The Blocks Factory - Multicoin pool - page 45.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: maverick528 on June 16, 2016, 06:59:30 PM

I used to mine FTC with some spare CPU time and free electricity on your pool. (CPU miner)

Lately when trying to connect it gives an error, like "host not found".

I saw on your "getting started" page that server name changed, but when I put in the new server name on my old .bat file that was tested and working, I get the same error that the host is not found.

Just tested with this address : stratum+tcp://s1.theblocksfactory.com:3333
it's working.

maverick528

full member

Activity: 148

Merit: 100

I used to mine FTC with some spare CPU time and free electricity on your pool. (CPU miner)

Lately when trying to connect it gives an error, like "host not found".

I saw on your "getting started" page that server name changed, but when I put in the new server name on my old .bat file that was tested and working, I get the same error that the host is not found.

Hulseboh

newbie

Activity: 1

Merit: 0

Quote from: carlo_0000 on May 06, 2016, 07:54:51 PM

hello i m on this team for few days
but i have a problem, i get more than 15% rejected
can i do something about that ?

on my old team i get around 5%, but i stop there because i earn a lot less, not enough miners, get lot less to find blocks, because your team is to big, so i joined the big team too, but have lot rejected Angry

and what does this mean ?
rejected .. share is above target

I have seen this several times on the forum, but if you are using ccminer to mine ftc this may help out - it did for me. I assumed that there was an issue with the vardiff getting set too high on the stratum protocol so I locked my difficulty at 32 by following the instructions: -u username.workername_diff32 -p xx. This dropped my rejected due to "share is above target" from 15% to below 1%. Hopefully this helps, possibly an admin from theblocksfactory can take a look or post this on the getting started page.

kuroneko2015

newbie

Activity: 13

Merit: 0

Quote from: Zosski on June 13, 2016, 03:52:28 AM

Quote from: kuroneko2015 on June 12, 2016, 10:32:30 AM

Hi
The FTC pool s1.theblocksfactory.com:3333 may have some problem.
Connection keeps interrupted every 1~2 minutes.
Please check, thanks!

I got problems with FTC pool too.

It's back to normal today with my last night test.
Time to try go back to pool!

Lasergun

legendary

Activity: 1155

Merit: 1174

https://keybase.io/lasergun

Hi, lucazane! Can you add 42 coin to your pool, please? We really need it to be alive. Thanks.

Zosski

newbie

Activity: 1

Merit: 0

Quote from: kuroneko2015 on June 12, 2016, 10:32:30 AM

Hi
The FTC pool s1.theblocksfactory.com:3333 may have some problem.
Connection keeps interrupted every 1~2 minutes.
Please check, thanks!

I got problems with FTC pool too.

kuroneko2015

newbie

Activity: 13

Merit: 0

Hi
The FTC pool s1.theblocksfactory.com:3333 may have some problem.
Connection keeps interrupted every 1~2 minutes.
Please check, thanks!

LkReeves

newbie

Activity: 2

Merit: 0

Hi, i have my miners setup through BfgMiner, and it keeps changing the network difficulty, and i rarely get any accepted shares. lol is this normal?

Powablocks

newbie

Activity: 27

Merit: 0

Hi i have download sgminer and i have an problem :
I have this error : http://prntscr.com/b9ic5j
and on the pool i see this : http://prntscr.com/b9ichg

Can someone help me pls ?

lothar_hayner

newbie

Activity: 3

Merit: 0

Fatal error: Uncaught BitcoinClientException:

: Connect error: Connection refused (111) thrown in Unknown on line 0

Trying to withdraw my orb, nor can I change my auto-payout- which I'm about to hit...

Lothar_hayner

Please fix?

thanks man,

lucazane

legendary

Activity: 1198

Merit: 1000

Worldcoin Pool address change : https://wdc.theblocksfactory.com/server

carlo_0000

legendary

Activity: 1281

Merit: 1003

hello i m on this team for few days
but i have a problem, i get more than 15% rejected
can i do something about that ?

on my old team i get around 5%, but i stop there because i earn a lot less, not enough miners, get lot less to find blocks, because your team is to big, so i joined the big team too, but have lot rejected Angry

and what does this mean ?
rejected .. share is above target

kwaasteniet

hero member

Activity: 924

Merit: 1000

I am mining now DGB with my laptop windows 64 with a Nvidia Geforce GTX850M GPU with the following results:
1. with the ccminer 1.5.79 and skein algo i collect now about 2000DGB/day
2. with ccminer 1.5.79 and Qubit algo i mine about 1300DGB/day
3. Groestl algo didn't work with ccminer 1.5.79 but with 1.6.6 it mined about 1000DGB/day

In all three cases my laptop uses about 25-30 watt more power then in iddle situation and becomes a little bit warm but not hot.
So i use about 0,6kWh a day extra, that's in France about €0,09.

Conclusion: it is profitable to mine DGB with my equipment if the value of DGB > 20 satoshi (at exchange rate $450)

There is also cgminer for Skein but i cannot find the proper windows version. Gives CGminer more hashes then CCminer?

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: PawelSwat on April 25, 2016, 03:05:51 PM

Quote from: lucazane on April 25, 2016, 02:44:25 PM

Quote from: PawelSwat on April 25, 2016, 02:43:10 PM

Problem with DGB skein autowithdraw
9777924 2016-04-25 16:32:35 Debit_ATP0(D8HFQFZeM9hPe7f35cA37jQ1jyiVZiv35K) -865110.37042765 Help please

yes too much in one time. I am sending it to you manualy

edit : http://digiexplorer.info/tx/c98c8ca182d9262f1cdfe471e4164679cf681a81abb11a3bd39d32788d4acaa4

Sorry, didn't know that there are restrictions. I have received. Thanks.

This is not a restriction, its just the wallet not able to send transactions with too much small tx_in (reward from mined block)

PawelSwat

newbie

Activity: 2

Merit: 0

Quote from: lucazane on April 25, 2016, 02:44:25 PM

Quote from: PawelSwat on April 25, 2016, 02:43:10 PM

Problem with DGB skein autowithdraw
9777924 2016-04-25 16:32:35 Debit_ATP0(D8HFQFZeM9hPe7f35cA37jQ1jyiVZiv35K) -865110.37042765 Help please

yes too much in one time. I am sending it to you manualy

edit : http://digiexplorer.info/tx/c98c8ca182d9262f1cdfe471e4164679cf681a81abb11a3bd39d32788d4acaa4

Sorry, didn't know that there are restrictions. I have received. Thanks.

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: PawelSwat on April 25, 2016, 02:43:10 PM

Problem with DGB skein autowithdraw
9777924 2016-04-25 16:32:35 Debit_ATP0(D8HFQFZeM9hPe7f35cA37jQ1jyiVZiv35K) -865110.37042765 Help please

yes too much in one time. I am sending it to you manualy

edit : http://digiexplorer.info/tx/c98c8ca182d9262f1cdfe471e4164679cf681a81abb11a3bd39d32788d4acaa4

PawelSwat

newbie

Activity: 2

Merit: 0

Problem with DGB skein autowithdraw
9777924 2016-04-25 16:32:35 Debit_ATP0(D8HFQFZeM9hPe7f35cA37jQ1jyiVZiv35K) -865110.37042765 Help please

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: 1night on April 25, 2016, 11:45:21 AM

hello , i have a question, i saw that i found a block today and its already confirmed , but i didnt receive the 80 coins from block find.
its 1 hour ago after confirmation.

1186285 Confirmed! 80.12 daesp 16.6088 2 min 31 sec 1088474 1975444 (181.49%) 2944(0.15%) 0.1784

need help, support pls.

greez

Mined block reward are splitted between all miners proportionally to the amount of share diff submitted

1night

newbie

Activity: 1

Merit: 0

hello , i have a question, i saw that i found a block today and its already confirmed , but i didnt receive the 80 coins from block find.
its 1 hour ago after confirmation.

1186285 Confirmed! 80.12 daesp 16.6088 2 min 31 sec 1088474 1975444 (181.49%) 2944(0.15%) 0.1784

need help, support pls.

greez

lucazane

legendary

Activity: 1198

Merit: 1000

Quote from: paul4now38 on April 08, 2016, 09:30:16 AM

can some one tell me >:(why I can not with draw my coins, this is the error I get

Fatal error: Uncaught BitcoinClientException:

: Connect error: Connection refused (111) thrown in Unknown on line 0

Fixed

Topic: The Blocks Factory - Multicoin pool - page 45. (Read 198291 times)