Unofficial BITMINE CoinCraft series 28nm ASIC miners thread - page 22.

giorgiotheclown

full member

Activity: 168

Merit: 100

Quote from: Keefe on March 07, 2014, 06:53:17 PM

Get lost clown.

Also, does anyone have a recommendation for something like the kill-a-watt for 240v circuits in the US?

go mining with your desk! lol

Keefe

hero member

Activity: 681

Merit: 500

Also, does anyone have a recommendation for something like the kill-a-watt for 240v circuits in the US?

giorgiotheclown

full member

Activity: 168

Merit: 100

Quote from: Keefe on March 07, 2014, 06:36:14 PM

My 1TH Desk arrived today, but it's damaged:
* The back-right-top corner of the case is slightly crushed, which is no big deal by itself.
* The 5 modules inside were wobbling side to side, which damaged the headers on the red connector board that supplies the data lines from the mainboard. Many of those header pins are bent, but I can probably bend them back.
* The corresponding socket on one of the modules is half broken off. All the solder joints one one side of that socket are broken, but I can probably resolder them, as the pads weren't pulled off.
* Some of the small heatsinks for the tops of the chips had fallen off two of the modules and were banging around in the case. I haven't yet found damage caused by that yet though. But how do I reattach those heatsinks? It looks like they were attached by thermal adhesive.

I think I can fix most of the damage myself, but what should I buy for reattaching those heatsinks to the chips?

nice construction kit

Keefe

hero member

Activity: 681

Merit: 500

My 1TH Desk arrived today, but it's damaged:
* The back-right-top corner of the case is slightly crushed, which is no big deal by itself.
* The 5 modules inside were wobbling side to side, which damaged the headers on the red connector board that supplies the data lines from the mainboard. Many of those header pins are bent, but I can probably bend them back.
* The corresponding socket on one of the modules is half broken off. All the solder joints one one side of that socket are broken, but I can probably resolder them, as the pads weren't pulled off.
* Some of the small heatsinks for the tops of the chips had fallen off two of the modules and were banging around in the case. I haven't yet found damage caused by that yet though. But how do I reattach those heatsinks? It looks like they were attached by thermal adhesive.

I think I can fix most of the damage myself, but what should I buy for reattaching those heatsinks to the chips?

psycho-pass

newbie

Activity: 42

Merit: 0

Quote from: Wolke on March 07, 2014, 03:14:21 PM

Quote from: monsters4r on March 07, 2014, 12:00:52 PM

I was happy to wake up from a nightmare called 2weeks™ BFL and now I'm into nighmare called NextWeek™ Bitmine. Roll Eyes

Give me a punch in the face if I try to preorder again a miner. Angry

thats my last preorder too--> never never again....

+1 same

Wolke

legendary

Activity: 966

Merit: 1000

Quote from: monsters4r on March 07, 2014, 12:00:52 PM

I was happy to wake up from a nightmare called 2weeks™ BFL and now I'm into nighmare called NextWeek™ Bitmine. Roll Eyes

Give me a punch in the face if I try to preorder again a miner. Angry

thats my last preorder too--> never never again....

giorgiotheclown

full member

Activity: 168

Merit: 100

Quote from: monsters4r on March 07, 2014, 12:00:52 PM

I was happy to wake up from a nightmare called 2weeks™ BFL and now I'm into nighmare called NextWeek™ Bitmine. Roll Eyes

Give me a punch in the face if I try to preorder again a miner. Angry

http://www.youtube.com/watch?v=F2_oFE9ovNk

me2. how could we be so stupid and send money to giorgio.

only petamine and giorgio profit...
http://eligius.st/~wizkid057/newstats/userstats.php/1PETAmNrgdzx3FwzJPNuhx18JVKdGtwWt6

cui bono! cui bono!

monsters4r

full member

Activity: 131

Merit: 100

I was happy to wake up from a nightmare called 2weeks™ BFL and now I'm into nighmare called NextWeek™ Bitmine. Roll Eyes

Give me a punch in the face if I try to preorder again a miner. Angry

solidsnake_

newbie

Activity: 19

Merit: 0

Do you mean also the RIG?

RetroGamer

member

Activity: 92

Merit: 10

Hey guys

we just got the info from Christian A.
that we could pick up our miner tomorrow at 10am.

see u

coolitec

newbie

Activity: 5

Merit: 0

i hate the marketing of them, the person who ordered first pay the full price, everyone who ordered later, got a free express shipping and 20% off.

bad marketing

silver71

member

Activity: 101

Merit: 10

no avatar for now

Quote from: zefir on March 06, 2014, 03:38:00 AM

Quote from: ?? on ??

Maybe Zefir will know more. Zefir, any updates on sw or hw?

SW is ready, I have one Rig board in hand running stable for days. HW is also ready, but did not pass long term stability tests. EE folks are working to bypass observed issues.

As for the over-clocking / turbo-mode: guys, no need to speculate - as I wrote several times, trubo mode is doable on chip or board basis, but is controllable on a product basis only to the extent that is already supported by FW (25% overclocking). I could post here what is required to drive a single board to 40-50% higher hashrates, but trying that would void your warranty. Seriously, it is not worth it.

What about DC wiring ? What was that all about and how can we help ?

baros008

member

Activity: 78

Merit: 10

Photos of my miners, after initial setup they work stable for 2 days.

solidsnake_

newbie

Activity: 19

Merit: 0

Hi Guys,

I'm thinking to ask for a refund, I waited until now because I was quite sure to have a chance to get the roi, at the moment I'm thinking that would be better.
There's anyone who asked for refund?
Anyone know the time for a refund?

I paid via wire transfer...

Wolke

legendary

Activity: 966

Merit: 1000

@ retrogamer

please make photos of their warehouse....

tranquille

full member

Activity: 127

Merit: 100

Quote from: RetroGamer on March 07, 2014, 05:40:11 AM

I drive going on today in the afternoon and Switzerland'm going to visit bitmine
let's see if I get my miner

Very nice RetroGamer!!
Get things going - they have robbed us first customers and I don´t want to hear any noob telling me to stay calm or wait and see who himself ordered maybe 1 or 2 miners of 2nd or 3rd batch.

To them I can only say that very likely you´re not going to be profitable anyways - unless the exchange rate goes up drastically. So maybe that´s the reason for few in here to stay calm.

tranquille

full member

Activity: 127

Merit: 100

Quote from: Biterfly on March 07, 2014, 05:13:21 AM

Econsumer.org

This online complaint section is supported by EU for all member states. Shocked

Domain is parked?

rmb2u

newbie

Activity: 41

Merit: 0

Quote from: RetroGamer on March 07, 2014, 05:40:11 AM

I drive going on today in the afternoon and Switzerland'm going to visit bitmine
let's see if I get my miner

Good Luck! Did they confirm that the miners were ready ?

RetroGamer

member

Activity: 92

Merit: 10

I drive going on today in the afternoon and Switzerland'm going to visit bitmine
let's see if I get my miner

Biterfly

newbie

Activity: 19

Merit: 0

Econsumer.org

This online complaint section is supported by EU for all member states. Shocked

Topic: Unofficial BITMINE CoinCraft series 28nm ASIC miners thread - page 22. (Read 202952 times)