Pages:
Author

Topic: T-Rex 0.26.8 ETHW, ETC (+dual mining) GPU miner - page 93. (Read 174976 times)

member
Activity: 413
Merit: 17
Phi2 needs much lower core offset compared to other coins.
full member
Activity: 602
Merit: 114
I tested for Lux mining with  PHI2 it gives good hashes for +100mhz core but crashes between 5-10 minutes.
For +50 mhz works fine.
Increasing memory brings nothing.

For Lyra2z it is good and have no problem.

Thank you dev.  Shocked
member
Activity: 147
Merit: 10
On PHI2 it's constantly crushing, testing low power usage on tribus and lyra2z algo with 1080ti getting amazing results for 45% power draw!!
member
Activity: 147
Merit: 10
I finally got this running on my ASUS motherboards apperantly only one Nvidia drivers works stable with 19GPU mining board.

T-Rex algorithm performances for 1080Ti:
lyra2z 65TDP +151 core -400 mem = 4288 Kh/s 59'C
lyra2z 65TDP +151 core -502 mem = 4413 Kh/s 58'C
lyra2z 70TDP +151 core -400 mem = crashing
lyra2z 70TDP +151 core -502 mem = 4490 Kh/s 63'C
So far for lyra2z best available miner!
newbie
Activity: 2
Merit: 0
hashrate for joining pool max stream?

T-Rex miner for modern Nvidia GPUs - Pascal & Maxwell generations

Supported algorithms:
lyra2z
phi2
hsr
c11
x17
phi
tribus

Runs on both Linux and Windows.
New algorithms/improvements are on their way.
Supported GPU architecture: Pascal (10xx series) and Maxwell

Performance

Lyra2z:
1070 (Core +160, Mem -500): ~2300 Kh/s
1070 Ti (Core +210, Mem -600): ~3000-3100 Kh/s
1080 Ti: 4300 Kh/s

Tribus:
1070 (Core +190, Mem 0):
   PL 150W - 77 Mh/s
   PL 130W - 74 Mh/s
1070 Ti (Core +210, Mem -600):
   PL 180W - 101 Mh/s
   PL 150W - 95 Mh/s
1080 Ti: ?

Phi1612:
1070 (Core +170, Mem -500):
   PL 130W - 23 Mh/s
1070 Ti (Core +210, Mem -600):
   PL 180W - 31.5 Mh/s
   PL 150W - 29.8 Mh/s
1080 Ti: ?


Please, do report what hashrate you get using other cards for our stats, and also feel free to experiment with overclock/power limit/intensity settings.

Downloads
v0.5.1

Linux:
CUDA 9.1: https://mega.nz/#!Ld0FBYBS!Ggk_JqBj8cGkPW1btCpQJC-KRxi2QZQAiOW2JK7blcE
CUDA 9.2: https://mega.nz/#!rU0VUQSa!7GssZ-lleklW8RRXu4uQp_-QBzfeDCkraHSZTAqTVPk

Windows:
CUDA 9.1/9.2: https://mega.nz/#!6Rk1xa5A!0Du8UIFg0Ue6dmmXwHKEZPwNVbaYDCOTse4Jk9cqsO8

Usage
T-Rex supports command line arguments similar to that of ccminer:
lyra2z:
Code:
t-rex -a lyra2z -o stratum+tcp://pool.bsod.pw:2159 -u -p d=0.01
phi:
Code:
t-rex -a phi2 -o stratum+tcp://pool.bsod.pw:6667 -u -p d=0.01
tribus:
Code:
t-rex -a tribus -o stratum+tcp://pool.bsod.pw:2260 -u -p d=0.01

Discord
https://discord.gg/gj7jcYf

Dev fee
Dev fee is set to 1%. When the miner starts and stops mining dev fee it reports it to the console output.

Release notes
0.5.1
Faster phi2, lyra2z, x17, c11.
Added new algo HSR.
Added API (HTTP JSON [preferable] and telnet ccminer compatible) - pending integration with monitoring software (ethmonitoring, awesome miner etc.)
Multiple bug fixes, new config options, failover pools.

0.4c
Added Phi2.
JSON config file support. Multiple bugfixes.
Miner source code is rewritten from scratch and no longer based on ccminer.

0.3a
Faster Lyra2z, Tribus and slightly faster Phi1612.
Warning: If using Lyra2z in this version you will likely need to lower your overclock settings and probably also increase the power limit.

0.2
Added Lyra2z and Tribus.

0.1
Initial release. Phi1612 added.

member
Activity: 418
Merit: 21
I just tried to start both linux versions on Ubuntu 16.04 with ROCm drivers (to test performance on my Vega 64's). But all I get is this:

ERROR: Can't start miner, driver does not support CUDA 5.5 API, update your nvidia driver!

Am I doing something wrong?
jr. member
Activity: 127
Merit: 8
hey guys, i just finished to benchmark 1060, 1070, 1070 ti and 1080 ti for all algos, everything can be found here https://1stminingrig.com/t-rex-0-5-1-nvidia-gpu-miner-benchmarks-and-review/

let me know if you have any questions Smiley

newbie
Activity: 34
Merit: 0
Amazing work on linux. Good job devs
newbie
Activity: 35
Merit: 0
T-Rex miner for modern Nvidia GPUs - Pascal & Maxwell generations

Does miner support proxy?
If not, will you add it ?


Nothing has been done for the proxy support. I added your wish in our todo list.
Nice news.
How soon will you do this ? Smiley
newbie
Activity: 23
Merit: 0

Aвтop yшeл c ядpa ccminer c eгo cлoв и API пoлyчилocь тoжe нe пoлнocтью coвмecтимoe c  ccminer. Пoэтoмy в лoб нe зapaбoтaeт.

Ceйчac дoxoднocть пo этим aлгopитмaм, кoтopыe peaлизoвaны в мaйнepe пoдyпaлa, я пpocтo oбнoвлю cвoй custom miner c 0.4c дo тeкyщeй вepcии c иcпoльзoвaниeм yжe API. Ho этo бyдeт yжe opиeнтиpoвoчнo вocкpeceньe-пoнeдeльник.

Bтopoй cцeнapий - aвтop иcпpaвит API, чтoбы oнo былo coвмecтимo c ccminer тoгдa мoжнo бyдeт включить eгo в cбopкy кaк и ocтaльныe фopки.

Are there news for HiveOS users?
member
Activity: 283
Merit: 63
T-Rex miner for modern Nvidia GPUs - Pascal & Maxwell generations

Does miner support proxy?
If not, will you add it ?


Nothing has been done for the proxy support. I added your wish in our todo list.
member
Activity: 283
Merit: 63
Testing version 0.5.1 hash rate is 17% higher than ccminer 2.3, but I need improvements in the API before I can deploy t-rex to my machines:

1. Need to add GPU Temperature to the API.  I have had fans already fail and this is my only indication that is GPU is over-heating.  The increased profit is not worth the risk of burring up a $600 GPU.  ccminer does this already, you can check the code to see where to get the information.

2. Need to add URL to the API.  I switch coins.  I mine multiple coins.  I use the API to double check what each miner is doing.  I need to be able to extract the server name and port from the API (for example: mine.loki.fairpool.xyz:5577).

I also noticed that "gpus" "intensity" is always zero in the API.

We will add this in the future releases with json response. Do you use HTTP api or telnet?
newbie
Activity: 25
Merit: 0
Excellent results! Increase hash by 20%. Before that I used ccminer 2.2.4.
newbie
Activity: 35
Merit: 0
T-Rex miner for modern Nvidia GPUs - Pascal & Maxwell generations

Does miner support proxy?
If not, will you add it ?
sr. member
Activity: 954
Merit: 250
I can share some rezults:
X17, 100% TDP
gtx 1070 - 12,4; 1070ti - 13,8; 1080ti - 22,4 - w/o o/c;

+30 / - 500 mem, 85% TDP
gtx 1070 - 12; 1070ti - 13,2; 1080ti - 21;

+50 / - 500 mem, 70% TDP
gtx 1070 - 11,3; 1070ti - 12,7; 1080ti - 20;

55 % TDP
gtx 1070 - 10,5; 1070ti - 10,9; 1080ti - 18,8.
jr. member
Activity: 51
Merit: 5
Testing version 0.5.1 hash rate is 17% higher than ccminer 2.3, but I need improvements in the API before I can deploy t-rex to my machines:

1. Need to add GPU Temperature to the API.  I have had fans already fail and this is my only indication that is GPU is over-heating.  The increased profit is not worth the risk of burring up a $600 GPU.  ccminer does this already, you can check the code to see where to get the information.

2. Need to add URL to the API.  I switch coins.  I mine multiple coins.  I use the API to double check what each miner is doing.  I need to be able to extract the server name and port from the API (for example: mine.loki.fairpool.xyz:5577).

I also noticed that "gpus" "intensity" is always zero in the API.
sr. member
Activity: 512
Merit: 260
I have 10 rigs and all does this. I had a problim with CCminer 2.3 but using driver .11 fix that.
sr. member
Activity: 512
Merit: 260
T-rex just quite for no reason.

running windows 10 1803, Tried this with driver 398.36 and 398.11.
Updated VS2012 and VS2015
I cleared OC and restarted
VM is set to 8GB per 1070+ 4GB for system.


C:\NemosMiner-master\Bin\NVIDIA-trex>t-rex.exe  -a x17 -o stratum+tcp://x17.mine.zergpool.com:3737 -u 3HrGrXjbtpENu9PgzvjQGp6fNA2WKTrpLZ -p ID=WK3,c=BTC
20180721 17:30:03 T-Rex NVIDIA GPU miner v0.5.1
20180721 17:30:03
20180721 17:30:03 CUDA devices available: 6
20180721 17:30:03 Starting on: x17.mine.zergpool.com:3737
20180721 17:30:04 WARN: New difficulty: 0.1
20180721 17:30:04 x17 block 2360916, diff 3264.509
20180721 17:30:05 WARN: GPU #2: Intensity set to 21, 2097152 cuda threads
20180721 17:30:05 WARN: GPU #5: Intensity set to 21, 2097152 cuda threads
20180721 17:30:05 WARN: GPU #0: Intensity set to 21, 2097152 cuda threads
20180721 17:30:05 WARN: GPU #3: Intensity set to 21, 2097152 cuda threads
20180721 17:30:05 WARN: GPU #4: Intensity set to 21, 2097152 cuda threads
20180721 17:30:05 WARN: GPU #1: Intensity set to 21, 2097152 cuda threads
20180721 17:30:06 [ OK ] 1/1 - 11.97 MH/s
20180721 17:30:06 [ OK ] 2/2 - 33.35 MH/s
20180721 17:30:07 [ OK ] 3/3 - 33.35 MH/s
20180721 17:30:08 [ OK ] 4/4 - 44.32 MH/s
20180721 17:30:10 WARN: New difficulty: 0.15

C:\NemosMiner-master\Bin\NVIDIA-trex>pause
Press any key to continue . . .


C:\NemosMiner-master\Bin\NVIDIA-trex>t-rex.exe  -a lyra2z -o stratum+tcp://lyra2z.mine.zpool.ca:4553 -u 3HrGrXjbtpENu9PgzvjQGp6fNA2WKTrpLZ -p ID=WK3,c=BTC -i 17 -l .\log.log
20180721 17:31:05 T-Rex NVIDIA GPU miner v0.5.1
20180721 17:31:05
20180721 17:31:05 CUDA devices available: 6
20180721 17:31:05 Starting on: lyra2z.mine.zpool.ca:4553
20180721 17:31:06 WARN: New difficulty: 1 (0.00391)
20180721 17:31:06 lyra2z block 32402, diff 531.335
20180721 17:31:06 WARN: GPU #4: Intensity set to 17, 131072 cuda threads
20180721 17:31:06 WARN: GPU #0: Intensity set to 17, 131072 cuda threads
20180721 17:31:06 WARN: GPU #3: Intensity set to 17, 131072 cuda threads
20180721 17:31:06 WARN: GPU #1: Intensity set to 17, 131072 cuda threads
20180721 17:31:06 WARN: GPU #2: Intensity set to 17, 131072 cuda threads
20180721 17:31:06 WARN: GPU #5: Intensity set to 17, 131072 cuda threads
20180721 17:31:08 [ OK ] 1/1 - 5252.35 kH/s
20180721 17:31:10 [ OK ] 2/2 - 7256.21 kH/s
20180721 17:31:13 [ OK ] 3/3 - 9127.28 kH/s
20180721 17:31:13 [ OK ] 4/4 - 11.02 MH/s
20180721 17:31:16 [ OK ] 5/5 - 11.03 MH/s
20180721 17:31:16 GPU #0: 2480.41 kH/s
20180721 17:31:16 GPU #1: 550.03 kH/s
20180721 17:31:16 GPU #2: 2566.01 kH/s
20180721 17:31:16 GPU #3: 2396.55 kH/s
20180721 17:31:16 GPU #4: 2449.55 kH/s
20180721 17:31:16 GPU #5: 588.63 kH/s
20180721 17:31:17 [ OK ] 6/6 - 12.96 MH/s
20180721 17:31:18 [ OK ] 7/7 - 13.05 MH/s
20180721 17:31:19 [ OK ] 8/8 - 13.04 MH/s

C:\NemosMiner-master\Bin\NVIDIA-trex>pause
Press any key to continue . . .


C:\NemosMiner-master\Bin\NVIDIA-trex>t-rex.exe   -a lyra2z -o stratum+tcp://lyra2z.eu.nicehash.com:3365 -u 3HrGrXjbtpENu9PgzvjQGp6fNA2WKTrpLZ.WK3 -p x -i 17 -l .\log.log
20180721 17:34:00 T-Rex NVIDIA GPU miner v0.5.1
20180721 17:34:00
20180721 17:34:00 CUDA devices available: 6
20180721 17:34:00 Starting on: lyra2z.eu.nicehash.com:3365
20180721 17:34:10 WARN: New difficulty: 2 (0.00781)
20180721 17:34:10 lyra2z block 96960, diff 25547.100
20180721 17:34:10 WARN: GPU #5: Intensity set to 17, 131072 cuda threads
20180721 17:34:10 WARN: GPU #3: Intensity set to 17, 131072 cuda threads
20180721 17:34:10 WARN: GPU #4: Intensity set to 17, 131072 cuda threads
20180721 17:34:10 WARN: GPU #2: Intensity set to 17, 131072 cuda threads
20180721 17:34:10 WARN: GPU #0: Intensity set to 17, 131072 cuda threads
20180721 17:34:10 WARN: GPU #1: Intensity set to 17, 131072 cuda threads
20180721 17:34:15 [ OK ] 1/1 - 7387.38 kH/s
20180721 17:34:16 [ OK ] 2/2 - 7387.38 kH/s
20180721 17:34:18 [ OK ] 3/3 - 9440.54 kH/s
20180721 17:34:20 [ OK ] 4/4 - 11.21 MH/s
20180721 17:34:20 [ OK ] 5/5 - 11.21 MH/s
20180721 17:34:20 GPU #0: 2582.61 kH/s
20180721 17:34:20 GPU #1: 2598.58 kH/s
20180721 17:34:20 GPU #2: 559.20 kH/s
20180721 17:34:20 GPU #3: 2610.84 kH/s
20180721 17:34:20 GPU #4: 578.49 kH/s
20180721 17:34:20 GPU #5: 2323.22 kH/s
20180721 17:34:21 [ OK ] 6/6 - 11.20 MH/s

C:\NemosMiner-master\Bin\NVIDIA-trex>pause
Press any key to continue . . .
newbie
Activity: 5
Merit: 0
newbie
Activity: 5
Merit: 0
algo Lyra2z pl 85, cc115, mem 0
Windows 7
Pages:
Jump to: