TECHNOBIT support tread + customer feedback - page 39.

marto74

hero member

Activity: 728

Merit: 500

Quote from: tmu on April 24, 2014, 10:57:56 AM

Hi Marto,

Could You check what is going on with order ref: QDJJUNUDZ?
Order placed 2014-02-15 and chips delivered to You 21.02.2014 or 18.03.2014 depending which delivery date is correct (http://www.trackitonline.ru/ RR085887460FI to Bulgaria).

Thanks,
Tmu

sorry we missed it.
We hava holydays here until 6-th of may.
Your miners will be shipped on 7-th

marto74

hero member

Activity: 728

Merit: 500

We are finishing our design for our first Scrypt mining board

Specs
8 A2 terminator chip board
Hash rate - about 14 Mh/s SCRYPT overclocked in turbo mode
16 bit PIC controller
6 line power suply
Voltage controled by command in the software/firmware
USB connector
2 x 6 pin PCI-e power conectors @ 12 V
power consumtion 150-200 W
2 side heatsinks and fans

There will be also a 4 chip version

WiWi

member

Activity: 83

Merit: 10

Quote

My experience has been good compared to other suppliers and i have had a GOOD experience of others believe me, lost money in the process. Technobits are good designed products, just as usual pricing could be a bit more helpful but i suppose its difficults with smallma rgins. also 8 months is short time for a company to be perfect so in fairness overall good. Smiley

I would like to by more of their products, if they had on board firmware and a lan port,that would be fantastic, something for the next board perhaps. Wink

+1 Smiley
Something like Technobit board and tplink in a box Wink
Apart of the jokes I am very happy Technobit customer
+1 for marto and CO

Please don't, that way every miner needs a network connection. i like it this way, just 1 usb hub for many miners.

tmu

newbie

Activity: 59

Merit: 0

Hi Marto,

Could You check what is going on with order ref: QDJJUNUDZ?
Order placed 2014-02-15 and chips delivered to You 21.02.2014 or 18.03.2014 depending which delivery date is correct (http://www.trackitonline.ru/ RR085887460FI to Bulgaria).

Thanks,
Tmu

marto74

hero member

Activity: 728

Merit: 500

you have PM

dozerz

legendary

Activity: 2242

Merit: 1057

Quote from: dozerz on April 11, 2014, 04:26:24 AM

hi marto, can you check rma NFMZRIWNA. i only got 1 unit back when i sent 2 and now the returned unit has blown, nice puff of blue smoke.

apart from this minor issue my experience with technobit has been good, everything delivered promptly and good communication, looking forward to more orders.

any update here marto? would like to order a 3rd gen avalon but would also like a response to this case, thanks.

Zich

legendary

Activity: 1190

Merit: 1000

Cgminer for windows with Technobit hardware support

Quote from: 2GOOD on April 13, 2014, 05:00:23 PM

The link is updated, and I've made a small How-To here:
https://bitcointalksearch.org/topic/cgminer-windows-build-for-technobits-boards-569689

Please test Wink

best
2GOOD

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Japs2013 on April 13, 2014, 10:26:12 AM

Quote from: loshia on April 13, 2014, 10:17:34 AM

Yes you need alway to do that when you keep yor settings.
Can you share you impressions about this build?
How it works issues if any
10x

It was the 1st time that I experienced this, so I thought it was worth sharing Wink

Until now it's running stable as expected, no problems at all.

That is what I am observing also Wink

Thank you and happy mining

Japs2013

member

Activity: 113

Merit: 10

Quote from: loshia on April 13, 2014, 10:17:34 AM

Yes you need alway to do that when you keep yor settings.
Can you share you impressions about this build?
How it works issues if any
10x

It was the 1st time that I experienced this, so I thought it was worth sharing Wink

Until now it's running stable as expected, no problems at all.

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: Japs2013 on April 13, 2014, 09:59:54 AM

Quote from: marto74 on April 12, 2014, 12:31:29 AM

0.3.2 Avalon 3 release http://technobit.eu/0_3_2.rar
0.3.2 HEX3A3 - Avalon3 board release
* HEX3A3 defaults: --hexminer3-chip-mask 255 --hexminer3-voltage 800 --hexminer3-options 16:7000
* HEX3A3 --hexminer3-options 16:7000 16 is chip count per board and 7000 is desired speed per chip in Mh/s. 7000 equals to 7G per chip.
* cgminer patch to cgminer 4.2.3 rev e574114682fe1edc344b7e291eb9d9497d26ef92.patch
* cgminer bug fixes:HEXa frequent HEXa usb disconnects, fast work queue restart and so on
* openwrt – some compile optimizations for speed which increased image size a bit
* openwrt – dhcp client added finally:)
* openwrt updated to r40449

After upgrading my 3020 to this version - while keeping my configuration - my miner didn't work. It turned out that I manually had to enter the new HEX3A3 settings in the admin.

Yes you need alway to do that when you keep your settings.
Can you share you impressions about this build?
How it works issues if any
10x

Japs2013

member

Activity: 113

Merit: 10

Quote from: marto74 on April 12, 2014, 12:31:29 AM

0.3.2 Avalon 3 release http://technobit.eu/0_3_2.rar
0.3.2 HEX3A3 - Avalon3 board release
* HEX3A3 defaults: --hexminer3-chip-mask 255 --hexminer3-voltage 800 --hexminer3-options 16:7000
* HEX3A3 --hexminer3-options 16:7000 16 is chip count per board and 7000 is desired speed per chip in Mh/s. 7000 equals to 7G per chip.
* cgminer patch to cgminer 4.2.3 rev e574114682fe1edc344b7e291eb9d9497d26ef92.patch
* cgminer bug fixes:HEXa frequent HEXa usb disconnects, fast work queue restart and so on
* openwrt – some compile optimizations for speed which increased image size a bit
* openwrt – dhcp client added finally:)
* openwrt updated to r40449

After upgrading my 3020 to this version - while keeping my configuration - my miner didn't work. It turned out that I manually had to enter the new HEX3A3 settings in the admin.

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: casinocoin on April 12, 2014, 10:36:10 PM

Quote from: Zich on April 12, 2014, 08:33:21 PM

Quote from: casinocoin on April 12, 2014, 04:30:28 PM

Running Hexminer could that be the problem?
As well wn 7 64b

Yup, that's maybe the problem.
You can try cgminer that compile by our friend 2GOOD https://bitcointalksearch.org/topic/m.5903836

Thanks so much for the link gonna set it up in the am!
Peru here I come.

BTC Address?

Happy holiday then Grin

Edit:
Some update from 2GOOD Grin

Quote from: 2GOOD on April 13, 2014, 05:00:23 PM

Yes my bad, wrong binnary

The link is updated, and I've made a small How-To here:
https://bitcointalksearch.org/topic/cgminer-windows-build-for-technobits-boards-569689

Please test Wink

best
2GOOD

casinocoin

legendary

Activity: 849

Merit: 1050

CasinoCoin

Quote from: Zich on April 12, 2014, 08:33:21 PM

Quote from: casinocoin on April 12, 2014, 04:30:28 PM

Running Hexminer could that be the problem?
As well wn 7 64b

Yup, that's maybe the problem.
You can try cgminer that compile by our friend 2GOOD https://bitcointalksearch.org/topic/m.5903836

Thanks so much for the link gonna set it up in the am!
Peru here I come.

BTC Address?

Zich

legendary

Activity: 1190

Merit: 1000

Quote from: casinocoin on April 12, 2014, 04:30:28 PM

Running Hexminer could that be the problem?
As well wn 7 64b

Yup, that's maybe the problem.
You can try cgminer for windows with technobit support https://bitcointalksearch.org/topic/m.5903836

casinocoin

legendary

Activity: 849

Merit: 1050

CasinoCoin

Quote from: loshia on April 12, 2014, 02:18:14 PM

Quote from: TrytoHex on April 12, 2014, 02:10:28 PM

Quote from: casinocoin on April 12, 2014, 11:26:18 AM

Ive got several hex2A miners that will run constantly for approx 12 hours and then either 1 or two will stop hashing while the other continues.
This is fixed by pressing stop and then switching the usb port for each miner and restarting.

Been doing this for over a month now, but am heading on vacation in a few weeks. Going to have my sister stay at my place is there any way to avoid the shut off of the other miners so shes not switching up cords and touching things!

Thanks

What have you got them running on? RPI, Windows pc, mr3020?

Time for cgminer upgrade dude Wink

Running Hexminer could that be the problem?
As well wn 7 64b

loshia

legendary

Activity: 1610

Merit: 1000

Quote from: TrytoHex on April 12, 2014, 02:10:28 PM

Quote from: casinocoin on April 12, 2014, 11:26:18 AM

Ive got several hex2A miners that will run constantly for approx 12 hours and then either 1 or two will stop hashing while the other continues.
This is fixed by pressing stop and then switching the usb port for each miner and restarting.

Been doing this for over a month now, but am heading on vacation in a few weeks. Going to have my sister stay at my place is there any way to avoid the shut off of the other miners so shes not switching up cords and touching things!

Thanks

What have you got them running on? RPI, Windows pc, mr3020?

Time for cgminer upgrade dude Wink

TrytoHex

member

Activity: 86

Merit: 10

Quote from: casinocoin on April 12, 2014, 11:26:18 AM

Ive got several hex2A miners that will run constantly for approx 12 hours and then either 1 or two will stop hashing while the other continues.
This is fixed by pressing stop and then switching the usb port for each miner and restarting.

Been doing this for over a month now, but am heading on vacation in a few weeks. Going to have my sister stay at my place is there any way to avoid the shut off of the other miners so shes not switching up cords and touching things!

Thanks

What have you got them running on? RPI, Windows pc, mr3020?

casinocoin

legendary

Activity: 849

Merit: 1050

CasinoCoin

Ive got several hex2A miners that will run constantly for approx 12 hours and then either 1 or two will stop hashing while the other continues.
This is fixed by pressing stop and then switching the usb port for each miner and restarting.

Been doing this for over a month now, but am heading on vacation in a few weeks. Going to have my sister stay at my place is there any way to avoid the shut off of the other miners so shes not switching up cords and touching things!

Thanks

QuiveringGibbage

hero member

Activity: 617

Merit: 543

http://idontALT.com

Quote from: QuiveringGibbage on April 07, 2014, 11:32:03 AM

Hi marto74,

Thanks for the prompt RMA process. I've received the 2 units back and appreciate your responses to my queries. Nice work on cgminer-4.2.2. Keep up the good work.

Code:

 0: HEX8 0       : 270 1000/1005mV         | 514.8G / 262.8Gh/s
 1: HEX8 1       : 270 1000/ 999mV         | 17.38G / 249.6Gh/s
 2: HEX8 2       : 270 1000/1008mV         | 368.9G / 259.6Gh/s
 3: HEX8 3       : 270 1000/ 999mV         | 267.0G / 266.0Gh/s

Pics can be found http://imgur.com/a/mRbMZ#hGO5lYO

Cheers,
QG

Zich

legendary

Activity: 1190

Merit: 1000

For Rpi

Code:

1. sudo aptitude update
2. sudo aptitude upgrade
3. sudo aptitude install libudev-dev libusb-1.0-0-dev libfox-1.6-dev 
4. sudo aptitude install autotools-dev autoconf automake 
5. sudo aptitude install libtool libncurses-dev yasm 
6. sudo aptitude install curl libcurl4-openssl-dev libjansson-dev screen
7. sudo aptitude install pkg-config uthash-dev make git-core

For Ubuntu

Code:

1. sudo apt-get update
2. sudo apt-get upgrade
3. sudo apt-get install libudev-dev libusb-1.0-0-dev libfox-1.6-dev 
4. sudo apt-get install autotools-dev autoconf automake 
5. sudo apt-get install libtool libncurses-dev yasm 
6. sudo apt-get install curl libcurl4-openssl-dev libjansson-dev screen
7. sudo apt-get install pkg-config uthash-dev make git-core

Download cgminer 4.2.3

Code:

1. git clone https://github.com/ckolivas/cgminer.git
2. mv cgminer cgminer-4.2.3
3. cd cgminer-4.2.3
4. git checkout e574114682fe1edc344b7e291eb9d9497d26ef92
5. wget https://www.dropbox.com/s/ugg6nczel6hqmr6/e574114682fe1edc344b7e291eb9d9497d26ef92.patch
6. patch -p1 < e574114682fe1edc344b7e291eb9d9497d26ef92.patch
7. ./autogen.sh --enable-hexminera --enable-hexminerc --enable-hexminer3 --enable-hexminerb --enable-hexmineru --enable-hexminer8
8. make

Code:

{
"pools" : [
        {
                "url" : "stratum+tcp://stratum-lb-usa48.btcguild.com:3333",
                "user" : "user",
                "pass" : "123"
        }
]
,
"api-listen" : true,
"api-allow" : "R:127.0.0.1",
"api-mcast-port" : "4028",
"api-port" : "4028",
"expiry" : "120",
"hotplug" : "5",
"log" : "5",
"no-pool-disable" : true,
"queue" : "1",
"scan-time" : "60",
"shares" : "0",
"hexminera-voltage" : "1460",
"hexminera-options" : "16:480",
"hexminerc-voltage" : "1100",
"hexminerc-options" : "16:1500",
"hexminer3-voltage" : "750",
"hexminer3-options" : "16:7000",
"hexminer3-chip-mask" : "255",
"hexminerb-voltage" : "900",
"hexminerb-options" : "16:540",
"hexminer8-set-diff-to-one" : "0",
"hexminer8-chip-mask" : "255",
"hexminer8-voltage" : "1005",
"hexminer8-options" : "8:260",
"hexmineru-frequency" : "54",
"set_default_to_8" : true,
"kernel-path" : "/usr/local/bin"
}

Topic: TECHNOBIT support tread + customer feedback - page 39. (Read 62586 times)