Pages:
Author

Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 50. (Read 175032 times)

member
Activity: 1558
Merit: 69
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error


Yeah it was around that day mine stopped working, I asked in trex's discord channel and some1 said the 3gb stopped working... now idk what to mine since I kinda like RVN and gotta waste time researching another coin to mine and it's probably not as good as mining RVN

PROGPOW IS BASED ON ETHEREUM ALGORITHM--

And so is KAWPoW.  Notice that in the remark within the error message "cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory", it states that KAWPoW is hashing on a DAG from "epoch 342".  The algorithm was developed to use all aspects of a GPU's compute capabilities as well as the GPU memory.  It is a really stressful and ASIC resistant algorithm.  Your 3GB card has no room in memory for the DAG.       --scryptr


GTX 1060 6GB,Win 10 64-bit ,TT-miner 5.0.1.Output video in system Intel hd 610.MSI shows 89mb loading gp memory in idle and 2569mb  on miner(3072-2569=503mb).So we have 503mb free video memory and why GTX 1063 can not creating DAG file.In the error shown miner concerning lack of memory there is no point.in this situation I am surprised by the lack of any information.If you look 25 June (GMT+3)7:00 p.m from to 3:00 a.m
 https://2miners.com/ru/rvn-network-hashrate we see drop in network power Ravencoin by about 20-25 percent respectively and Difficulty.Conclusion almost all or part 3gb card dropped.Two weeks no information.All this is a little disappointing.

On Nvidia Cards, Windows10 reserve much vram. So a GTX 1060 3GB has only around 2500 mb available. Only solution is to switch to Linux or other coin.
legendary
Activity: 3164
Merit: 1003
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error


Yeah it was around that day mine stopped working, I asked in trex's discord channel and some1 said the 3gb stopped working... now idk what to mine since I kinda like RVN and gotta waste time researching another coin to mine and it's probably not as good as mining RVN

PROGPOW IS BASED ON ETHEREUM ALGORITHM--

And so is KAWPoW.  Notice that in the remark within the error message "cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory", it states that KAWPoW is hashing on a DAG from "epoch 342".  The algorithm was developed to use all aspects of a GPU's compute capabilities as well as the GPU memory.  It is a really stressful and ASIC resistant algorithm.  Your 3GB card has no room in memory for the DAG.       --scryptr

A work around.
Yes! 3GB & 4GB GPUs can still mine cryptocurrency.
https://www.youtube.com/watch?v=ktxXKGlHg24
newbie
Activity: 21
Merit: 0
Oh, 1070 on algo - mtp rig reboot every day.
1070Ti all ok. Maybe somebody knows how to fix it? Huh
T-rex 0.15.8, nvidia 451.67, swap-30Gb, memory-16Gb
newbie
Activity: 2
Merit: 0
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error


Yeah it was around that day mine stopped working, I asked in trex's discord channel and some1 said the 3gb stopped working... now idk what to mine since I kinda like RVN and gotta waste time researching another coin to mine and it's probably not as good as mining RVN

PROGPOW IS BASED ON ETHEREUM ALGORITHM--

And so is KAWPoW.  Notice that in the remark within the error message "cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory", it states that KAWPoW is hashing on a DAG from "epoch 342".  The algorithm was developed to use all aspects of a GPU's compute capabilities as well as the GPU memory.  It is a really stressful and ASIC resistant algorithm.  Your 3GB card has no room in memory for the DAG.       --scryptr


GTX 1060 6GB,Win 10 64-bit ,TT-miner 5.0.1.Output video in system Intel hd 610.MSI shows 89mb loading gp memory in idle and 2569mb  on miner(3072-2569=503mb).So we have 503mb free video memory and why GTX 1063 can not creating DAG file.In the error shown miner concerning lack of memory there is no point.in this situation I am surprised by the lack of any information.If you look 25 June (GMT+3)7:00 p.m from to 3:00 a.m
 https://2miners.com/ru/rvn-network-hashrate we see drop in network power Ravencoin by about 20-25 percent respectively and Difficulty.Conclusion almost all or part 3gb card dropped.Two weeks no information.All this is a little disappointing.
legendary
Activity: 1797
Merit: 1028
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error


Yeah it was around that day mine stopped working, I asked in trex's discord channel and some1 said the 3gb stopped working... now idk what to mine since I kinda like RVN and gotta waste time researching another coin to mine and it's probably not as good as mining RVN

PROGPOW IS BASED ON ETHEREUM ALGORITHM--

And so is KAWPoW.  Notice that in the remark within the error message "cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory", it states that KAWPoW is hashing on a DAG from "epoch 342".  The algorithm was developed to use all aspects of a GPU's compute capabilities as well as the GPU memory.  It is a really stressful and ASIC resistant algorithm.  Your 3GB card has no room in memory for the DAG.       --scryptr
legendary
Activity: 3164
Merit: 1003
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error

 




Yeah it was around that day mine stopped working, I asked in trex's discord channel and some1 said the 3gb stopped working... now idk what to mine since I kinda like RVN and gotta waste time researching another coin to mine and it's probably not as good as mining RVN

Try Zano.  Smiley
newbie
Activity: 3
Merit: 0
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error

 




Yeah it was around that day mine stopped working, I asked in trex's discord channel and some1 said the 3gb stopped working... now idk what to mine since I kinda like RVN and gotta waste time researching another coin to mine and it's probably not as good as mining RVN
newbie
Activity: 2
Merit: 0
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
I had seen same problem 25.07.20.All my twelve rig showed this error. Changes pool and miners(T-Rex 15.8,Kawpowminer,NBMiner) don't help.
Interestingly 6GB cards work normal , but need disable 3GB cards on rig.Nowhere information for this problem(pools,miner guide,forums,official social network and programs ravencoin).
There was such an impression as if I alone faced this problem.But yours post shows me that I'm not the only one.
It is clear that the problem lies in the lack of RAM, despite the fact that this volume should be enough until next summer.Or this is another CUDA error

 


newbie
Activity: 3
Merit: 0
Hello,
I'm getting this error:
"can't find nonce with device [ID=0, GPU=0], cuda exception in [ProgPOW::ProgPOW::initEpoch, 342], out of memory"

I've been told GTX 1060 3gb can no longe mine RVN, is that true?
I got trex0.15.8 version cuda 10.0

Can some1 help me?
newbie
Activity: 22
Merit: 2
how can i disable an specific GPU ?

at the end of you bat line put --devices 1 in this case only GPU 1 will mine

t-rex -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u RRbbmGHjTpuvJ86bFdUi1iZdT9qDcz71uT.TestWorker -p x --devices 1
pause

and always put second pool in bat file just in case first one goes offline

t-rex -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u Walletaddress.WorkerName -p x -o stratum+tcp://eu.ravenminer.com:3838 -u Walletaddress.WorkerName -p x --devices 1
pause
newbie
Activity: 22
Merit: 2
how can i disable an specific GPU ?

at the end of you bat line put --devices 1 in this case only GPU 1 will mine

t-rex -a kawpow -o stratum+tcp://rvn.2miners.com:6060 -u RRbbmGHjTpuvJ86bFdUi1iZdT9qDcz71uT.TestWorker -p x --devices 1
pause
newbie
Activity: 11
Merit: 0
how can i disable an specific GPU ?
legendary
Activity: 3164
Merit: 1003

@trexminer. Is it possible to add a command to see in the cmd window the pool I'm mining at? Helps with knowing what pool I'm mining at for failover pool. thx  Smiley
sr. member
Activity: 2142
Merit: 353
Xtreme Monster

Same thing here, since the update to 451.418 drivers I got instant : initialize error, memory dump at starting.
Same thing with ccminer on ZCOIN

I think the problem could be related to this driver now in CUDA 11
For now, I'll try rollbacking to previous driver, and waiting for miners update to CUDA 11

In my case is a hobby, I always test new drivers,  i dont mine 24/7, so i kept the driver. Yeah, might be cuda related.
full member
Activity: 839
Merit: 100
0.15.7
Bug fixes:
* (KAWPOW) "kawpow validation failed" rejects (especially on high intensity and low difficulty)
* Use %HOSTNAME%, %USER% environment variables in parameters or config file

t-rex does not work with nvidia new driver 451.48 on ravencoin, no sure about other coins.

Same thing here, since the update to 451.418 drivers I got instant : initialize error, memory dump at starting.
Same thing with ccminer on ZCOIN

I think the problem could be related to this driver now in CUDA 11
For now, I'll try rollbacking to previous driver, and waiting for miners update to CUDA 11
sr. member
Activity: 2142
Merit: 353
Xtreme Monster
0.15.7
Bug fixes:
* (KAWPOW) "kawpow validation failed" rejects (especially on high intensity and low difficulty)
* Use %HOSTNAME%, %USER% environment variables in parameters or config file

t-rex does not work with nvidia new driver 451.48 on ravencoin, no sure about other coins.
newbie
Activity: 46
Merit: 0
Staker.network - POS Smart Contract ETH Token
Any command to restart the miner once in a while ?

I mean closing it completely and starting it back automaticaly ?

I keep having these error and bad share sometimes that even the reconnect command is not solving.
member
Activity: 283
Merit: 63
0.15.7
Bug fixes:
* (KAWPOW) "kawpow validation failed" rejects (especially on high intensity and low difficulty)
* Use %HOSTNAME%, %USER% environment variables in parameters or config file
newbie
Activity: 2
Merit: 0
How is with payments ? I receive small payment and then i mined 60 RVN and still didnt receive my coins, is it after 50 coins i should get it ?
full member
Activity: 1148
Merit: 132
gminer is much faster on 20x nvidia cards
Pages:
Jump to: