where is my DGB ? 41k+ . there is in the pool, but no in the blockchain .
Are there representatives of the pool?
Topic: The Blocks Factory - Multicoin pool - page 12. (Read 198134 times)
URL: s1.theblocksfactory.com:9004
Worker: {userid}.{workername}_diff8192
Password:
I have an L3+ right now I have the diff set to 8192. That puts my sharerate between .9 - .98 (that is the best I've gotten so far) When I look at my antminer stat page I get a high amt of accepted with a low occurrence of rejected shares. However the amt of discarded shares is still kind of high. If anyone know of a better configuration pls lmk.
Worker: {userid}.{workername}_diff8192
Password:
I have an L3+ right now I have the diff set to 8192. That puts my sharerate between .9 - .98 (that is the best I've gotten so far) When I look at my antminer stat page I get a high amt of accepted with a low occurrence of rejected shares. However the amt of discarded shares is still kind of high. If anyone know of a better configuration pls lmk.
i dont understand how to sett low diff do you type it into the website as well as your miner software eg. cgminer the username.lowdiff_46373
the difficulity right now 80909 is too high and is causing my miners to fail a lot of shares??
someone help
that's what I can, can help . " 2084 878.49 GH/s 26.66 GH/s(2.9%) 446.31 Shares/sec 73937.6 s1.theblocksfactory.com:9004 " the difficulity right now 80909 is too high and is causing my miners to fail a lot of shares??
someone help
where is my DGB ? 41k+ . there is in the pool, but no in the blockchain .
Hi,
I have L3+ - one piece
connected dgb-scrypt.theblocksfactory.com
help with settings
now
Devices 4
difficulty 32768
It may be - necessary number of devices, correct to 1 ?
and it is possible to correct the parameter difficulty ?
Help me please!
I have L3+ - one piece
connected dgb-scrypt.theblocksfactory.com
help with settings
now
Devices 4
difficulty 32768
It may be - necessary number of devices, correct to 1 ?
and it is possible to correct the parameter difficulty ?
Help me please!
I also have an L3+ I have set number of devices to 1 and I left the diff. Undefined which I'm assuming is vardiff. Although I'm not sure which is better - vardiff or fixed. In any case if someone can help me understand how to set the diff. I would really appreciate it ☺
**edit**Well I managed to figure out how to set a fixed difficulty. The only thing I'm having a hard time understanding is when i lower the diff my share rate goes up. I don't understand what effect this has on me or the pool. I'm not sure which is better, low diff high share rate or high diff low share rate? High share rate is good, right? I know the diff shouldn't be too high but is there a too low?**edit**
i would like to know a setup too, this moment i get very low hashrates on the pool, but on my miners page everything looks ok. i searched on the internet and found nothing about my problem and why is getting started blank on the poolsite? giving it another 24-36 hours, and then gonna move out if things go the same away
Please advice what to do.
I have created an account and I am trying to reset the password.
I get the email with account and temporary password but when I try to login with those credentials it says user or password is invalid.
I have done it several times?
What to do?
Est-
I have created an account and I am trying to reset the password.
I get the email with account and temporary password but when I try to login with those credentials it says user or password is invalid.
I have done it several times?
What to do?
Est-
Hi,
I have L3+ - one piece
connected dgb-scrypt.theblocksfactory.com
help with settings
now
Devices 4
difficulty 32768
It may be - necessary number of devices, correct to 1 ?
and it is possible to correct the parameter difficulty ?
Help me please!
I have L3+ - one piece
connected dgb-scrypt.theblocksfactory.com
help with settings
now
Devices 4
difficulty 32768
It may be - necessary number of devices, correct to 1 ?
and it is possible to correct the parameter difficulty ?
Help me please!
I also have an L3+ I have set number of devices to 1 and I left the diff. Undefined which I'm assuming is vardiff. Although I'm not sure which is better - vardiff or fixed. In any case if someone can help me understand how to set the diff. I would really appreciate it ☺
**edit**Well I managed to figure out how to set a fixed difficulty. The only thing I'm having a hard time understanding is when i lower the diff my share rate goes up. I don't understand what effect this has on me or the pool. I'm not sure which is better, low diff high share rate or high diff low share rate? High share rate is good, right? I know the diff shouldn't be too high but is there a too low?**edit**
OK, what a newbie I am!
Just mined overnight for account "antminer"
Whoever owns that account got lucky I guess. lol
That's what I get for being in a hurry.
New user, please help with setup.
Antminer s9, 13T
My antminer shows I am connected, but the mining dashboard shows ZERO hashrate.
What difficulty should I use?
Why is my miner hashing but NOT showing up in dashboard? : )
My current settings:
s1.theblocksfactory.com:9001
DigiSan.miner_diff16384
x
Is there a tutorial somewhere on how to properly set up asic miners?
Does it take a while to show in the stats maybe?
Any suggestions would be greatly appreciated!
Thank you
Best regards.
Antminer s9, 13T
My antminer shows I am connected, but the mining dashboard shows ZERO hashrate.
What difficulty should I use?
Why is my miner hashing but NOT showing up in dashboard? : )
My current settings:
s1.theblocksfactory.com:9001
DigiSan.miner_diff16384
x
Is there a tutorial somewhere on how to properly set up asic miners?
Does it take a while to show in the stats maybe?
Any suggestions would be greatly appreciated!
Thank you
Best regards.
New user, please help with setup.
Antminer s9, 13T
My antminer shows I am connected, but the mining dashboard shows ZERO hashrate.
What difficulty should I use?
Why is my miner hashing but NOT showing up in dashboard?
My current settings:
s1.theblocksfactory.com:9001
DigiSan.miner_diff16384
x
Is there a tutorial somewhere on how to properly set up asic miners?
Any suggestions would be greatly appreciated!
Thank you
Best regards.
Antminer s9, 13T
My antminer shows I am connected, but the mining dashboard shows ZERO hashrate.
What difficulty should I use?
Why is my miner hashing but NOT showing up in dashboard?
My current settings:
s1.theblocksfactory.com:9001
DigiSan.miner_diff16384
x
Is there a tutorial somewhere on how to properly set up asic miners?
Any suggestions would be greatly appreciated!
Thank you
Best regards.
Quick Question...
I have been having an issue with The Blocks Factory reducing my hash rate by almost 30% for the last 2 days. It happens and stay like that for hours then it goes back to normal. (When I check my ant miners the hash rate is where it should be) but TBF shows a much lower hash rate (-30%)
Is anyone else having this issue? How can it be fixed? Thanks
I have been having an issue with The Blocks Factory reducing my hash rate by almost 30% for the last 2 days. It happens and stay like that for hours then it goes back to normal. (When I check my ant miners the hash rate is where it should be) but TBF shows a much lower hash rate (-30%)
Is anyone else having this issue? How can it be fixed? Thanks
I am having the same issue, but TBF is reducing my hashrate from 2600 MH/s (Scrypt) to 675 MH/s. This seems utterly ridiculous to me.
I'm so frustrated with this pool that I'm probably going to set up my own private pool. I don't trust the stats, the block time is really bad in some cases (over 1 hour to find a block pretty regularly).
I don't know what's going on with this pool but I suspect that something is severely broken.
Yes, I have 12.8GH/s and getting only around 9 - This is just crazy and just no support from them. If anyone had a contact info for support please let me know. I wrote to their twitter account but no response from them.
Quick Question...
I have been having an issue with The Blocks Factory reducing my hash rate by almost 30% for the last 2 days. It happens and stay like that for hours then it goes back to normal. (When I check my ant miners the hash rate is where it should be) but TBF shows a much lower hash rate (-30%)
Is anyone else having this issue? How can it be fixed? Thanks
I have been having an issue with The Blocks Factory reducing my hash rate by almost 30% for the last 2 days. It happens and stay like that for hours then it goes back to normal. (When I check my ant miners the hash rate is where it should be) but TBF shows a much lower hash rate (-30%)
Is anyone else having this issue? How can it be fixed? Thanks
I am having the same issue, but TBF is reducing my hashrate from 2600 MH/s (Scrypt) to 675 MH/s. This seems utterly ridiculous to me.
I'm so frustrated with this pool that I'm probably going to set up my own private pool. I don't trust the stats, the block time is really bad in some cases (over 1 hour to find a block pretty regularly).
I don't know what's going on with this pool but I suspect that something is severely broken.
Quick Question...
I have been having an issue with The Blocks Factory reducing my hash rate by almost 30% for the last 2 days. It happens and stay like that for hours then it goes back to normal. (When I check my ant miners the hash rate is where it should be) but TBF shows a much lower hash rate (-30%)
Is anyone else having this issue? How can it be fixed? Thanks
I have been having an issue with The Blocks Factory reducing my hash rate by almost 30% for the last 2 days. It happens and stay like that for hours then it goes back to normal. (When I check my ant miners the hash rate is where it should be) but TBF shows a much lower hash rate (-30%)
Is anyone else having this issue? How can it be fixed? Thanks
Hi,
I have L3+ - one piece
connected dgb-scrypt.theblocksfactory.com
help with settings
now
Devices 4
difficulty 32768
It may be - necessary number of devices, correct to 1 ?
and it is possible to correct the parameter difficulty ?
Help me please!
I have L3+ - one piece
connected dgb-scrypt.theblocksfactory.com
help with settings
now
Devices 4
difficulty 32768
It may be - necessary number of devices, correct to 1 ?
and it is possible to correct the parameter difficulty ?
Help me please!
It dropped to 10% the Digibyte Scrypt algo hashrate and my miners are rarely getting new job. The problem is on the server side! Please investigate it!
I tried to connect my antminer L3+ to your scrypt pool using your defined stratum settings and it would not connect. Why is this?
Yes! Profit from the day before suddenly became very bad ~
website seem slow since yesterday, anyone else ?
For Baikal Giant X10 which difficultis the best for more dgb?
I can´t see a difference between 4 or 8?
Thx
I can´t see a difference between 4 or 8?
Thx
my balance isnt updating, looks like a few others are having this problem as well ?
update: sry looks like its working now
update: sry looks like its working now
Jump to: