The Blocks Factory - Multicoin pool - page 35.

shitobu

newbie

Activity: 9

Merit: 0

There is something wrong with my account.
I've been mining for over 30mins but my hash rate on the website doesn't change.

Code:

ccminer --algo=skein -o stratum+tcp://s1.theblocksfactory.com:9001 -u myuserername.myworker -p myworkerpassword

This is the code I've been using. Is the address wrong?

Also, in the ccminer it shows that my hash rates are normally, like if I was true mining.
But it doesn't update on website...

WAIT, LOL.
The hash rates change depending on what algorithm you have selected on the website.
It shows my rates now.

Gans888

full member

Activity: 196

Merit: 100

Hi! I'm new miner. Sorry me for my english.I have 1 question. Hours ago I run test miner in your pool. I see hashrate in your dashboard. I see increasing balance. But now moment I see only hashrate and balance = 0. I not activated autopay and I not indicated the address for pays. What is this? My userID 26750.

dadach

sr. member

Activity: 365

Merit: 250

what is happening with SHA pool?

forpublic

newbie

Activity: 2

Merit: 0

Quote from: forpublic on June 08, 2017, 06:04:17 PM

Withdrawn my account just now, the transactions page shows it, but the link goes to an unknown transaction.
The address is right, but the digiexplorer says "Transaction not found". And my wallet doesn't show it.
WTF? Anybody knows how to deal with it?

Never mind, I got it. "Fast" DGB transactions can take half an hour to complete.

forpublic

newbie

Activity: 2

Merit: 0

Withdrawn my account just now, the transactions page shows it, but the link goes to an unknown transaction.
The address is right, but the digiexplorer says "Transaction not found". And my wallet doesn't show it.
WTF? Anybody knows how to deal with it?

Azateq

newbie

Activity: 14

Merit: 0

Hm? You just put in 40 MH's if your MHs is 60 with myr gr. I guess?

I think ccminer uses myr gr algo already, so my 1070 shows 70mhs.

Tuner77

member

Activity: 112

Merit: 10

Quote from: Azateq on June 07, 2017, 07:09:44 PM

Quote from: Tuner77 on June 07, 2017, 12:19:42 PM

Anyone know why What To Mine's main GPU comparison page shows DGB-Groestl(DGB) with "Myriad-Groestl" and a black circle with an "i" in it? (can't click on it). It's listed as the top GPU coin/algo for CUDA, but seems to report a value higher than what I get. If I mine with Groestl, I get about 110Mh/s per 1080Ti, and I get the exact same speed with myriad-groestl, and the same payout, both of which are lower than WTM's comparison page reports.

When you click on "DGB-Groestl(DGB)" and enter your values on that page, it shows a lower payout than on the main comparison page, and it's more accurate with actual pool earnings, but doesn't mention myriad-groestl, only groestl. There is no page to specifically for Myriad-Groestl-DGB (that I can find).

I'm not even mining DGB with either algo (using skein). I just want to make sure there isn't a myriad-groestl miner out there that gets much higher values than skein.

Mainpage ist Groestl ~ the ! says groestl * 1.5 = myr gr

Weird. It didn't show anything when I hovered over it. Anyhow, none of the popular miners seem to give 1.5 groestl with myr-gr, or at least not ccminer.

Azateq

newbie

Activity: 14

Merit: 0

Quote from: Tuner77 on June 07, 2017, 12:19:42 PM

Anyone know why What To Mine's main GPU comparison page shows DGB-Groestl(DGB) with "Myriad-Groestl" and a black circle with an "i" in it? (can't click on it). It's listed as the top GPU coin/algo for CUDA, but seems to report a value higher than what I get. If I mine with Groestl, I get about 110Mh/s per 1080Ti, and I get the exact same speed with myriad-groestl, and the same payout, both of which are lower than WTM's comparison page reports.

When you click on "DGB-Groestl(DGB)" and enter your values on that page, it shows a lower payout than on the main comparison page, and it's more accurate with actual pool earnings, but doesn't mention myriad-groestl, only groestl. There is no page to specifically for Myriad-Groestl-DGB (that I can find).

I'm not even mining DGB with either algo (using skein). I just want to make sure there isn't a myriad-groestl miner out there that gets much higher values than skein.

Mainpage ist Groestl ~ the ! says groestl * 1.5 = myr gr

Mister_E

newbie

Activity: 5

Merit: 0

Okay, had it working, tried some other miner, did a full windows reinstall... now cant get it to work. I'm just trying the basic commandline from the site, with my username and miner number.

What i get is the startscreen with the jansson 2.7 line. then the screen dissapears. Am I missing something? It worked like this before, also on a clean windows install....

sgminer.exe -k myriadcoin-groestl -o stratum.dgb-groestl.theblocksfactory.com:9003 -u Mister_E.M1 -p xXx -I 20

Tuner77

member

Activity: 112

Merit: 10

Anyone know why What To Mine's main GPU comparison page shows DGB-Groestl(DGB) with "Myriad-Groestl" and a black circle with an "i" in it? (can't click on it). It's listed as the top GPU coin/algo for CUDA, but seems to report a value higher than what I get. If I mine with Groestl, I get about 110Mh/s per 1080Ti, and I get the exact same speed with myriad-groestl, and the same payout, both of which are lower than WTM's comparison page reports.

When you click on "DGB-Groestl(DGB)" and enter your values on that page, it shows a lower payout than on the main comparison page, and it's more accurate with actual pool earnings, but doesn't mention myriad-groestl, only groestl. There is no page to specifically for Myriad-Groestl-DGB (that I can find).

I'm not even mining DGB with either algo (using skein). I just want to make sure there isn't a myriad-groestl miner out there that gets much higher values than skein.

Narkano

newbie

Activity: 2

Merit: 0

I did not, but tried Groestl and got double the rate so stayed on that a while, for a much nicer return. Like I said, my first time ever. I will likely start caring about ASICs once I get the hang of it.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: Narkano on June 06, 2017, 11:08:58 AM

Trying my first ever go at ccminer using Qubit to mine DGB. Registered, set up a worker.
Am I doing this right? My GPU is at 100% but otherwise I'm not sure.

ccminer.exe -q -a qubit -o stratum+tcp://s1.theblocksfactory.com:9000 -u Me.user -p pass

"GPU#0: Intensity set to 19, 524288 cuda threads"

Update - Never mind, I'm running on 2 comps now and successfully mined a couple coins, my test GPU was just significantly slower than the 1070.

You do realise that Qubit is mineable by the Baikal ASIC?

Dunno if you're going to be profitable trying to compete against those with a GPU.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: atsuyim on June 05, 2017, 02:35:14 PM

what am i doing wrong here?

My workers are from here theblocksfactory.com and they have very less info on help section so i need help from you guys

i also did this and i get the error

Code:

./cgminer --scrypt -o stratum+tcp://stratum.dgb.theblocksfactory.com:9002 -u darkroom.1 -p j

stratum+tcp://s1.theblocksfactory.com:9004 for DGB-scrypt.

Nokia555

sr. member

Activity: 392

Merit: 266

EthMonitoring.com

Can somebody help with the difficutly setting? Getting too many rejects.

Valid hahsrate Invalid hahsrate
1.03 GH/s 234.56 MH/s(18.53%)

I have 1x1080TI, 1070, 1060 3gb, 3 devices set from pool management. vardiff enabled.

Narkano

newbie

Activity: 2

Merit: 0

Trying my first ever go at ccminer using Qubit to mine DGB. Registered, set up a worker.
Am I doing this right? My GPU is at 100% but otherwise I'm not sure.

ccminer.exe -q -a qubit -o stratum+tcp://s1.theblocksfactory.com:9000 -u Me.user -p pass

"GPU#0: Intensity set to 19, 524288 cuda threads"

Update - Never mind, I'm running on 2 comps now and successfully mined a couple coins, my test GPU was just significantly slower than the 1070.

jake217

newbie

Activity: 1

Merit: 0

I am using a Antminer S5 1.15 th and i cant get the difficulty to adjust any less than 2048 on sha256 any idea how?

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Quote from: The-Zah on June 06, 2017, 06:49:14 AM

Quote from: ioglnx on June 06, 2017, 06:37:31 AM

Well the variance is so heavy that it is hard to tell even with my 12.000MH I have problems getting over 2000DGB.
The past days I made 4500-6000DGB per day and more.

Atm the pool again stuck.

I see, do you know if increasing difficulty would help?

Also are you using 18x GTX1080Ti to achieve those figures? Shocked

12 Cards running for DGB each is doing around 1GH of SKEIN.

funnyboy027

newbie

Activity: 32

Merit: 0

hi, what is the best diff number for my rig 6x 1080ti with 5.8GH/s

The-Zah

newbie

Activity: 4

Merit: 0

Quote from: ioglnx on June 06, 2017, 06:37:31 AM

Well the variance is so heavy that it is hard to tell even with my 12.000MH I have problems getting over 2000DGB.
The past days I made 4500-6000DGB per day and more.

Atm the pool again stuck.

I see, do you know if increasing difficulty would help?

Also are you using 18x GTX1080Ti to achieve those figures? Shocked

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Well the variance is so heavy that it is hard to tell even with my 12.000MH I have problems getting over 2000DGB.
The past days I made 4500-6000DGB per day and more.

Atm the pool again stuck.

Topic: The Blocks Factory - Multicoin pool - page 35. (Read 198285 times)