I changed my login location and now cannot connect to dgb myr-groestl webpage. I get the error
This site can’t provide a secure connection
dgb-groestl.theblocksfactory.com sent an invalid response.
ERR_SSL_PROTOCOL_ERROR
Whats going on. Its the only webpage Im having a problem with
Topic: The Blocks Factory - Multicoin pool - page 25. (Read 198209 times)
hey can anyone help just setup my miner to mine and its not connecting to the server but I see other people are hashing, I think, can anyone help.
asic s9 antminer
thanks
asic s9 antminer
thanks
Stratum server dead? 
theblocksfactory.com
502 Bad Gateway
502 Bad Gateway
I'm having an issue with the DGB-Skein difficulty. It's show up, and so even though I specify username.workername_diff0.256 it's been ignoring my specifying the difficulty. I get some of them going up to Diff 5, which is ridiculous and I'm getting up to 35% rejected as a result.
I have GTX1060's so I need to set the difficulty lower so that I don't end up with stupidly high invalids like this. Previously it's worked fine and I've sat around 2-3%. What's going wrong with the server to make this now ignored / overridden?
I have GTX1060's so I need to set the difficulty lower so that I don't end up with stupidly high invalids like this. Previously it's worked fine and I've sat around 2-3%. What's going wrong with the server to make this now ignored / overridden?
Try 0.8 for your difficulty
, let me know how that goesChanging to the MiningField servers and immediately I'm at 98.5% accepted, without changing anything on my side except the URL
hi every one
before all sorry for my english , i m french.......
i m new on this pool until yesterday...i try to be familiar with all this stuff.... i remark most of time my actual works is 3 to 5 time higher than expected work
and result be on red with 20 to 35mn to find .... if good understand that come from the difficulty level
if yes how i can set up this parameter , i already try to do workername.username_diff like they said but that put my miners in inactive status
please help me what i miss
thanks to all for your time
before all sorry for my english , i m french.......
i m new on this pool until yesterday...i try to be familiar with all this stuff.... i remark most of time my actual works is 3 to 5 time higher than expected work
and result be on red with 20 to 35mn to find .... if good understand that come from the difficulty level
if yes how i can set up this parameter , i already try to do workername.username_diff like they said but that put my miners in inactive status
please help me what i miss
thanks to all for your time
getting tired of this pool crashing..
You can withdraw with the following after inputting your address in the account section
Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
OK. Thank you very much.Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
Questions - can I withdraw DGB to wallet Electrum (btc)? Or via Automatic Payout Threshold: - I need to open a special purse for DGB?
Cash out / Manual Payout: - how (where) can I enter data for - Payout to:
I apologize for such simple questions - I am just one day theblocksfactory.com.
You cannot withdraw DGB to wallet Electrum. What you will need is a DGB compatible Wallet that provides you with the appropriate receiving address. at the moment I would recommend downloading Digibyte Core - Wallet which you can find by clicking here
If you would like a full run down/tutorial I will be happy enough to guide you through every step via PM so we are not spamming the thread.
You can withdraw with the following after inputting your address in the account section
Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
OK. Thank you very much.Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
Questions - can I withdraw DGB to wallet Electrum (btc)? Or via Automatic Payout Threshold: - I need to open a special purse for DGB?
Cash out / Manual Payout: - how (where) can I enter data for - Payout to:
I apologize for such simple questions - I am just one day theblocksfactory.com.
You can withdraw with the following after inputting your address in the account section
Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
OK. Thank you very much. Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
Where I can read the description how to withdraw your earnings from scrypt.theblocksfactory.com?
You can withdraw with the following after inputting your address in the account section
Automatic Payout Threshold: Minimum 25 DGB Note: 0.5 DGB transaction fee apply's for this method
or
Cash out / Manual Payout: Minimum 10 DGB Note: 1 DGB transaction fee apply's for this method
Where I can read the description how to withdraw your earnings from scrypt.theblocksfactory.com?
I will keep this in mind
hello comunity
I have an antminer s9 and l3.
can someone tell me the best frequency from the miner?
and what is the best difficulty?
at the l3 I have: name.6_diff0.016
is this good?
Thanks for your help
I have an antminer s9 and l3.
can someone tell me the best frequency from the miner?
and what is the best difficulty?
at the l3 I have: name.6_diff0.016
is this good?
Thanks for your help
Hi Waffi,
For the best difficulty you want to try get a share rate or 20-30 shares a minute in my opinion as that works well with mine. In regards to the L3, try 0.045 for the difficulty and let me know how that goes.
if you have any other problems or questions dont hesitate to send me a pm
I'm getting 11% rejects on my 5 avalon A6 miners, while getting 1.5% on my Antminer S7.
Tried changing number of devices between 5 (number of Avalons) and 1 (all connected to 1 controller), still very high.
Tried changing the difficulty. Right now at _diff32, still at 10%.
Antminer is at 1 worker, the Avalons are on another.
Any ideas?
EDIT: on stats page i saw recommended difficulty at 8k. Set it at 8192 and now its lower than 5%. More tests needed
Tried changing number of devices between 5 (number of Avalons) and 1 (all connected to 1 controller), still very high.
Tried changing the difficulty. Right now at _diff32, still at 10%.
Antminer is at 1 worker, the Avalons are on another.
Any ideas?
EDIT: on stats page i saw recommended difficulty at 8k. Set it at 8192 and now its lower than 5%. More tests needed
hello comunity
I have an antminer s9 and l3.
can someone tell me the best frequency from the miner?
and what is the best difficulty?
at the l3 I have: name.6_diff0.016
is this good?
Thanks for your help
I have an antminer s9 and l3.
can someone tell me the best frequency from the miner?
and what is the best difficulty?
at the l3 I have: name.6_diff0.016
is this good?
Thanks for your help
I'm having an issue with the DGB-Skein difficulty. It's show up, and so even though I specify username.workername_diff0.256 it's been ignoring my specifying the difficulty. I get some of them going up to Diff 5, which is ridiculous and I'm getting up to 35% rejected as a result.
I have GTX1060's so I need to set the difficulty lower so that I don't end up with stupidly high invalids like this. Previously it's worked fine and I've sat around 2-3%. What's going wrong with the server to make this now ignored / overridden?
I have GTX1060's so I need to set the difficulty lower so that I don't end up with stupidly high invalids like this. Previously it's worked fine and I've sat around 2-3%. What's going wrong with the server to make this now ignored / overridden?
Try 0.8 for your difficulty
, let me know how that goes
I'm having an issue with the DGB-Skein difficulty. It's show up, and so even though I specify username.workername_diff0.256 it's been ignoring my specifying the difficulty. I get some of them going up to Diff 5, which is ridiculous and I'm getting up to 35% rejected as a result.
I have GTX1060's so I need to set the difficulty lower so that I don't end up with stupidly high invalids like this. Previously it's worked fine and I've sat around 2-3%. What's going wrong with the server to make this now ignored / overridden?
I have GTX1060's so I need to set the difficulty lower so that I don't end up with stupidly high invalids like this. Previously it's worked fine and I've sat around 2-3%. What's going wrong with the server to make this now ignored / overridden?
Hello! what better to specify the difficulty for DGB SHA256 using S7 and S9?
Ктo чтo пpoбoвaл? нигдe нe мoгy нaйти oтвeт...
Ктo чтo пpoбoвaл? нигдe нe мoгy нaйти oтвeт...
@egumnov be more specific with your question, and I'll help
@egumnov быть бoлee кoнкpeтным c вaшим вoпpocoм, и я пoмoгy
Jump to: