The Blocks Factory - Multicoin pool - page 20.

omshree

full member

Activity: 270

Merit: 100

Quote from: NateTGreat on December 17, 2017, 09:20:48 AM

Ok, I am on the pool now at ~ 54 TH/s. My questions now are, about what is the expected reward? I.e. how many digibyte will I receive /TH/Day. According to whattomine.com, 54 TH should be pulling in about 7,400 DGB/day, yet my pool stats show around 2,500/day. Will this change the longer I am connected to the pool? Other miners @ 54 TH are mining about 5,500 DGB/day, which is still 1,900 less than whattomine.com projects. Do I need to set a higher difficulty to receive more reward? I am just trying to see if this is more profitable than mining other coins at the moment. I believe in the long-term value of Digibyte, but I also want to follow day-to-day profitability. Thanks

Same here, pool stats are way off from WTM, how is that?

edit: WTM is showing it as lagging.

NateTGreat

newbie

Activity: 26

Merit: 0

Ok, I am on the pool now at ~ 54 TH/s. My questions now are, about what is the expected reward? I.e. how many digibyte will I receive /TH/Day. According to whattomine.com, 54 TH should be pulling in about 7,400 DGB/day, yet my pool stats show around 2,500/day. Will this change the longer I am connected to the pool? Other miners @ 54 TH are mining about 5,500 DGB/day, which is still 1,900 less than whattomine.com projects. Do I need to set a higher difficulty to receive more reward? I am just trying to see if this is more profitable than mining other coins at the moment. I believe in the long-term value of Digibyte, but I also want to follow day-to-day profitability. Thanks

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: NateTGreat on December 17, 2017, 06:39:57 AM

Looking to set up x4 s9 on the pool. What are your estimations on daily dgb for 54 Th/s? Also, I tried using the stratum posted, but it said pool was dead. What did I do wrong? Do I need to put a difficulty? I am just using the antminer firmware to connect to pool. Please tell me what I need to enter in order to connect and start mining! Thank you!

Check the pool url : s1.theblocksfactory.com:9001
Check that the username on the antminer s9 match the Username.Worker on the worker page.

I have a lot of bad username in the pool log:
Exemple 1 : miner try to connect with USERNAME but it must be USERNAME.WorkerName
Exemple 2 : Username.Miner but the username doesn't exist
Exemple 3 : A bitcoin address or a DGB address as username.

NateTGreat

newbie

Activity: 26

Merit: 0

Looking to set up x4 s9 on the pool. What are your estimations on daily dgb for 54 Th/s? Also, I tried using the stratum posted, but it said pool was dead. What did I do wrong? Do I need to put a difficulty? I am just using the antminer firmware to connect to pool. Please tell me what I need to enter in order to connect and start mining! Thank you!

omshree

full member

Activity: 270

Merit: 100

thanx, will try

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: omshree on December 17, 2017, 02:05:10 AM

Is vardiff set by default? Using S9 miners, got a lot of rejected shares.

Yes, Try to put _diff8192 or _diff16384 --> Username.workername_diff16384

omshree

full member

Activity: 270

Merit: 100

Is vardiff set by default? Using S9 miners, got a lot of rejected shares.

lucazane

legendary

Activity: 1198

Merit: 1000

BAIKAL GIANT X10 Best practices :

Define one worker per miner
Use fixed diff. Ex : Username.workername_diffXXXXX

Recommended Difficulty per miner :

Groeslt : 4 or 8 --> Username.workername_diff8
Qubit : 4 or 8 --> Username.workername_diff8
Skein : Not tested

Post your result to help others find the best setting.

With the blocktime of DGB(15 sec), rejected shares of <5 % in average is ok.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: NormanFoxLee on December 16, 2017, 09:41:04 AM

Quote

Can you check again, your IP is part of a reported subnet hosting a lot of scan bot : http://www.mddcore.com/botnets.php 108.192.0.0/10

Oh, this limits in PM...

Now it is working. This range is just a regular address of AT&T network... Well, I hope letting me in will not harm your pool...

No I thing this list is a little too restrictive

NormanFoxLee

newbie

Activity: 1

Merit: 0

Quote

Can you check again, your IP is part of a reported subnet hosting a lot of scan bot : http://www.mddcore.com/botnets.php 108.192.0.0/10

Oh, this limits in PM...

Now it is working. This range is just a regular address of AT&T network... Well, I hope letting me in will not harm your pool...

lucazane

legendary

Activity: 1198

Merit: 1000

IF you are unnable to connect to the website, PM me with your IP.

Fenrir31

newbie

Activity: 2

Merit: 0

Hi,

same problem for me, I couldn't access the website, but my ftc miner (on same IP) was working fine.
I can't reply to your PM lucazane (1 PM by hour limit). Thank you for solving my problem quickly.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: ?? on ??

why would my ip be banned...?
is that automatically done or what?
as am at work now and i have been able to view your site for past weeks...

The IP of your miner isn't banned but it seems that you cannot access the website from your current location but I need the IP to unban.

You may have been banned automatically on our side because we had to strengthen our ban policy because of a big DDoS for 2 days now.
We will adjust the ban policy to work better.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: ?? on ??

i can only send i PM per hour Sad

so.. all i can see is

This site can’t be reached
dgb-skein.theblocksfactory.com took too long to respond.
Try:

Checking the connection
Checking the proxy and the firewall
Running Windows Network Diagnostics
ERR_CONNECTION_TIMED_OUT

Your IP is banned but the IP you gave me in PM isn't :/

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: ?? on ??

cant log in Sad

F5, if it doesn't work PM

Blaz

newbie

Activity: 3

Merit: 0

Quote from: lucazane on December 15, 2017, 12:45:18 PM

Quote from: Blaz on December 15, 2017, 12:44:16 PM

Quote from: lucazane on December 15, 2017, 12:35:01 PM

Quote from: b2100 on December 15, 2017, 11:48:03 AM

I can´t log in from where I currently am (Spain) or via my pcs back home in the UK I get "The connection has timed out" errors.

Any ideas why ?

Thanks

send me your IP in private

Quote from: Blaz on December 15, 2017, 12:06:17 PM

not able to login from norway? 404 not found nginx/1.6.2 (Ubuntu)

What pool ?

skein

Try F5.
We updated the login page.

Oh.. works now ty.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: Blaz on December 15, 2017, 12:44:16 PM

Quote from: lucazane on December 15, 2017, 12:35:01 PM

Quote from: b2100 on December 15, 2017, 11:48:03 AM

I can´t log in from where I currently am (Spain) or via my pcs back home in the UK I get "The connection has timed out" errors.

Any ideas why ?

Thanks

send me your IP in private

Quote from: Blaz on December 15, 2017, 12:06:17 PM

not able to login from norway? 404 not found nginx/1.6.2 (Ubuntu)

What pool ?

skein

Try F5.
We updated the login page.

Blaz

newbie

Activity: 3

Merit: 0

Quote from: lucazane on December 15, 2017, 12:35:01 PM

Quote from: b2100 on December 15, 2017, 11:48:03 AM

I can´t log in from where I currently am (Spain) or via my pcs back home in the UK I get "The connection has timed out" errors.

Any ideas why ?

Thanks

send me your IP in private

Quote from: Blaz on December 15, 2017, 12:06:17 PM

not able to login from norway? 404 not found nginx/1.6.2 (Ubuntu)

What pool ?

skein

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: b2100 on December 15, 2017, 11:48:03 AM

I can´t log in from where I currently am (Spain) or via my pcs back home in the UK I get "The connection has timed out" errors.

Any ideas why ?

Thanks

send me your IP in private

Quote from: Blaz on December 15, 2017, 12:06:17 PM

not able to login from norway? 404 not found nginx/1.6.2 (Ubuntu)

What pool ?

Blaz

newbie

Activity: 3

Merit: 0

not able to login from norway? 404 not found nginx/1.6.2 (Ubuntu)

Topic: The Blocks Factory - Multicoin pool - page 20. (Read 198348 times)