i liked this coin at first but if the dev dont provide at least a roadmap investors wont come
please dev dont waste my electric bill for mining this
Topic: Unitus (UIS): 1st multi-auxPoW - 0.9.3.1 Required Update before Block 25300 - page 13. (Read 102730 times)
January 09, 2015, 10:18:16 AM
January 09, 2015, 10:02:41 AM
Heard some interesting things about this coins and I'm definitely buying some 
Also some nice accumulation going on.
Also some nice accumulation going on.
A good time to buy. Price is about 2K.
yep ..I know, now it was a depressive period for uis.. but I don't understand who is that idiot..who's selling below 2k.. pff..
+1
edit: Selling it below 3-3,5K isn't profitable. Mining all algos became much more expensive last days
January 09, 2015, 09:57:35 AM
Heard some interesting things about this coins and I'm definitely buying some
Also some nice accumulation going on.
Also some nice accumulation going on.
A good time to buy. Price is about 2K.
yep ..I know, now it was a depressive period for uis.. but I don't understand who is that idiot..who's selling below 2k.. pff..
January 09, 2015, 09:24:03 AM
Heard some interesting things about this coins and I'm definitely buying some
Also some nice accumulation going on.
Also some nice accumulation going on.
A good time to buy. Price is about 2K.
January 09, 2015, 07:50:59 AM
Heard some interesting things about this coins and I'm definitely buying some
Also some nice accumulation going on.
Also some nice accumulation going on.
+1
January 09, 2015, 05:23:40 AM
January 09, 2015, 05:22:46 AM
Heard some interesting things about this coins and I'm definitely buying some
Also some nice accumulation going on.
Also some nice accumulation going on.
January 09, 2015, 12:49:54 AM
I just tested and it is up.
January 08, 2015, 10:07:27 PM
January 08, 2015, 08:21:38 PM
The trick with removing bind moved me forward. However, there is now a more serious error in python "No module named blake_hash". Btw, i tried your pool code on other coin daemons, it works just fine. Trying on debian wheezy if it's relevant.
I can't make the node public, i'm on 5 mbps DSL. I doubt it's enough, even though i have nice latency. The reason i want to put up a private node is cuz i'm in EU and have really bad pings to your overseas nodes.
Thanks
Progress!
Take a look in modules/blake_getpowhash - from there run "sudo python setup.py install" - this will compile and install the blake_hash module, and then you should be set to go.
P2Pool doesn't consume a huge amount of bandwidth - latency is the biggest killer.
Got it running finally!
http://p2plv.ditchyourip.com:51050/static/
Located in EU (Latvia). Fee is 0.5% plus 0.5% for p2pool dev.
Both router and server are on 1.5KVA UPS, uptime 5 months.
My local miners, scattered across a couple of garages in country, get 4-5% less rejects, compared to US and NZ nodes, thanks to low latency
Great to hear. I've added your node to the headers on my two nodes and to http://unitus.info/services
If anyone else would like to add a node, please clone https://github.com/nzsquirrell/p2pool-nzs, install the blake_hash module, and let me know the public address so I can add it to the list. The more nodes we get the stronger it will be, and each miner can be configured to use another node as a backup pool in case of primary node failure (payout remains the same despite which node you mine at - all nodes work together cooperatively).
Lastly, we have approx. 50% of the blake hashrate now, let's see if we can bump this up closer to 100%
January 08, 2015, 07:54:39 PM
I haven't received any coins from http://uk.p2pool.geek.nz:5567 for 5 hours.
Pool is up, my miner is working. Is this just my problem or...?
Pool is up, my miner is working. Is this just my problem or...?
Fixed now with a bit of luck, we had the same problem on the skein network a couple of days back that was causing block submission to fail, yet p2pool still reports the blocks as valid.
January 08, 2015, 07:40:01 PM
Please elaborate?
January 08, 2015, 05:27:41 PM
January 08, 2015, 04:50:33 PM
Coin sounds very very good!
Not picking at all but this coin may get more fan base if the developer has a logo design contest or something.
The logo is o.k. but can be better.
January 08, 2015, 10:48:38 AM
The trick with removing bind moved me forward. However, there is now a more serious error in python "No module named blake_hash". Btw, i tried your pool code on other coin daemons, it works just fine. Trying on debian wheezy if it's relevant.
I can't make the node public, i'm on 5 mbps DSL. I doubt it's enough, even though i have nice latency. The reason i want to put up a private node is cuz i'm in EU and have really bad pings to your overseas nodes.
Thanks
Progress!
Take a look in modules/blake_getpowhash - from there run "sudo python setup.py install" - this will compile and install the blake_hash module, and then you should be set to go.
P2Pool doesn't consume a huge amount of bandwidth - latency is the biggest killer.
Got it running finally!
http://p2plv.ditchyourip.com:51050/static/
Located in EU (Latvia). Fee is 0.5% plus 0.5% for p2pool dev.
Both router and server are on 1.5KVA UPS, uptime 5 months.
My local miners, scattered across a couple of garages in country, get 4-5% less rejects, compared to US and NZ nodes, thanks to low latency
0.89%, was the same 5-9%
January 08, 2015, 07:06:57 AM
The trick with removing bind moved me forward. However, there is now a more serious error in python "No module named blake_hash". Btw, i tried your pool code on other coin daemons, it works just fine. Trying on debian wheezy if it's relevant.
I can't make the node public, i'm on 5 mbps DSL. I doubt it's enough, even though i have nice latency. The reason i want to put up a private node is cuz i'm in EU and have really bad pings to your overseas nodes.
Thanks
Progress!
Take a look in modules/blake_getpowhash - from there run "sudo python setup.py install" - this will compile and install the blake_hash module, and then you should be set to go.
P2Pool doesn't consume a huge amount of bandwidth - latency is the biggest killer.
Got it running finally!
http://p2plv.ditchyourip.com:51050/static/
Located in EU (Latvia). Fee is 0.5% plus 0.5% for p2pool dev.
Both router and server are on 1.5KVA UPS, uptime 5 months.
My local miners, scattered across a couple of garages in country, get 4-5% less rejects, compared to US and NZ nodes, thanks to low latency
January 08, 2015, 06:08:03 AM
I haven't received any coins from http://uk.p2pool.geek.nz:5567 for 5 hours.
Pool is up, my miner is working. Is this just my problem or...?
Pool is up, my miner is working. Is this just my problem or...?
January 08, 2015, 04:53:07 AM
What kind of hash rate should an i7 Haswell be pulling per thread. 4790k Yescrypt?
January 08, 2015, 02:04:13 AM
a lot of Rejected Hashrate - 5-7%. How to reduce?
January 07, 2015, 11:49:43 PM
Anyone equipped with some mining math want to work out what the break even price is ATM for Unitus?? 
This may help answer -> http://unitus.info/calculator
Jump to: