3139.33 kH/s
20180702 16:08:52 GPU #7: 3131.32 kH/s
4x 1070ti and 4x 1080 core +190 mem -1000 powerlimit 150
not 3.8mh
can you help Okay, here's a 0.4b with PHI2 support. I don't believe it's the fastest, but that's what I have at the moment. Further improvements will come out later.
CUDA 9.1 https://mega.nz/#!2AszwY5D!MatoH3X9LP2SxI8y6pDJNfuZRBN-PTNvAIjMVZ3mrEs
CUDA 9.1 https://mega.nz/#!2AszwY5D!MatoH3X9LP2SxI8y6pDJNfuZRBN-PTNvAIjMVZ3mrEs
all work! thx!
-i 17
palit jetstream 1070ti, pl 100w, core +180, mem -1000 ~ 3,85Mh/s
palit gamerock 1070, pl 100w, core +160, mem -1000 ~ 3,3Mh/s
palit jetstream 1070ti, pl 130w, core +180, mem -1000 ~ 4,3Mh/s
palit gamerock 1070, pl 130w, core +160, mem -1000 ~ 3,6Mh/s
T-Rex 0.4a Linux (HiveOS)
EVGA 1080ti FTW3 Hybrid - 4500 Mh (Core 110, Memory -450, PL 330 Wt)
MSI 1080ti Corsair Hybrid - 4350-4450 Mh (Core 110, Memory -450, PL 300 Wt)
ASUS 1070 Turbo - 2300 Mh (Core 130, Memory -500, PL 120 Wt)
EVGA 1080 Hybrid - 3250 Mh (Core 90, Memory -300, PL 250 Wt)
There is much more consumption than regular lyra2z miner like a ccminer djm34. Difference between ccminer and T-Rex is near 30% of consumption electricity.
So, what are minuses?
1) HiveOS needs differ miner settings
2) HiveOS has ability to collect data from a miner by API. It doesn't work now
P.S. It works with F2Pool now
EVGA 1080ti FTW3 Hybrid - 4500 Mh (Core 110, Memory -450, PL 330 Wt)
MSI 1080ti Corsair Hybrid - 4350-4450 Mh (Core 110, Memory -450, PL 300 Wt)
ASUS 1070 Turbo - 2300 Mh (Core 130, Memory -500, PL 120 Wt)
EVGA 1080 Hybrid - 3250 Mh (Core 90, Memory -300, PL 250 Wt)
There is much more consumption than regular lyra2z miner like a ccminer djm34. Difference between ccminer and T-Rex is near 30% of consumption electricity.
So, what are minuses?
1) HiveOS needs differ miner settings
2) HiveOS has ability to collect data from a miner by API. It doesn't work now
P.S. It works with F2Pool now
hi all ! need help.
[2018-06-27 19:15:25] Starting on stratum+tcp://xzc.f2pool.com:5740
[2018-06-27 19:15:25] GPU monitoring enabled.
[2018-06-27 19:15:25] 8 miner threads started, using 'lyra2z' algorithm.
[2018-06-27 19:15:27] New difficulty: 0.499992 (0.00195)
[2018-06-27 19:15:27] lyra2z block 93435, diff 22720.741
[2018-06-27 19:15:27] GPU#2: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#1: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#3: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#5: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#7: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#4: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#0: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:27] GPU#6: Intensity set to 17, 131072 cuda threads
[2018-06-27 19:15:35] Stratum connection interrupted
[2018-06-27 19:15:37] lyra2z block 93435, diff 22720.741
[2018-06-27 19:15:37] Stratum connection interrupted
[2018-06-27 19:15:40] Stratum connection interrupted
[2018-06-27 19:15:42] Stratum connection interrupted
[2018-06-27 19:15:44] Stratum connection interrupted
[2018-06-27 19:15:47] Stratum connection interrupted
root@GTX1:~# ping xzc.f2pool.com
PING xzc.f2pool.com (218.11.2.44) 56(84) bytes of data.
64 bytes from 218.11.2.44: icmp_seq=1 ttl=36 time=180 ms
64 bytes from 218.11.2.44: icmp_seq=2 ttl=36 time=179 ms
64 bytes from 218.11.2.44: icmp_seq=3 ttl=36 time=189 ms
64 bytes from 218.11.2.44: icmp_seq=4 ttl=36 time=176 ms
64 bytes from 218.11.2.44: icmp_seq=5 ttl=36 time=178 ms
64 bytes from 218.11.2.44: icmp_seq=6 ttl=36 time=179 ms
64 bytes from 218.11.2.44: icmp_seq=7 ttl=36 time=189 ms
64 bytes from 218.11.2.44: icmp_seq=8 ttl=36 time=189 ms
64 bytes from 218.11.2.44: icmp_seq=9 ttl=36 time=189 ms
64 bytes from 218.11.2.44: icmp_seq=10 ttl=36 time=189 ms
./t-rex -a lyra2z -o stratum+tcp://xzc.f2pool.com:5740 -u aEjfFUmLMc2GeCPXXXXXXXXXXXXXXXXXX.gtx -p x
Okay, here's a 0.4b with PHI2 support. I don't believe it's the fastest, but that's what I have at the moment. Further improvements will come out later.
CUDA 9.1 https://mega.nz/#!XF8nFIJK!gLhkJHu8-FJVsdXLjec0BMw0-KrgD2_8A6rqk5iYyfY
CUDA 9.1 https://mega.nz/#!XF8nFIJK!gLhkJHu8-FJVsdXLjec0BMw0-KrgD2_8A6rqk5iYyfY
We are working on the Windows version and hope it'll be ready soon.
Here's an experimental build for Linux. This version is no longer based on ccminer code.
Cuda 9.1: https://mega.nz/#!HZkRwQqJ!YFkdpG8hLMGKdz8vbaeRXTwPVGO0IpRk3jSQhlmLuLs
New algos: c11, x17. Feel free to benchmark them and post result here.
Also fixed crashes on systems with 9 and more GPUs. Non-yiimp pools should be supported too.
In case there are issues, you can report them in our discord channel https://discord.gg/gj7jcYf for quicker resolution.
Here's an experimental build for Linux. This version is no longer based on ccminer code.
Cuda 9.1: https://mega.nz/#!HZkRwQqJ!YFkdpG8hLMGKdz8vbaeRXTwPVGO0IpRk3jSQhlmLuLs
New algos: c11, x17. Feel free to benchmark them and post result here.
Also fixed crashes on systems with 9 and more GPUs. Non-yiimp pools should be supported too.
In case there are issues, you can report them in our discord channel https://discord.gg/gj7jcYf for quicker resolution.
what about phi2?
Jump to: