Does anyone have a chart for GPUs using groestl?
If needed, I can donate DGB for whoever posts it. (I would love if it has the top 5 NVidia and AMD please)
Topic: The Blocks Factory - Multicoin pool - page 18. (Read 198285 times)
did 16384 comes as the default when you added your s9?
I just added some s9's and the default diff is set to 65536 - giving me only 0.04S/s.
What are your s9's sharing at?
I just added some s9's and the default diff is set to 65536 - giving me only 0.04S/s.
What are your s9's sharing at?
I've got an antminer s9 running and getting pretty high rejection rate (20%). It's on vardiff and been at 16384. Should i set it to manualy difficulty at 16384? Or manually set it to half that (8192)?
What settings are people getting best hashrates using for their S9?
I don't have a sha256 miner so I can't test.What settings are people getting best hashrates using for their S9?
But the average rejection rate is 4.3% for the sha pool so 20% is too high.
You should try different manual difficulty for at least one hour each time.
Keep in mind that the further you are from the pool, the more reject you will have.
I've got an antminer s9 running and getting pretty high rejection rate (20%). It's on vardiff and been at 16384. Should i set it to manualy difficulty at 16384? Or manually set it to half that (8192)?
What settings are people getting best hashrates using for their S9?
What settings are people getting best hashrates using for their S9?
Hi, my digibyte withdrawal is 0 tx_id and it not sending to the payout address... What can I do about this?
PM me with account infoif you have the same problem pm me.
My S7 crashes after 2-3 while mining digibyte and I have to unpkug it. This happens 2 times from the first day on this pool. Does anyone experience the same problem ?
Hi, my digibyte withdrawal is 0 tx_id and it not sending to the payout address... What can I do about this?
Same problem here, though my withdrawal has what looks like a valid transaction ID, but it hasn’t hit the blockchain yet - I guess there’s a problem with payouts today
let’s hope it fixed quicklySide note: does anyone have a recommendation for a more reliable DGB pool?
Looks like the pool owner doesnt care about his pool and our problems/questions. Thats why I dont use it anymore.
I couldnt connect to the official digibyte pool. Is there another one ?
Looks like the pool owner doesnt care about his pool and our problems/questions. Thats why I dont use it anymore.
Hi, my digibyte withdrawal is 0 tx_id and it not sending to the payout address... What can I do about this?
Hi,
I would ask you what to specify here:
Devices
for antminer s7??
Thanks!
I would ask you what to specify here:
Devices
Quote
Setting the number of devices (graphic cards, asics, fpga) behind your worker can help the vardiff algorithm to set a good diff : [VARDIFF]
for antminer s7??
Thanks!
noone will help me?
I need this info too
Hey guys, new miner here. I'm using an AMD Radeon RX 480 graphics card to mine, and using sgminer as its the only one i can get to work atm with the following in my bat file
I average 37mh/s which seems awful low to me. i ran it all night and got 1 dgb. is there something im doing wrong?
Code:
sgminer.exe -k myriadcoin-groestl -o stratum+tcp://stratum.dgb-groestl.theblocksfactory.com:9003 -u user.worker -p pass -I 20
I average 37mh/s which seems awful low to me. i ran it all night and got 1 dgb. is there something im doing wrong?
Could someone explain what the difficulty setting actually does? I'm using an Innosillicon A4+ to try and scrypt mine DGB, but have no idea what adding a difficulty number does or what number I should even try adding. Thanks.
Good afternoon.
I have been playing around with difficulty but still look like I am producing a very low output. I am running TWO Bitmain L3+
_diff2048 is current setting.
Devices difficulty Active Valid hahsrate Invalid hahsrate Sharerate
4 131072 Y 440.36 MH/s 12.07 MH/s(2.67%) 0.06 S/s
4 61400 Y 638.63 MH/s 33.91 MH/s(5.04%) 0.18 S/s
Block Payout
5797110 1.92171727
I would appreciate any assistance with this as well as an explanation to the group if possible.
Whattomine says my daily mining for Digibyte should be 700-800 Digibyte.
Blocksfactory says: 933.09 MH/s 181.012 Digibyte per day.
Thank you in advance.
I have been playing around with difficulty but still look like I am producing a very low output. I am running TWO Bitmain L3+
_diff2048 is current setting.
Devices difficulty Active Valid hahsrate Invalid hahsrate Sharerate
4 131072 Y 440.36 MH/s 12.07 MH/s(2.67%) 0.06 S/s
4 61400 Y 638.63 MH/s 33.91 MH/s(5.04%) 0.18 S/s
Block Payout
5797110 1.92171727
I would appreciate any assistance with this as well as an explanation to the group if possible.
Whattomine says my daily mining for Digibyte should be 700-800 Digibyte.
Blocksfactory says: 933.09 MH/s 181.012 Digibyte per day.
Thank you in advance.
hello am looking for software or website to monitor my Antminers the running on the BlockFactory pool ?
Will I even be able to earn anything with 400 kh/s? I have a gridseed orb ASIC but it's pretty slow. It can mine in Scrypt and sha256. The 400 kh is for scrypt, I can't get it to run in sha256, I'm pretty new to all this mining stuff, so I apologize if they're dumb questions.
Hi Everyone. Just joined the DGB mining community. I have 2 Baikal 150MH/s mini miners that I have added to the pool.
Hopefully mining this coin will be fun. I am new to mining and look forward to this.
Does anyone know if there is any special configuration i need to do with these miners or just put the pool address . username, and password in?
Hopefully mining this coin will be fun. I am new to mining and look forward to this.
Does anyone know if there is any special configuration i need to do with these miners or just put the pool address . username, and password in?
Hi, I'm the admin for Maxcoin Project. I just followed you guys on twitter .. I'm @getmaxcoin on twitter.
Anyway, I was wondering if you could please add maxcoin?
Let me know if you do so I can add you to our maxcoin mining pool page.
https://www.maxcoinproject.org/maxcoin-mining-pools
Anyway, I was wondering if you could please add maxcoin?
Let me know if you do so I can add you to our maxcoin mining pool page.
https://www.maxcoinproject.org/maxcoin-mining-pools
Can someone please assist with pool mining at theblocksfactory.com with a Bitmain L3+ ASIC running Scrypt.
I am NOT getting good results.
Setup:
stratum+tcp://s1.theblocksfactory.com:9004
Status Diff GetWorks Priority Accepted Nonce# DiffA# DiffR# DiffS#
Alive 65.5K 145 0 159 58,196 15,532,032 458,752 0
Rejected Discarded Stale LSDiff LSTime
5 1,232 0 65,536 0:00:03
159/1232 is a really low number.
Thank you in advance.
I am NOT getting good results.
Setup:
stratum+tcp://s1.theblocksfactory.com:9004
Status Diff GetWorks Priority Accepted Nonce# DiffA# DiffR# DiffS#
Alive 65.5K 145 0 159 58,196 15,532,032 458,752 0
Rejected Discarded Stale LSDiff LSTime
5 1,232 0 65,536 0:00:03
159/1232 is a really low number.
Thank you in advance.
maybe look at manually setting difficulty -look at rejcted
my one S9 with 1 broken board has found 5 blocks in 2 days...
Jump to: