175MH/s with SLX25???
Only one missing thing are holes that may be useful to mount a heatsink...
Topic: Ultra-Low-Cost DIY FPGA Miner - 175MH/s @ $1/MH - page 14. (Read 125898 times)
I had exact same idea... But I wanted to use LPCExpresso with LPC1769 for ethernet connection
175MH/s with SLX25???
Only one missing thing are holes that may be useful to mount a heatsink...
175MH/s with SLX25???
Only one missing thing are holes that may be useful to mount a heatsink...
Quote
Skillet-reflowed and ultra cheap. No need to pay $500+ for an eval board or $50+ per chip to an assembly house;
fgg484 can be soldered at home in 5 minutes with some flux and a $20 skillet. Grin
It's a xc6slx25 on there now to validate the PCB + asm process; building xc6slx150 soon.
fgg484 can be soldered at home in 5 minutes with some flux and a $20 skillet. Grin
It's a xc6slx25 on there now to validate the PCB + asm process; building xc6slx150 soon.
I am not smart enough to understand what i read but it sounds interesting.
could someone translate for me?
I'm not smart enough to know what I'm looking at, but it looks good
Skillet-reflowed and ultra cheap. No need to pay $500+ for an eval board or $50+ per chip to an assembly house;
high performance FPGAs can be soldered at home in 5 minutes with some flux and a $20 skillet.
It's a xc6slx25 on there now to validate the PCB + asm process; building xc6slx150 soon.
-rph
high performance FPGAs can be soldered at home in 5 minutes with some flux and a $20 skillet.
It's a xc6slx25 on there now to validate the PCB + asm process; building xc6slx150 soon.
-rph
Jump to: