T-rex is the fastest miner for x16r ?, many use ccminerspmodgt5 ...
I have 4x1070
Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 90. (Read 174976 times)
and yeah thats stats are for renesis algo..pretty well, what you think?
My stats: 1080ti, tdp 65, core + 100 mem -500, and doing 30 mhs
what would be recomended intensity for 1080ti rig on windows 10? miner is setting 17 by default
also this only seems to be an issue with X16R. All other algos seem normal and report consistent hashrates (including X16S).
For X16R my reported hashrates seem to vary wildly. 3 starts on a single 1080 Ti gives:
27MH/s
24MH/s
22MH/s
I let it run for ~10 minutes and the hashrate stays at these levels. I get that X16R hashrate can vary dramatically depending on the block, but this seems way out of whack.
Anyone else seeing this? Has anyone tested against the latest Z-enemy on x16r?
27MH/s
24MH/s
22MH/s
I let it run for ~10 minutes and the hashrate stays at these levels. I get that X16R hashrate can vary dramatically depending on the block, but this seems way out of whack.
Anyone else seeing this? Has anyone tested against the latest Z-enemy on x16r?
Would it be possible to add wattage (W) consumption like ccminer/z-enemy?
I have a 8gpu rig and that has some 4 Zotac GTX mini on it.
Hello all
Thanks for the great miner.
I run the lyra2z algo for IFX coin
Anyway, I have 2 problems.
1 - The 0.5.7 version does not launch at all on my windows 10 setup (8700k, only 1 1080ti, latest nvidia drivers at this day)
2 - The 0.5.1 runs fine, but when I let the default intensity (17), it makes the display laggy. When I set intensity 16, there is no lag at all, but the hashrate drops from 4300 to 3200 mh/s, so not better than a ccminer.
Is there a way to fix one or all my problems ?
Thanks a lot
ps : other thing : contrary to ccminer wich is 55% power consumption on lyra2z, this miner takes 80% approx. Is it normal ?
Thanks for the great miner.
I run the lyra2z algo for IFX coin
Anyway, I have 2 problems.
1 - The 0.5.7 version does not launch at all on my windows 10 setup (8700k, only 1 1080ti, latest nvidia drivers at this day)
2 - The 0.5.1 runs fine, but when I let the default intensity (17), it makes the display laggy. When I set intensity 16, there is no lag at all, but the hashrate drops from 4300 to 3200 mh/s, so not better than a ccminer.
Is there a way to fix one or all my problems ?
Thanks a lot
ps : other thing : contrary to ccminer wich is 55% power consumption on lyra2z, this miner takes 80% approx. Is it normal ?
On the t-rex-0.5.7-linux-cuda9.2 release, maybe others I haven't checked them, however, there maybe a bug.
If you leave "stratum+tcp://" out the first 2 chars are removed from the server string and it won't connect.
Very minor but normally this prefix can be omitted.
If you leave "stratum+tcp://" out the first 2 chars are removed from the server string and it won't connect.
Very minor but normally this prefix can be omitted.
x16r
[Bear in mind that X16R has a variable hashrate due to the ordering of the hashing algos]
Zotac 1080ti - 17.5mh/s - 23.4mh/s
Asus ROG 1080ti - 17.6mh/s - 25.2mh/s
EVGA 1080ti sc - 16.92mh/s - 22.9mh/s
Linux Ubuntu 18.01
No overclocking/underclock
Power limit at 180w - which is about 67% of total
Total for 2 x Zotac 1080ti + 2 x Asus ROG 1080ti + 1 x EVGA 1080ti sc is between 83mh/s and 120mh/s
970w total system
Could probably squeeze more out. Also should be noted that temps are the lowest I've seen on x16r
Lyra2z
Zotac 1080ti - 4250kh/s
Asus ROG 1080ti - 4098kh/s
EVGA 1080ti sc - 3960kh/s
Linux Ubuntu 18.01
No overclocking/underclock
Power limit is at 160w - which is about 59% of total
890w total system
[Bear in mind that X16R has a variable hashrate due to the ordering of the hashing algos]
Zotac 1080ti - 17.5mh/s - 23.4mh/s
Asus ROG 1080ti - 17.6mh/s - 25.2mh/s
EVGA 1080ti sc - 16.92mh/s - 22.9mh/s
Linux Ubuntu 18.01
No overclocking/underclock
Power limit at 180w - which is about 67% of total
Total for 2 x Zotac 1080ti + 2 x Asus ROG 1080ti + 1 x EVGA 1080ti sc is between 83mh/s and 120mh/s
970w total system
Could probably squeeze more out. Also should be noted that temps are the lowest I've seen on x16r
Lyra2z
Zotac 1080ti - 4250kh/s
Asus ROG 1080ti - 4098kh/s
EVGA 1080ti sc - 3960kh/s
Linux Ubuntu 18.01
No overclocking/underclock
Power limit is at 160w - which is about 59% of total
890w total system
invalid shares for LUX
any benchmark x16r algorithm?
After > 5 min1050ti - 5.2 (intensity 18)
1060/3 - 9,8-10,1 MH (intensity 19)
Updated HiveOS custom miner package to v0.5.7
But @trexminer
1) There is bug with log-file. I'm think it's related with static array or something else
For example:
/var/log/t-rex.log - OK
/var/log/t-rex/t-rex.log - OK
/var/log/miner/t-rex/t-rex.log - FAIL
2) ccminer API method "threads" not available but this not important for me. JSON more then enough
But @trexminer
1) There is bug with log-file. I'm think it's related with static array or something else
For example:
/var/log/t-rex.log - OK
/var/log/t-rex/t-rex.log - OK
/var/log/miner/t-rex/t-rex.log - FAIL
2) ccminer API method "threads" not available but this not important for me. JSON more then enough
can t-rex be used to mine RENESIS SOLO? and not in a pool?
what's the bat file setup for failover pool? It's different than 0.5.1
Windows version is working amazing just like linux version. Stable and without any problem for me. Good job 
@trexminer Please make builds for SM 5.0 cards. thx
any benchmark x16r algorithm?
try cryptodredge, it shows 6,5mh on 1080 and 9 on ti
WoW! Thanks! This miner is real beast!
Jump to: