Two stage performance tuning for S9 / S9i (include version for immersion cooling

ironson

newbie

Activity: 4

Merit: 2

Quote from: m3hm3t on October 23, 2018, 05:18:20 PM

There is no Dev Fee,just I checked in "Awesome Miner" and I didn't see any extra hidden dev fee pools.. But the firmware is reducing hashrate after some minutes,I think it's happening because of voltage issue. Unfortunately this firmware useless for me..

I'm using a Russian firmware "xilinx-antminer-s9-s9i-1.0.7" for S9 13.5 th and I have got result 16.5 th without any issues with 1600w apw3++ psu. But unfortunately having %7 dev fee,damn this russian guy really made a masterpiece firmware.. if anybody can disable dev fee just pm me.. I can pay for it really..

Yep the Russian firmware is awesome, it seems to work just out of box really, I wonder how long it took them to test it, but how do you know it is 7％? How to find out about this I am curious? If we know the hidden pool it uses, perhaps we can block it by firewall?

nohrt1

newbie

Activity: 5

Merit: 0

Quote from: developer00 on October 30, 2018, 04:43:31 PM

asic boost reduces power consumption, similar or better results can be achieved simply by reducing the voltage on the boards in manual or automatic mode. Besides, not all pools support the asic boost function.

Thanks for the response.

You are right, but if you could combine the power saving from ASIC boost and the settings within this firmware would save even more energy.

The latest version from bitmain solved the issues with the pools, specifically slushpool.

developer00

newbie

Activity: 32

Merit: 0

Quote from: rahuldel on October 28, 2018, 01:12:44 AM

IS there a version 8 with autofan ?

Fix Fan

Quote from: nohrt1 on October 29, 2018, 05:36:08 AM

Are you planning on implementing ASIC boost into this firmware? I was using this firmware before but i switched back to Bitmains version with ASIC boost. I would love to switch back if ASIC boost was put into this firmware.

Thanks!

asic boost reduces power consumption, similar or better results can be achieved simply by reducing the voltage on the boards in manual or automatic mode. Besides, not all pools support the asic boost function.

nohrt1

newbie

Activity: 5

Merit: 0

Are you planning on implementing ASIC boost into this firmware? I was using this firmware before but i switched back to Bitmains version with ASIC boost. I would love to switch back if ASIC boost was put into this firmware.

Thanks!

rahuldel

newbie

Activity: 17

Merit: 0

IS there a version 8 with autofan ?

developer00

newbie

Activity: 32

Merit: 0

Quote from: agswin on October 26, 2018, 12:46:34 PM

Or does it fix the sawtooth?

Yep

agswin

newbie

Activity: 7

Merit: 0

Downloading now. Does this version use the new asic boost that bitmain just came out with? Or does it fix the sawtooth?

developer00

newbie

Activity: 32

Merit: 0

Quote from: agswin on October 25, 2018, 11:21:48 PM

Hello developer. I like the firmware except for the “saw tooth” hash rate. It seems the miner stops hashing for about 5 minutes every 60 minutes or so. Can you explain why it does this as it’s resulting in probably a 10% decrease in hash rate negating the benefit. If you could mak it where it does do this and takes advantage of the new asic boost it would be greatly appreciated

Hello!
Have you checked on the latest version - 8a?

agswin

newbie

Activity: 7

Merit: 0

Hello developer. I like the firmware except for the “saw tooth” hash rate. It seems the miner stops hashing for about 5 minutes every 60 minutes or so. Can you explain why it does this as it’s resulting in probably a 10% decrease in hash rate negating the benefit. If you could mak it where it does do this and takes advantage of the new asic boost it would be greatly appreciated

developer00

newbie

Activity: 32

Merit: 0

Quote from: butok on October 25, 2018, 04:36:16 PM

Welcome back developer0 Wink

thanks, I was on vacation )

butok

newbie

Activity: 29

Merit: 4

Welcome back developer0 Wink

developer00

newbie

Activity: 32

Merit: 0

Hello!
Long testing has shown that the tuning of the chips is redundant, and therefore turned off. To avoid interruptions

Please test it

https://drive.google.com/open?id=1g_0-465olHNm2AkVvuVMAorY9vTSlnRJ

m3hm3t

member

Activity: 133

Merit: 15

~ Fortuna Favet Fortibus ~

There is no Dev Fee,just I checked in "Awesome Miner" and I didn't see any extra hidden dev fee pools.. But the firmware is reducing hashrate after some minutes,I think it's happening because of voltage issue. Unfortunately this firmware useless for me..

I'm using a Russian firmware "xilinx-antminer-s9-s9i-1.0.7" for S9 13.5 th and I have got result 16.5 th without any issues with 1600w apw3++ psu. But unfortunately having %7 dev fee,damn this russian guy really made a masterpiece firmware.. if anybody can disable dev fee just pm me.. I can pay for it really..

take876

newbie

Activity: 8

Merit: 3

Quote from: torontobitcoinmanager on October 09, 2018, 12:07:24 PM

confirmed. there is a hidden dev fee. Tested it for fun on 120 s9s. see the saw in the image https://drive.google.com/a/wisdek.com/file/d/1fqepQQMsHyJ6P6d0kCZ0qebfgbDzx4oA/view?usp=drivesdk

I would not mind buying it without dev fee.

hey is there really a hiden dev fee? let me see the screenshot am not seeing it on the link below

torontobitcoinmanager

jr. member

Activity: 66

Merit: 3

confirmed. there is a hidden dev fee. Tested it for fun on 120 s9s. see the saw in the image https://drive.google.com/a/wisdek.com/file/d/1fqepQQMsHyJ6P6d0kCZ0qebfgbDzx4oA/view?usp=drivesdk

I would not mind buying it without dev fee.

take876

newbie

Activity: 8

Merit: 3

ok so i did some research and testing of the obove firmware and below is what i concluded and found out

* The firmware is awesome,however there is hidden dev fees, yes thats when the machine constantly reboot or restart. This person program his firmware to restart every 5 or so minutes to set his mining wallet then after few minutes the system come back to normal.

Other than that good firmware but i would definitely stay away from this firmware.

Another thing is that there is a script that get run on the kernellog thats routing and unknown ip to a 40 something port, never seen that with antminer log before

take876

newbie

Activity: 8

Merit: 3

s9 13.5th am getting stable 16 th currently but am wondering if the temp reading are correct

butok

newbie

Activity: 29

Merit: 4

Quote from: take876 on October 03, 2018, 02:55:26 AM

working really awesome on my s9. hope there is no dev fee or hidden dev fee. this firmware is one of the best i have come across so far, temp is very low on it. again really nice work

One of fellow had problems with S9 13.5T model.
What type/model/speed of S9 have you used?

take876

newbie

Activity: 8

Merit: 3

working really awesome on my s9. hope there is no dev fee or hidden dev fee. this firmware is one of the best i have come across so far, temp is very low on it. again really nice work

hey and how do i change the freq from 687 to higher? do you have any firmware that has freq higher than 687? miner advanced wont let me change freq because its fixed

another thing the miner gui vanishes every 5 or so minutes then come back up. am thinking this is your way of implimenting your dev fee. if not please fix it

cfbtcman

member

Activity: 264

Merit: 16

Hi,

Its possible to put some mining fee for some pool with your software?

Topic: Two stage performance tuning for S9 / S9i (include version for immersion cooling (Read 2730 times)