The Blocks Factory - Multicoin pool - page 36.

The-Zah

newbie

Activity: 4

Merit: 0

Quote from: ioglnx on June 06, 2017, 06:20:11 AM

Quote from: The-Zah on June 06, 2017, 06:17:22 AM

Quote from: ioglnx on June 06, 2017, 06:10:39 AM

Your DGB Skein pool has a serious issue:

4619307 Actual Round 881.22934426 33881.351498466 58 min 56 sec 33881.351 470675.072 (1389.19%) 5862.5(1.25%)

Would this explain why even though my hash rate is 360 - 400 MH/s - over a 24 hour period I've only received a relatively low amount of DGB (80ish)?

No not at all - but there have been some blocks that exceeded the 500% very often. The point is the diff is increasing a lot since everyone is mining DGB.

I realise it varies significantly, however given a hash rate of 360 - 400 MH/s combined with the increase that's happening with difficulty - what should I be looking at receiving in a 24 hr period?

As from having read around, people with the same specs as recent as yesterday were averaging 300-500 coins - so despite the increase in difficulty I'm assuming there's some kind of bottleneck somewhere whether on my end or the TPS side?

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Quote from: The-Zah on June 06, 2017, 06:17:22 AM

Quote from: ioglnx on June 06, 2017, 06:10:39 AM

Your DGB Skein pool has a serious issue:

4619307 Actual Round 881.22934426 33881.351498466 58 min 56 sec 33881.351 470675.072 (1389.19%) 5862.5(1.25%)

Would this explain why even though my hash rate is 360 - 400 MH/s - over a 24 hour period I've only received a relatively low amount of DGB (80ish)?

No not at all - but there have been some blocks that exceeded the 500% very often. The point is the diff is increasing a lot since everyone is mining DGB.

The-Zah

newbie

Activity: 4

Merit: 0

Quote from: ioglnx on June 06, 2017, 06:10:39 AM

Your DGB Skein pool has a serious issue:

4619307 Actual Round 881.22934426 33881.351498466 58 min 56 sec 33881.351 470675.072 (1389.19%) 5862.5(1.25%)

Would this explain why even though my hash rate is 360 - 400 MH/s - over a 24 hour period I've only received a relatively low amount of DGB (80ish)?

ioglnx

sr. member

Activity: 574

Merit: 250

Fighting mob law and inquisition in this forum

Your DGB Skein pool has a serious issue:

4619307 Actual Round 881.22934426 33881.351498466 58 min 56 sec 33881.351 470675.072 (1389.19%) 5862.5(1.25%)

The-Zah

newbie

Activity: 4

Merit: 0

I'm using an overclocked GTX 1070 with tpruvot ccminer, that's averaging 360 MH/s - after 16 hours of mining I've only got 64 DGB. According to this https://www.reddit.com/r/Digibyte/comments/6dexuy/mining_digibyte_at_home_for_fun_which_algorithm/ Reddit thread people with similar specs are averaging 350 - 500 DGB per 24 hour period.

I'm using Skein with TPS pool and am trying to figure out why I'm getting significantly less than what others are averaging?

From reading around, one answer may be my difficulty is being automatically set too high. However, when I've tried to set a fixed difficulty using the below instructions I get a stratum authentication failure:
"Setting difficulty : connect to the stratum server with XYZXYZ.workername_diffxxx (xxx is the difficulty).[NO VARDIFF]"

Anyone got any thoughts?

For reference this is my conf file that works:
{
"algo" : "skein",

"url" : "stratum+tcp://stratum.dgb.theblocksfactory.com:9002",
"user" : "XYZ.worker",
"pass" : "XYZ"
}

And this is how I've been trying to set the difficulty, which fails authentication:

{
"algo" : "skein",

"url" : "stratum+tcp://stratum.dgb.theblocksfactory.com:9002",
"user" : "XYZ.worker_diff0.128.[NO VARDIFF]",
"pass" : "XYZ"
}

or

{
"algo" : "skein",

"url" : "stratum+tcp://stratum.dgb.theblocksfactory.com:9002",
"user" : "XYZ.worker_diff0.128",
"pass" : "XYZ"
}

Gedus323

newbie

Activity: 2

Merit: 0

Nobody an idea how to mine DGB with an AMD card?
I am using a RX480 with the latest drivers.

Which miner is the best for DGB and AMD Polaris chips?
I just get the error "no usable gpu detected"

atsuyim

newbie

Activity: 2

Merit: 0

what am i doing wrong here?

My workers are from here theblocksfactory.com and they have very less info on help section so i need help from you guys

Code:

./cgminer --scrypt -o stratum+tcp://192.241.208.11:3333 -u dgbstartmiingingrsa.drakroom -p j

Code:

[2017-06-06 01:02:02] Started cgminer 4.3.5-scrypt.2
[2017-06-06 01:02:03] No devices detected!
[2017-06-06 01:02:03] Waiting for USB hotplug devices or press q to quit
[2017-06-06 01:02:03] Probing for an alive pool
[2017-06-06 01:03:03] No servers were found that could be used to get work from.
[2017-06-06 01:03:03] Please check the details from the list below of the servers you have input
[2017-06-06 01:03:03] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2017-06-06 01:03:03] Pool: 0 URL: stratum+tcp://192.241.208.11:3333 User: dgbstartmiingingrsa.drakroom Password: j
[2017-06-06 01:03:03] No servers could be used! Exiting.

i also did this and i get the error

Code:

./cgminer --scrypt -o stratum+tcp://stratum.dgb.theblocksfactory.com:9002 -u darkroom.1 -p j

Code:

[2017-06-06 01:07:28] Started cgminer 4.3.5-scrypt.2
[2017-06-06 01:07:28] No devices detected!
[2017-06-06 01:07:28] Waiting for USB hotplug devices or press q to quit
[2017-06-06 01:07:28] Probing for an alive pool
[2017-06-06 01:07:30] Pool 0 difficulty changed to 0.5
[2017-06-06 01:07:42] Pool 0 difficulty changed to 0.5
[2017-06-06 01:07:47] Pool 0 difficulty changed to 0.5
[2017-06-06 01:07:53] Pool 0 difficulty changed to 0.5
[2017-06-06 01:07:59] Pool 0 difficulty changed to 0.5
[2017-06-06 01:08:05] Pool 0 difficulty changed to 0.5
[2017-06-06 01:08:10] Pool 0 difficulty changed to 0.5
[2017-06-06 01:08:16] Pool 0 difficulty changed to 0.5
[2017-06-06 01:08:22] Pool 0 difficulty changed to 0.5
[2017-06-06 01:08:27] Pool 0 difficulty changed to 0.5
[2017-06-06 01:08:28] No servers were found that could be used to get work from.
[2017-06-06 01:08:28] Please check the details from the list below of the servers you have input
[2017-06-06 01:08:28] Most likely you have input the wrong URL, forgotten to add a port, or have not set up workers
[2017-06-06 01:08:28] Pool: 0 URL: stratum+tcp://stratum.dgb.theblocksfactory.com:9002 User: darkroom.1 Password: j
[2017-06-06 01:08:28] No servers could be used! Exiting.

cluit

legendary

Activity: 1176

Merit: 1016

As for this pool, if this is the one that my sister was talking about, it has been good for her so far. She is using a solar power 10 PC grid, so she makes money, as opposed to making a small profit and then handing it back to the electric company.

QuintLeo

legendary

Activity: 1498

Merit: 1030

Quote from: artorres on June 05, 2017, 01:09:03 AM

which one is better ccminer or sgminer for skein / groestl??

Alex78 for skein (I think that's a ccminer branch).
Not sure on groetsl, tried a few varients but they all seemed to work the same.

ANY SHA256 miner should work on a DGB-SHA256 pool that can handle the S9.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: Venom1912 on June 04, 2017, 09:33:37 PM

My mistake adding the wrong wallet address ( DOGE instead of DGB ). What's happen to my coin ?Can I have back what I lost Sad

(. Transaction 8a4af28e2eb0ccc2e4ee10316173714001d9242c7be567f50b6e88c38ca108b7.

Have you tried import the DOGE private key in your DGB wallet ?

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: 5h4do3 on June 05, 2017, 02:35:40 AM

Sup Guys need help understanding how you calculated the reward here

4612309 Confirmed! 881.229 mrken 11886 45 sec 778960896 47820800 (6.14%) 491520(1.03%) 4.5817???

1% of 881.229 is no where near 4.58

thanks

http://www.etcwiki.org/wiki/Bitcoin:_PPLNS_vs_PPS

Summary : reward is calculated based on a range of blocks, so when you start mining the reward is always lower for the first blocks. It goes up after.

inaritu

newbie

Activity: 2

Merit: 0

Hi,

It is possible to mine DGB with Avalon6 (SHA256) ? As I can see, some uses antminer S7/S9, but what about Avalon6 ? Did anyone test / use it ?

Thanks my friends

5h4do3

newbie

Activity: 45

Merit: 0

Sup Guys need help understanding how you calculated the reward here

4612309 Confirmed! 881.229 mrken 11886 45 sec 778960896 47820800 (6.14%) 491520(1.03%) 4.5817???

1% of 881.229 is no where near 4.58

thanks

biggan

newbie

Activity: 22

Merit: 0

Quote from: Venom1912 on June 04, 2017, 09:33:37 PM

My mistake adding the wrong wallet address ( DOGE instead of DGB ). What's happen to my coin ?Can I have back what I lost Sad

(. Transaction 8a4af28e2eb0ccc2e4ee10316173714001d9242c7be567f50b6e88c38ca108b7.

not possible, I hope it wasn't much bro Cry

artorres

newbie

Activity: 5

Merit: 0

which one is better ccminer or sgminer for skein / groestl??

Venom1912

newbie

Activity: 1

Merit: 0

My mistake adding the wrong wallet address ( DOGE instead of DGB ). What's happen to my coin ?Can I have back what I lost Sad

(. Transaction 8a4af28e2eb0ccc2e4ee10316173714001d9242c7be567f50b6e88c38ca108b7.

BTChamp

newbie

Activity: 4

Merit: 0

My withdraw not got credited to my wallet and when i try to click on hash it saying Transaction not found please check it sir...

d422b398d692af8159d1a8dc449dc31c1c3f6de7c424482ce6ce580f4b403053 (D6cRAmYWtoXis7PCmnj6nXNZkGj8vtxA4M)

dawgyg

newbie

Activity: 12

Merit: 0

Quote from: Gil80 on June 03, 2017, 06:47:00 PM

what's wrong?

Code:

[09:45:42] Stratum connection to stratum.dgb-groestl.theblocksfactory.com interrupted
[09:45:42] stratum.dgb-groestl.theblocksfactory.com not responding!

getting stuck on:

Code:

[09:46:23] Started sgminer 5.6.1-nicehash-51
[09:46:23] * using Jansson 2.7
[09:46:23] Probing for an alive pool
[09:46:27] stratum.dgb-groestl.theblocksfactory.com difficulty changed to 0.008
[09:46:28] stratum.dgb-groestl.theblocksfactory.com difficulty changed to 8
[09:46:28] Startup GPU initialization... Using settings from pool stratum.dgb-groestl.theblocksfactory.com.
[09:46:28] Startup Pool No = 0
[09:46:28] Initialising kernel myriadcoin-groestl.cl with nfactor 10, n 1024
[09:46:28] Initialising kernel myriadcoin-groestl.cl with nfactor 10, n 1024

sgminer.exe -k myriadcoin-groestl -o stratum.dgb-groestl.theblocksfactory.com:9003 -u username.worker -p xXx -I 20

you have it wrong:
sgminer.exe -k myriadcoin-groestl -o stratum+tcp://dgb-groestl.theblocksfactory.com:9003 -u username.worker -p xXx -I 20

instead and it should work

Gedus323

newbie

Activity: 2

Merit: 0

Hello!

I was trying to mine DGB with my RX480 with the SGminer. The problem is now the program is not detecting any GPU.
So i just get the "no usable gpu detected" error.

Gil80

newbie

Activity: 21

Merit: 0

what's wrong?

Code:

[09:45:42] Stratum connection to stratum.dgb-groestl.theblocksfactory.com interrupted
[09:45:42] stratum.dgb-groestl.theblocksfactory.com not responding!

getting stuck on:

Code:

[09:46:23] Started sgminer 5.6.1-nicehash-51
[09:46:23] * using Jansson 2.7
[09:46:23] Probing for an alive pool
[09:46:27] stratum.dgb-groestl.theblocksfactory.com difficulty changed to 0.008
[09:46:28] stratum.dgb-groestl.theblocksfactory.com difficulty changed to 8
[09:46:28] Startup GPU initialization... Using settings from pool stratum.dgb-groestl.theblocksfactory.com.
[09:46:28] Startup Pool No = 0
[09:46:28] Initialising kernel myriadcoin-groestl.cl with nfactor 10, n 1024
[09:46:28] Initialising kernel myriadcoin-groestl.cl with nfactor 10, n 1024

sgminer.exe -k myriadcoin-groestl -o stratum.dgb-groestl.theblocksfactory.com:9003 -u username.worker -p xXx -I 20

Topic: The Blocks Factory - Multicoin pool - page 36. (Read 198285 times)