If you use Windows 10 Enterprise N LTSC there will be enough RAM free, that's how I do it.
The LTSC makes no difference in vram usage.
Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 26. (Read 175016 times)
If you use Windows 10 Enterprise N LTSC there will be enough RAM free, that's how I do it.
The LTSC makes no difference in vram usage.
Btw.: Why is RAM OC not important anymore? It was most important 2017 2018. So after RAM OC you lowered GPU Clock/ TDP until Hashrate drop. Today it mostly/ only depends on GPU Clock.
Recently: Took it down from max. RAM OC after watching an newer Video -> better Efficiency
Recently: Took it down from max. RAM OC after watching an newer Video -> better Efficiency
Can you share the video, please?
My Palit Jetstream 1070 easy does +1000 RAM OC
It was a beast then but now just the same like the cheaper Version in the Video.
Now I landed at
+600 RAM
+250 Core
73% Power
53° Celsius, 110 Watt, 27 MH/s
Gonne try the new Version and GPU Clock Lock
P.S. I'd like to mine ETC on 1060 3GB with Win10. Gonna try the Tip from above to reduce Ram usage of Win10. Not a lot more free RAM would be needed.
[/quote]
If you use Windows 10 Enterprise N LTSC there will be enough RAM free, that's how I do it.
Btw.: Why is RAM OC not important anymore? It was most important 2017 2018. So after RAM OC you lowered GPU Clock/ TDP until Hashrate drop. Today it mostly/ only depends on GPU Clock.
Recently: Took it down from max. RAM OC after watching an newer Video -> better Efficiency
Recently: Took it down from max. RAM OC after watching an newer Video -> better Efficiency
Can you share the video, please?
[/quote]
https://www.youtube.com/watch?v=ISDeqQkvsSM
My Palit Jetstream 1070 easy does +1000 RAM OC
It was a beast then but now just the same like the cheaper Version in the Video.
Now I landed at
+600 RAM
+250 Core
73% Power
53° Celsius, 110 Watt, 27 MH/s
Gonne try the new Version and GPU Clock Lock
P.S. I'd like to mine ETC on 1060 3GB with Win10. Gonna try the Tip from above to reduce Ram usage of Win10. Not a lot more free RAM would be needed.
Add --lock-cclock parameter to lock GPU core clock speed
Please give me an example of usage for each GPU ?
Please give me an example of usage for each GPU ?
Oh and just a reminder if you intend to hold both ETH + ZIL DAG in GPU memory, ETH is about 5GB, ZIL is close to 2GB, so 8GB cards are getting close to the limit (eg. RTX 3070) ... but 10GB cards (RTX 3080) or even 12GB cards (RTX 3060) no problem .... It's just that one of my 3070 rigs was reporting an out of memory problem with dual mining ZIL+ETH, yet another RIG with mixed 3060/3070 would DUAL mine fine ... I'm suspect as to if I have some dodgy video memory on one of the cards in the 3070 RIG.
Dude zilliqa has 1024mb DAG, it stay on epoch 0 forever ^^ (extra-dag-epoch 0
) and eth has around 4.258GB and not 5GB DAG. Look in the log.You mine on windows10? It reserve much vram on nvidia cards. But i am on the way to reduce vram usage on windows10. Maybe i found something in the last days. 1060 6GB had around 700mb free in the past, now after windows10 update and driver 430.86 i have 1400mb free on 11 cards and 1 card has 1600mb free. The cards can hold Zil and ETH DAG at the same time.
I'll try another rig with 6GB cards, there are only 600mb free per card
By the way, windows developer mode has no advantages for mining.
can i run dual mining ETH/ZIL with two different pool? example: ETH at nanopool.org and ZIL at ezil.me?
Checkout the example batch file "ETH+ZIL-shardpool.bat", which works for shardpool.io for ZIL & ethermine for ETH... but I found some zil mining pools force you to also send eth mining to their pool.
Here's my windows batch file, username is your ethwallet address and you pass your ZIL wallet address to the ethermine as proxy, '-w crypto1' is your RIG or worker name if you track multiple mining rigs:
"t-rex.exe -a ethash -o stratum+tcp://eu1-zil.shardpool.io:3333 -u 0x9eee2abb7b781638f9ef66c37a0023b45c1ad422 -p [email protected]:4444 -w crypto1 --extra-dag-epoch 0"
I have multiple RIGS doing this and can check ethermine.org website for eth mining details and shardpool.io for ZIL mining details.
Thanks for the info.
I already mine ZIL at ezil.me and ETH at nanopool.org with TeamRedMiner (AMD's rig) . I want to use T-Rex for my Nvidia's rig to run dual mining ETH/ZIL at the same pools.
I will use my 3060 for my pc until T-rex unlock this gpu
TREX is fine for RTX3060 using Windows Developer Unlock, I even dual mine with it:
Mining at eu1-zil.shardpool.io:3333, diff: 4.29 G
GPU #0: ASUS NVIDIA RTX 3070 - 62.28 MH/s, [T:60C, P:162W, F:60%, E:421kH/W], 23/23 R:0%
GPU #1: ASUS NVIDIA RTX 3070 - 62.28 MH/s, [T:57C, P:162W, F:60%, E:424kH/W], 23/23 R:0%
GPU #2: Gigabyte NVIDIA RTX 3070 - 61.92 MH/s, [T:56C, P:183W, F:60%, E:371kH/W], 15/15 R:0%
GPU #3: MSI NVIDIA RTX 3060 - 49.04 MH/s, [T:42C, P:110W, F:55%, E:486kH/W], 12/12 R:0%
Hashrate: 235.51 MH/s, Shares/min: 2.356 (Avr. 2.695), Avr.P: 563W, Avr.E: 418kH/W
Uptime: 27 mins 13 secs | Algo: ethash | T-Rex v0.20.4
WD: 27 mins 15 secs, shares: 73/73
Oh and just a reminder if you intend to hold both ETH + ZIL DAG in GPU memory, ETH is about 5GB, ZIL is close to 2GB, so 8GB cards are getting close to the limit (eg. RTX 3070) ... but 10GB cards (RTX 3080) or even 12GB cards (RTX 3060) no problem .... It's just that one of my 3070 rigs was reporting an out of memory problem with dual mining ZIL+ETH, yet another RIG with mixed 3060/3070 would DUAL mine fine ... I'm suspect as to if I have some dodgy video memory on one of the cards in the 3070 RIG.
can i run dual mining ETH/ZIL with two different pool? example: ETH at nanopool.org and ZIL at ezil.me?
Checkout the example batch file "ETH+ZIL-shardpool.bat", which works for shardpool.io for ZIL & ethermine for ETH... but I found some zil mining pools force you to also send eth mining to their pool.
Here's my windows batch file, username is your ethwallet address and you pass your ZIL wallet address to the ethermine as proxy, '-w crypto1' is your RIG or worker name if you track multiple mining rigs:
"t-rex.exe -a ethash -o stratum+tcp://eu1-zil.shardpool.io:3333 -u 0x9eee2abb7b781638f9ef66c37a0023b45c1ad422 -p [email protected]:4444 -w crypto1 --extra-dag-epoch 0"
I have multiple RIGS doing this and can check ethermine.org website for eth mining details and shardpool.io for ZIL mining details.
can i run dual mining ETH/ZIL with two different pool? example: ETH at nanopool.org and ZIL at ezil.me?
T-Rex 0.20.4
* Add --lock-cclock parameter to lock GPU core clock speed
* (Windows) Add --lock-cv parameter to lock GPU core voltage
* (Windows) Add --pstate parameter to lock GPU performance/power state (currently p0 is the only supported value)
* (Windows) Allow passing in values greater than 100% to --pl if the GPU supports it
* Reduce miner startup time
Bug fixes:
* T-Rex has a problem with GPU, terminating... error when system time changes as a result of time synchronisation
* (ethash) ethproxy mode is broken
* (Windows) NVAPI_NOT_SUPPORTED error when passing in out of range values to --mclock, --cclock and so on
* GPUs keep consuming significant amount of power even after being disabled due to the temperature exceeding --temperature-limit
* Miner fails to start with --mt parameter specified if video drivers are older than 410.xx
* (Web UI) Miner fails to start after saving the config file through the Web UI
* --help command queries GPU status preventing the display of the help message if NVIDIA driver is not installed
Download
Linux: https://trex-miner.com/download/t-rex-0.20.4-linux.tar.gz [SHA-1 checksum: 710d6864a8ae7e30096f75ef3219d5e2908e0456]
Windows: https://trex-miner.com/download/t-rex-0.20.4-win.zip [SHA-1 checksum: 3dd99c4fe14ffcc326dd09ea620471e02d34454e]
* Add --lock-cclock parameter to lock GPU core clock speed
* (Windows) Add --lock-cv parameter to lock GPU core voltage
* (Windows) Add --pstate parameter to lock GPU performance/power state (currently p0 is the only supported value)
* (Windows) Allow passing in values greater than 100% to --pl if the GPU supports it
* Reduce miner startup time
Bug fixes:
* T-Rex has a problem with GPU, terminating... error when system time changes as a result of time synchronisation
* (ethash) ethproxy mode is broken
* (Windows) NVAPI_NOT_SUPPORTED error when passing in out of range values to --mclock, --cclock and so on
* GPUs keep consuming significant amount of power even after being disabled due to the temperature exceeding --temperature-limit
* Miner fails to start with --mt parameter specified if video drivers are older than 410.xx
* (Web UI) Miner fails to start after saving the config file through the Web UI
* --help command queries GPU status preventing the display of the help message if NVIDIA driver is not installed
Download
Linux: https://trex-miner.com/download/t-rex-0.20.4-linux.tar.gz [SHA-1 checksum: 710d6864a8ae7e30096f75ef3219d5e2908e0456]
Windows: https://trex-miner.com/download/t-rex-0.20.4-win.zip [SHA-1 checksum: 3dd99c4fe14ffcc326dd09ea620471e02d34454e]
Please add support ERGO "ERG" https://ergoplatform.org/en/
And change fee ETH, and ETC it's very nice the fees of 1% but hey you have to know how to look at the difficulty and see that we barely make 0.03ETH for 1Ghs currently imagined the small rig of 6 cards ...
tks
I will use my 3060 for my pc until T-rex unlock this gpu
T-Rex 0.20.4
Download
Linux: https://trex-miner.com/download/t-rex-0.20.4-linux.tar.gz [SHA-1 checksum: 710d6864a8ae7e30096f75ef3219d5e2908e0456]
Windows: https://trex-miner.com/download/t-rex-0.20.4-win.zip [SHA-1 checksum: 3dd99c4fe14ffcc326dd09ea620471e02d34454e]
Download
Linux: https://trex-miner.com/download/t-rex-0.20.4-linux.tar.gz [SHA-1 checksum: 710d6864a8ae7e30096f75ef3219d5e2908e0456]
Windows: https://trex-miner.com/download/t-rex-0.20.4-win.zip [SHA-1 checksum: 3dd99c4fe14ffcc326dd09ea620471e02d34454e]
That's great!
Can you provide a download link like https://trex-miner.com/download to directly jump to the files?
T-Rex 0.20.4
* Add --lock-cclock parameter to lock GPU core clock speed
* (Windows) Add --lock-cv parameter to lock GPU core voltage
* (Windows) Add --pstate parameter to lock GPU performance/power state (currently p0 is the only supported value)
* (Windows) Allow passing in values greater than 100% to --pl if the GPU supports it
* Reduce miner startup time
Bug fixes:
* T-Rex has a problem with GPU, terminating... error when system time changes as a result of time synchronisation
* (ethash) ethproxy mode is broken
* (Windows) NVAPI_NOT_SUPPORTED error when passing in out of range values to --mclock, --cclock and so on
* GPUs keep consuming significant amount of power even after being disabled due to the temperature exceeding --temperature-limit
* Miner fails to start with --mt parameter specified if video drivers are older than 410.xx
* (Web UI) Miner fails to start after saving the config file through the Web UI
* --help command queries GPU status preventing the display of the help message if NVIDIA driver is not installed
Download
Linux: https://trex-miner.com/download/t-rex-0.20.4-linux.tar.gz [SHA-1 checksum: 710d6864a8ae7e30096f75ef3219d5e2908e0456]
Windows: https://trex-miner.com/download/t-rex-0.20.4-win.zip [SHA-1 checksum: 3dd99c4fe14ffcc326dd09ea620471e02d34454e]
* Add --lock-cclock parameter to lock GPU core clock speed
* (Windows) Add --lock-cv parameter to lock GPU core voltage
* (Windows) Add --pstate parameter to lock GPU performance/power state (currently p0 is the only supported value)
* (Windows) Allow passing in values greater than 100% to --pl if the GPU supports it
* Reduce miner startup time
Bug fixes:
* T-Rex has a problem with GPU, terminating... error when system time changes as a result of time synchronisation
* (ethash) ethproxy mode is broken
* (Windows) NVAPI_NOT_SUPPORTED error when passing in out of range values to --mclock, --cclock and so on
* GPUs keep consuming significant amount of power even after being disabled due to the temperature exceeding --temperature-limit
* Miner fails to start with --mt parameter specified if video drivers are older than 410.xx
* (Web UI) Miner fails to start after saving the config file through the Web UI
* --help command queries GPU status preventing the display of the help message if NVIDIA driver is not installed
Download
Linux: https://trex-miner.com/download/t-rex-0.20.4-linux.tar.gz [SHA-1 checksum: 710d6864a8ae7e30096f75ef3219d5e2908e0456]
Windows: https://trex-miner.com/download/t-rex-0.20.4-win.zip [SHA-1 checksum: 3dd99c4fe14ffcc326dd09ea620471e02d34454e]
My 3060 on the way , I just think to put this gpu to my desktop replace my 1060 6gb pc
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
Its about GPU driver for RTX 3060.
For ETHash you need 470.05 beta - this is the driver without ETHash nerf...
Other algos are untouched and with full speed (with normal drivers too).
I have it and posted it here, but was blamed bcs of security, so beware of fake links and viruses
I forget to say I'm HiveOS user
and did you tried to mine ETC with 470.05 beta ? , Could you tell me hash ETC?
Because I will try soon but haven't idea about average hash for ETH / ETC
x16 pcie already have
Hi!
Sometimes (once per 2-3 days) the miner (v 0.20.3) just quits. When I see no hashrate at the pool I check the system (Windows 10 x64 based) and see that everything is running except the miner. The system didn't reboot or had any stress.
What can bee the reason? Probably some timeout or repeating errors?
The bat file string is as follows. The GPUs are OCed by AB.
Thank you!
timeout /t 50
[path]t-rex.exe -a ethash -o stratum+tcp://eu1.ethermine.org:4444 -u [wallet address] -p x -w [rig name] --mt 0,0,1,0,0,0 -b 0 --temperature-limit 85 --temperature-start 50 --ab-indexing
Imagine if we had a logging feature! Just kidding check logs. Sometimes (once per 2-3 days) the miner (v 0.20.3) just quits. When I see no hashrate at the pool I check the system (Windows 10 x64 based) and see that everything is running except the miner. The system didn't reboot or had any stress.
What can bee the reason? Probably some timeout or repeating errors?
The bat file string is as follows. The GPUs are OCed by AB.
Thank you!
timeout /t 50
[path]t-rex.exe -a ethash -o stratum+tcp://eu1.ethermine.org:4444 -u [wallet address] -p x -w [rig name] --mt 0,0,1,0,0,0 -b 0 --temperature-limit 85 --temperature-start 50 --ab-indexing
My 3060 on the way , I just think to put this gpu to my desktop replace my 1060 6gb pc
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
Its about GPU driver for RTX 3060.
For ETHash you need 470.05 beta - this is the driver without ETHash nerf...
Other algos are untouched and with full speed (with normal drivers too).
I have it and posted it here, but was blamed bcs of security, so beware of fake links and viruses
My 3060 on the way , I just think to put this gpu to my desktop replace my 1060 6gb pc
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
but i see 3060 not bad hashrate but they used lolminer
T-rex support 3060 and unlocked ?
Jump to: