Topic: The Blocks Factory - Multicoin pool - page 19. (Read 198348 times)

Can someone please assist with pool mining at theblocksfactory.com with a Bitmain L3+ ASIC running Scrypt.

I am NOT getting good results.

Setup:
stratum+tcp://s1.theblocksfactory.com:9004

Status    Diff    GetWorks    Priority    Accepted      Nonce#    DiffA#    DiffR#    DiffS#      

Alive        65.5K   145            0             159                         58,196        15,532,032    458,752      0                   
 
Rejected    Discarded    Stale      LSDiff    LSTime
   5               1,232         0           65,536    0:00:03

159/1232 is a really low number.

Thank you in advance.

hi m8,

changing the intensity didnt work out well for me.. it only gave me a lot of time the gpu didn't do anything.

did you change the amount of gpu's in the workers page to 1?

I'm pretty sure its PPLNS so you need patience ...

Hi furian, i've switched myself to skein also today.

running a gtx 1080 3gb with default ccminer parameters same url as you

Only running on 243mh/s now. Tried to change the intensity, 20 is still best for me with 1 thread.


GPU only on 0-20 %, no clue how to fix that, any suggestions.

hi all,

started with ccminer and skein today on dbg. just wondering what the best settings are for mining with my gtx 1070.

this is what i use atm.

ccminer-x64.exe -a skein -o stratum+tcp://stratum.dgb-groestl.theblocksfactory.com:9002 -u furian88.2 -p x


seeing that a 1080ti from 2 posts above makes over 1000mh/s and i'm only getting 389 i wonder if there is something i could change to get better mh/s.

thanks in advance!

Hello,
 New miner, but I have some power behind me (10 S9's and 10S4's) and putting together about 5 GPU rigs.
 
 I have been playing with difficulty settings all day trying to determine why I am not getting the same coins per Ths that the top 15 on the leader boards are getting. About the best happy spot I have found was from previous advice on the board of a bit over 8,000. But at best, I am getting 48-52 coins per Th and the leaders are getting consistently 73. That is a pretty big "leave" on the table. How can I optimize this number more efficiently?

 Really just trying to figure out if I should stay here or go play with Bitcoin Cash The calculators say the ROI is here, but my numbers are not showing that. They would be if I was getting a better coin per Th rate though.

Thanks

Hello all!
Started mining DGB (Skein) 7 days ago and almost configured everything to work perfectly. My GPU is 1080TI Seahawk X. Do you think it can perform better? Do I need to make a fixed difficulty or leave it changing? I get 50-70 invalid shares per hour.

Image: https://ibb.co/dtff0R

Do you know how i can go on the skein algorithm? It doesnt seem to work.. I think i have the wrong code?
Could you perhaps help me?

Don't use groestl, that is ASIC territory now. If you want to mine DGB with GPU you need to do it through Skein algorithm.

Hello, im not getting any confirmations on groestl dgb mining pool. it doesnt show on the stats either. do i have wrong version or something? I've used the version of "getting started" in the middle of the page. for NVIDIA mining


C:\Users\Skaffz\Desktop\ccminer-1.2-x15-windows>ccminer.exe --algo=myr-gr -o stratum+tcp://stratum.dgb-groestl.theblocksfactory.com:9003 -u skaffz.worker1 -p x
     *** ccMiner for nVidia GPUs by Christian Buchner and Christian H. ***
                     This is version 1.2 (beta)
          based on pooler-cpuminer 2.3.2 (c) 2010 Jeff Garzik, 2012 pooler
          based on pooler-cpuminer extension for HVC from
               https://github.com/heavycoin/cpuminer-heavycoin
                        and
               http://hvc.1gh.com/
        Cuda additions Copyright 2014 Christian Buchner, Christian H.
          LTC donation address: LKS1WDKGED647msBQfLBHV3Ls8sveGncnm
          BTC donation address: 16hJF5mceSojnTD3ZTUDqdRhDyPJzoRakM
          YAC donation address: Y87sptDEcpLkLeAuex6qZioDbvy1qXZEj4
[2017-12-20 15:33:42] Starting Stratum on stratum+tcp://stratum.dgb-groestl.theblocksfactory.com:9003
[2017-12-20 15:33:42] 1 miner threads started, using 'myr-gr' algorithm.
[2017-12-20 15:33:43] Stratum detected new block
[2017-12-20 15:33:50] GPU #0: GeForce GTX 970, 168.77 khash/s
[2017-12-20 15:33:53] Stratum detected new block
[2017-12-20 15:33:54] GPU #0: GeForce GTX 970, 179.12 khash/s
[2017-12-20 15:34:07] Stratum detected new block
[2017-12-20 15:34:07] GPU #0: GeForce GTX 970, 197.38 khash/s

Hi,

I have recently started mining and have been part of your pool for 1 1/2 Months and am enjoying it so far. I was mining with a 4 GPU RIG initially  (1080 TI) and was getting around 600 Mh/s per GPU. Having added another 4 GPU's to the same rig I am getting a way lower hash rate accross the board (averaging somewhere around 450 Mh/s). Funnily enough this decrease was only present when mining via SKein DGB. For example mining zen cash on ZEC Miner I am still getting the same performance accross all cards ( avg. 700 sol/s).

Please help, as I want to carry on with mining DGB in your pool

Thank you for any suggestions or help.

Kindest regards,

Ru5ki

Hi,

I'm new miner in blockfactory pool.

I'm mining with a knc neptune(sha256) digibyte. Any advices to set the number of devices for vardiff optimisation?
I have 5 cubes.. just have to put 5 devices or count the numbers of asic processors ?

Thanks.

Best Regards

Hi,

I've started mining today so i registered at theblocksfactory, created my worker and started cpu mining on my 12 cpu server. (So yeah, CPU mining..).
But when I want to look at the hashrates from my worker (even after an hour or so) it says N/A and 0's everywhere. Does anyone know what is going on?

My server seems to be mining just fine.

[2017-12-19 15:35:41] sha256d block 5754854, diff 242957748.348
[2017-12-19 15:35:41] CPU #2: 2163.97 kH, 3414.99 kH/s
[2017-12-19 15:35:41] CPU #1: 1704.55 kH, 2690.98 kH/s
[2017-12-19 15:35:41] CPU #3: 1517.00 kH, 2394.13 kH/s
[2017-12-19 15:35:41] CPU #10: 1801.46 kH, 2843.23 kH/s
[2017-12-19 15:35:41] CPU #4: 2146.03 kH, 3386.77 kH/s
[2017-12-19 15:35:41] CPU #9: 2071.17 kH, 3269.38 kH/s
[2017-12-19 15:35:41] CPU #8: 1901.43 kH, 3000.86 kH/s
[2017-12-19 15:35:41] CPU #6: 2461.54 kH, 3885.21 kH/s
[2017-12-19 15:35:41] CPU #11: 2454.68 kH, 3874.42 kH/s
[2017-12-19 15:35:41] CPU #7: 1998.44 kH, 3154.47 kH/s
[2017-12-19 15:35:41] CPU #0: 2009.88 kH, 3172.07 kH/s
[2017-12-19 15:35:41] CPU #5: 1927.32 kH, 3041.49 kH/s

If anyone could tell me what I can do about this please let me know!

Thanks in advance!

Hi

Any chance to offer an XMR(Monero) pool ?    xmr.theblocksfactory.com   

+

Will you revive the vtc pool in a near future ?

Thanks!

Hello lucazane, are you sure "8" is a good number? When I was mining with VarDiff, the pool assigned me a difficulty around 5000. "MyName.1_diff5000" is no good idea?

Another question: What should I enter at "Devices" for 1 Baikal X10. The Baikal has 3 hasboards... so maybe "3" is good?

Also please confirm MyName.1_diff8 is correct.

Thanks in advance

I'm quite new to mining and playing around with gpu's(hardware in general). I started mining to learn faster about gpu's and the technology behind ico's. I try to search as much as possible for myself.

What i've running.

DGB groestl pool - Geforce GTX 1060 3GB - CC miner with default settings

I've overclocked my gpu a little bit to 1861MHz and this gives me a pretty stable 42-43MH/s for every accepted share.

Can anybody give me a indication what i can expect as average mining reward a day, so i can figure out if i'm doing things wrong at the moment.

Any help would be appreciated.

@lucazane I am unable to reply to private messages, but thanks for getting that fixed very quickly. Here is my DGB address as requested in PM. Thanks again!

DGB address: DUJAFWwv7vxN6BYBLrpJJ62SsFu8k98uJf

Hello, what is the best attitude for the Baikal X10 MIner with Myriad-Gröstl please? Must be set differently here the diff  ?

Does this site have a contact I can reach out to concerning a security issue? Inadvertantly discovered something while mining on the DGB pool

Well, I had x4 S9 miners running around 52 TH/s on this pool this morning and only made around 375 DGB. This is grossly less than what was expected from whattomine.com

I am not sure if I was doing anything wrong, but I feel that this output is way too low. According to the pool statistics, I should be making around 86 DGB /TH/Day. This amounts to about 4,700 DGB per day, which is still far-removed from the 7,400 DGB estimated from whattomine.com. So, if you take the 375 I made over 3 hours on the pool @ 52 TH, that's around 3000 DGB a day, and there is no way I would mine at that profitability.   I would like to mine this coin, but cannot afford to do so when other coins are more profitable.

Is there anything that you would suggest to increase rewards per day? Or does this all sound normal?

Thanks