I was searching for power supplies and found this site: http://www.parallelminer.com/product/2400watt-200v240v-power-supply-kit-for-2-antminer-r4-platinum-94-efficiency/
2400W platinum psu, 16 pcie port breakout board, $109 USD. Thoughts? Any suggestions on pico psu to power to mobo using this psu?
Topic: Third alt coin thread last two were too big. Builds links thoughts etc - page 5. (Read 41866 times)
April 15, 2017, 08:59:37 AM
April 15, 2017, 08:49:25 AM
stop and just buy these
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202275
rx 480 8gb for 205 = fucking cheap
as for 1080 ti
if you are lucky and get a founders ed which are skinny it does 660 h and costs 699
the ones above do 290 h and cost 200
1080 ti makes sense for me because they save power
amd = 2h for 1 watt
nvidia = 3h for 1 watt
I also have buyers for my 1080 ti's lined up for later this year.
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202275
rx 480 8gb for 205 = fucking cheap
as for 1080 ti
if you are lucky and get a founders ed which are skinny it does 660 h and costs 699
the ones above do 290 h and cost 200
1080 ti makes sense for me because they save power
amd = 2h for 1 watt
nvidia = 3h for 1 watt
I also have buyers for my 1080 ti's lined up for later this year.
Wow that is a steal, they have the same price for the 4gb model atm.
I just barely added 3 x 470s and got them going.
But difficulty shot up yesterday so adding another one would help offset my coin reduction for anther week lolz.
April 15, 2017, 08:12:49 AM
stop and just buy these
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202275
rx 480 8gb for 205 = fucking cheap
as for 1080 ti
if you are lucky and get a founders ed which are skinny it does 660 h and costs 699
the ones above do 290 h and cost 200
1080 ti makes sense for me because they save power
amd = 2h for 1 watt
nvidia = 3h for 1 watt
I also have buyers for my 1080 ti's lined up for later this year.
https://www.newegg.com/Product/Product.aspx?Item=N82E16814202275
rx 480 8gb for 205 = fucking cheap
as for 1080 ti
if you are lucky and get a founders ed which are skinny it does 660 h and costs 699
the ones above do 290 h and cost 200
1080 ti makes sense for me because they save power
amd = 2h for 1 watt
nvidia = 3h for 1 watt
I also have buyers for my 1080 ti's lined up for later this year.
April 15, 2017, 06:41:47 AM
Almost bought Msi 1080 ti card yesterday (for zec).
Two developments stopped me:
1. msi 1080 ti card is actually 2.5in in width. I measured it's size on the H97 mobo and it is probably would interfere with the front slot when in 16XPCIE slot according to my guesstimate. Maybe I could have can hanged it on a riser....oh, well, it is sold out at newegg now.
2. AMD RX 500 series will be released on Tue. Assuming even $250 price, they should mine zec at 330-350 h/s ea without any bios tweaks PLUS maybe 28-30 in eth. So, two cards will cost only $500 but perform as a $750 1080ti card (at least in zec).
Two developments stopped me:
1. msi 1080 ti card is actually 2.5in in width. I measured it's size on the H97 mobo and it is probably would interfere with the front slot when in 16XPCIE slot according to my guesstimate. Maybe I could have can hanged it on a riser....oh, well, it is sold out at newegg now.
2. AMD RX 500 series will be released on Tue. Assuming even $250 price, they should mine zec at 330-350 h/s ea without any bios tweaks PLUS maybe 28-30 in eth. So, two cards will cost only $500 but perform as a $750 1080ti card (at least in zec).
FREAKING wise decision ...
but my birdies told me, 5xx series will be LIMITED in qty
April 15, 2017, 02:32:48 AM
I was testing failover pool formats on smOS for sgminer-gm ETH and Claymore v9 -- I might have pointed a few GHs to Philip's BTC address for a few minutes.... LOL. Just FYI Phil so no surprises 
April 15, 2017, 12:15:31 AM
Almost bought Msi 1080 ti card yesterday (for zec).
Two developments stopped me:
1. msi 1080 ti card is actually 2.5in in width. I measured it's size on the H97 mobo and it is probably would interfere with the front slot when in 16XPCIE slot according to my guesstimate. Maybe I could have can hanged it on a riser....oh, well, it is sold out at newegg now.
2. AMD RX 500 series will be released on Tue. Assuming even $250 price, they should mine zec at 330-350 h/s ea without any bios tweaks PLUS maybe 28-30 in eth. So, two cards will cost only $500 but perform as a $750 1080ti card (at least in zec).
Two developments stopped me:
1. msi 1080 ti card is actually 2.5in in width. I measured it's size on the H97 mobo and it is probably would interfere with the front slot when in 16XPCIE slot according to my guesstimate. Maybe I could have can hanged it on a riser....oh, well, it is sold out at newegg now.
2. AMD RX 500 series will be released on Tue. Assuming even $250 price, they should mine zec at 330-350 h/s ea without any bios tweaks PLUS maybe 28-30 in eth. So, two cards will cost only $500 but perform as a $750 1080ti card (at least in zec).
April 14, 2017, 09:50:42 PM
optiminer-zec v1.7 (zcash ) on
-s equihash.usa.nicehash.com:3357 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.panda1 -p x
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpsw x -esm 0 -dbg -1 -wd 1 -r 1 -ethi 16 -etha 0 -estale 1 -mode 1
now mining here:
-epool stratum+tcp://daggerhashimoto.usa.nicehash.com:33353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -etha 0 -ethi 15 epsw x -allpools 1 -mport -3333 -dbg -1 -mode 1 -wd 1 -r 1
i would take out the -allcoins setting
it loads two dag files on the gpu both different sizes
unless you mine expanse
done.
I am playing with eth settings I just am looking to see some setting that will help manage heat issues as the weather warms up.
I am seeing how low core numbers affect power use.
clocks like
800 core
2222 ram
0 power setting on smOS drop hash and power a lot
just need to see if :
hash drops less then power drops = good
hash drops exact same as power = a push or neutral
hash drops more then power = bad
im in the same boat as you are right now
its summer time in florida its 80f already so its just going to get hotter and i already have 19 cards
so till winter time its saving all profit till then
April 14, 2017, 05:43:32 PM
optiminer-zec v1.7 (zcash ) on
-s equihash.usa.nicehash.com:3357 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.panda1 -p x
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpsw x -esm 0 -dbg -1 -wd 1 -r 1 -ethi 16 -etha 0 -estale 1 -mode 1
now mining here:
-epool stratum+tcp://daggerhashimoto.usa.nicehash.com:33353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -etha 0 -ethi 15 epsw x -allpools 1 -mport -3333 -dbg -1 -mode 1 -wd 1 -r 1
i would take out the -allcoins setting
it loads two dag files on the gpu both different sizes
unless you mine expanse
done.
I am playing with eth settings I just am looking to see some setting that will help manage heat issues as the weather warms up.
I am seeing how low core numbers affect power use.
clocks like
800 core
2222 ram
0 power setting on smOS drop hash and power a lot
just need to see if :
hash drops less then power drops = good
hash drops exact same as power = a push or neutral
hash drops more then power = bad
April 14, 2017, 04:51:42 PM
optiminer-zec v1.7 (zcash ) on
-s equihash.usa.nicehash.com:3357 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.panda1 -p x
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpsw x -esm 0 -dbg -1 -wd 1 -r 1 -ethi 16 -etha 0 -estale 1 -mode 1
now mining here:
-epool stratum+tcp://daggerhashimoto.usa.nicehash.com:33353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -etha 0 -ethi 15 epsw x -allpools 1 -allcoins 1 -mport -3333 -dbg -1 -mode 1 -wd 1 -r 1
i would take out the -allcoins setting
it loads two dag files on the gpu both different sizes
unless you mine expanse
April 14, 2017, 02:49:25 PM
optiminer-zec v1.7 (zcash ) on
-s equihash.usa.nicehash.com:3357 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.panda1 -p x
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpsw x -esm 0 -dbg -1 -wd 1 -r 1 -ethi 16 -etha 0 -estale 1 -mode 1
now mining here:
-epool stratum+tcp://daggerhashimoto.usa.nicehash.com:33353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -etha 0 -ethi 15 epsw x -allpools 1 -allcoins 1 -mport -3333 -dbg -1 -mode 1 -wd 1 -r 1
April 14, 2017, 02:19:27 PM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
I have 2 nvidia rigs
rest are amd
What settings are you running the Amd's on equilhash?
I thought about moving them over to it.
1050
2050
power 0
these cards all have stock bios and are clocked not aggressively here are zec numbers.
If you clock it harder with stock bios it can go to 290h
if you really push them on clocks they can get past 300h
my issues are heat since it is warming up.
ZEC on RX cards IMHO will be a waste of hash
This is very much due to architecture -- thats why RXs at best 290-300 VS R9 high end cards like Fury X, Nano etc touches 440-460 sols/s
NVIDIA cards esp the 10xx series seems a perfect match for ZEC mining.
As we all know.... RX runs best for ETH - Claymore and Optiminer can push RX cards to 290-300 sols/s at best, with asm optimization.
I think you will get more BTCs in NH if you put all RX to sell Ethhash and all NVIDIA rig to sell Equihash.
yeah it strictly a heat issue for me.. I prefer to run them on eth but it is a lot more watts.
optiminer-zec v1.7 (zcash ) on
-s equihash.usa.nicehash.com:3357 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.panda1 -p x
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpsw x -esm 0 -dbg -1 -wd 1 -r 1 -ethi 16 -etha 0 -estale 1 -mode 1
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 0 -allpools 1 -dbg -1 -wd 1 -r 1 -ethi 5 -dcri 15 -dcoin decred
-epool stratum+tcp://daggerhashimoto.usa.nicehash.com:3353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -epsw x -allpools 1 -allcoins 1 -mport -3333 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -dpsw x -dbg -1 -ethi 12 -dcri 36 -etha 0 -dcoin decred
I think Claymore on NH is also SSL connection supported. You reduce dev fee by 0.5%. If not mistaken, port 33354. Take note prefix "3"
April 14, 2017, 01:09:24 PM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
I have 2 nvidia rigs
rest are amd
What settings are you running the Amd's on equilhash?
I thought about moving them over to it.
1050
2050
power 0
these cards all have stock bios and are clocked not aggressively here are zec numbers.
If you clock it harder with stock bios it can go to 290h
if you really push them on clocks they can get past 300h
my issues are heat since it is warming up.
ZEC on RX cards IMHO will be a waste of hash
This is very much due to architecture -- thats why RXs at best 290-300 VS R9 high end cards like Fury X, Nano etc touches 440-460 sols/s
NVIDIA cards esp the 10xx series seems a perfect match for ZEC mining.
As we all know.... RX runs best for ETH - Claymore and Optiminer can push RX cards to 290-300 sols/s at best, with asm optimization.
I think you will get more BTCs in NH if you put all RX to sell Ethhash and all NVIDIA rig to sell Equihash.
yeah it strictly a heat issue for me.. I prefer to run them on eth but it is a lot more watts.
optiminer-zec v1.7 (zcash ) on
-s equihash.usa.nicehash.com:3357 -u 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.panda1 -p x
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpsw x -esm 0 -dbg -1 -wd 1 -r 1 -ethi 16 -etha 0 -estale 1 -mode 1
-epool stratum+tcp://us1.ethpool.org:3333 -ewal 0x3ef297e47404a771139472b93621f82c8a832857.Simple2 -esm 0 -epsw x -allpools 1 -mport -3333 -dpool stratum+tcp://decred.usa.nicehash.com:3354 -dwal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 0 -allpools 1 -dbg -1 -wd 1 -r 1 -ethi 5 -dcri 15 -dcoin decred
-epool ssl//daggerhashimoto.usa.nicehash.com:33353 -ewal 1JdC6Xg3ajT3rge3FgPNSYYFpmf53Vbtje.Simple2 -esm 3 -etha 0 -ethi 15 epsw x -allpools 1 -allcoins 1 -mport -3333 -dbg -1 -mode 1 -wd 1 -r 1
April 14, 2017, 12:45:20 PM
Hi!
Please, could you give me some advice about SMos settings sgminer 555-8 nh.
I have 4 rigs 480x5, all of this stuff working on Win7 NH as well.
But I also want to transfer it to SMos. When I start it by default settings, not any OC, it gives me 50% less than Win NH mining
What's your favorite settings for rx480 and NH miner?
Thx a lot!
Please, could you give me some advice about SMos settings sgminer 555-8 nh.
I have 4 rigs 480x5, all of this stuff working on Win7 NH as well.
But I also want to transfer it to SMos. When I start it by default settings, not any OC, it gives me 50% less than Win NH mining
What's your favorite settings for rx480 and NH miner?
Thx a lot!
what are you mining with sgminer-gm v5.5.5-8 at NH?
In my experience with NH mining, the following works best:
ZEC use Optiminer v1.7
ETH use Claymore v9
XMR use sgminer-gm v5.5.5-8-NH
RX cards works best for ETH
R9 cards and NVIDIA 10xx work best for ZEC
Why Musicoin now is so "popular"? (WhattoMine). Is some somebody mine this now?
April 14, 2017, 12:23:05 PM
Hi!
Please, could you give me some advice about SMos settings sgminer 555-8 nh.
I have 4 rigs 480x5, all of this stuff working on Win7 NH as well.
But I also want to transfer it to SMos. When I start it by default settings, not any OC, it gives me 50% less than Win NH mining
What's your favorite settings for rx480 and NH miner?
Thx a lot!
Please, could you give me some advice about SMos settings sgminer 555-8 nh.
I have 4 rigs 480x5, all of this stuff working on Win7 NH as well.
But I also want to transfer it to SMos. When I start it by default settings, not any OC, it gives me 50% less than Win NH mining
What's your favorite settings for rx480 and NH miner?
Thx a lot!
what are you mining with sgminer-gm v5.5.5-8 at NH?
In my experience with NH mining, the following works best:
ZEC use Optiminer v1.7
ETH use Claymore v9
XMR use sgminer-gm v5.5.5-8-NH
RX cards works best for ETH
R9 cards and NVIDIA 10xx work best for ZEC
April 14, 2017, 12:14:28 PM
Hi!
Please, could you give me some advice about SMos settings sgminer 555-8 nh.
I have 4 rigs 480x5, all of this stuff working on Win7 NH as well.
But I also want to transfer it to SMos. When I start it by default settings, not any OC, it gives me 50% less than Win NH mining
What's your favorite settings for rx480 and NH miner?
Thx a lot!
Please, could you give me some advice about SMos settings sgminer 555-8 nh.
I have 4 rigs 480x5, all of this stuff working on Win7 NH as well.
But I also want to transfer it to SMos. When I start it by default settings, not any OC, it gives me 50% less than Win NH mining
What's your favorite settings for rx480 and NH miner?
Thx a lot!
April 14, 2017, 12:00:27 PM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
I have 2 nvidia rigs
rest are amd
What settings are you running the Amd's on equilhash?
I thought about moving them over to it.
1050
2050
power 0
these cards all have stock bios and are clocked not aggressively here are zec numbers.
If you clock it harder with stock bios it can go to 290h
if you really push them on clocks they can get past 300h
my issues are heat since it is warming up.
ZEC on RX cards IMHO will be a waste of hash
This is very much due to architecture -- thats why RXs at best 290-300 VS R9 high end cards like Fury X, Nano etc touches 440-460 sols/s
NVIDIA cards esp the 10xx series seems a perfect match for ZEC mining.
As we all know.... RX runs best for ETH - Claymore and Optiminer can push RX cards to 290-300 sols/s at best, with asm optimization.
I think you will get more BTCs in NH if you put all RX to sell Ethhash and all NVIDIA rig to sell Equihash.
April 14, 2017, 11:28:45 AM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
I have 2 nvidia rigs
rest are amd
What settings are you running the Amd's on equilhash?
I thought about moving them over to it.
1050
2050
power 0
these cards all have stock bios and are clocked not aggressively here are zec numbers.
If you clock it harder with stock bios it can go to 290h
if you really push them on clocks they can get past 300h
my issues are heat since it is warming up.
April 14, 2017, 10:34:28 AM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
I have 2 nvidia rigs
rest are amd
What settings are you running the Amd's on equilhash?
I thought about moving them over to it.
April 14, 2017, 10:17:24 AM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
I have 2 nvidia rigs
rest are amd
April 14, 2017, 07:11:56 AM
I hate y'all sometimes
Now I wanna build a nvidia rig....
Now I wanna build a nvidia rig....
LOL.... man doesn't live on bread alone
Jump to: