[UPDATE] RX480 (Ref) 31+Mh, Custom Rom - VDDC OFFSET + Custom timing - page 4.

Truthchanter

sr. member

Activity: 689

Merit: 253

Quote from: batko on April 03, 2017, 03:02:16 AM

i have 7x Rx 480 4 Gb Nitro+ rig, Elpida memory 1140/2025 - 0.85-0.88v =210Mhs --955-960w
Superflower 1600w Gold
H81 BTC pro
G1840
8Gb RAM

Which strap are you using for elpida? if its custom do you know which strap it was based off of? (or can you copy it from polaris bios editor if you don't mind? haven't trouble getting my elpidas any higher than hynix at 1950 or so)

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Walrusbonzo on April 03, 2017, 02:30:04 AM

Quote from: bitkuna on April 02, 2017, 11:56:34 PM

Tired of setting each card voltage?
Offset not availible in Your bios?

I lowered the voltage by setting the top gpu voltage to P4 or P5 (65286 or 65285) in polaris. So You get automatic a low energy high hash rate without too many try and error per card.

Polaris GPU table:
1000 65284
1050 65285
1075 65286
1100 65286
1125 65286

Set memory voltage in WattTool to 900 or lower as the low limit for VDDC.

Gives 1060W from the wall for a 7x RX480 rig @204MH/s. More MH by tuning each card's clock.

You should be able to do better than that. I've got a 7 RX480 rig pulling 207mh/s, each card at 1125/2050, pulling just 940w from the wall. I haven't even tried lowering the memory voltage.

You can't lower the memory voltage.

batko

full member

Activity: 169

Merit: 100

i have 7x Rx 480 4 Gb Nitro+ rig, Elpida memory 1140/2025 - 0.85-0.88v =210Mhs --955-960w
Superflower 1600w Gold
H81 BTC pro
G1840
8Gb RAM

Walrusbonzo

hero member

Activity: 682

Merit: 500

Quote from: bitkuna on April 02, 2017, 11:56:34 PM

Tired of setting each card voltage?
Offset not availible in Your bios?

I lowered the voltage by setting the top gpu voltage to P4 or P5 (65286 or 65285) in polaris. So You get automatic a low energy high hash rate without too many try and error per card.

Polaris GPU table:
1000 65284
1050 65285
1075 65286
1100 65286
1125 65286

Set memory voltage in WattTool to 900 or lower as the low limit for VDDC.

Gives 1060W from the wall for a 7x RX480 rig @204MH/s. More MH by tuning each card's clock.

You should be able to do better than that. I've got a 7 RX480 rig pulling 207mh/s, each card at 1125/2050, pulling just 940w from the wall. I haven't even tried lowering the memory voltage.

bitkuna

newbie

Activity: 33

Merit: 0

Tired of setting each card voltage?
Offset not availible in Your bios?

I lowered the voltage by setting the top gpu voltage to P4 or P5 (65286 or 65285) in polaris. So You get automatic a low energy high hash rate without too many try and error per card.

Polaris GPU table:
1000 65284
1050 65285
1075 65286
1100 65286
1125 65286

Set memory voltage in WattTool to 900 or lower as the low limit for VDDC.

Gives 1060W from the wall for a 7x RX480 rig @204MH/s. More MH by tuning each card's clock.

Walrusbonzo

hero member

Activity: 682

Merit: 500

Quote from: coinzoid on April 01, 2017, 01:23:23 PM

Quote from: Walrusbonzo on April 01, 2017, 01:06:23 PM

I'm more than happy to do this for you if you provide me with the BIOSes you want editing and what voltage offset you want setting for each. Just make sure you provide me with the BIOSes that already have an offset so that I can amend it, adding in an offset for a BIOS where the offset does not exist is too much of a ball ache for me to be bothered with.

Well, I have used Jukebox Low Power bioses and not sure if they already contain a base offset.

Share it somewhere, I can soon look.

coinzoid

sr. member

Activity: 476

Merit: 250

Quote from: Walrusbonzo on April 01, 2017, 01:06:23 PM

I'm more than happy to do this for you if you provide me with the BIOSes you want editing and what voltage offset you want setting for each. Just make sure you provide me with the BIOSes that already have an offset so that I can amend it, adding in an offset for a BIOS where the offset does not exist is too much of a ball ache for me to be bothered with.

Well, I have used Jukebox Low Power bioses and not sure if they already contain a base offset.

Walrusbonzo

hero member

Activity: 682

Merit: 500

Quote from: coinzoid on March 27, 2017, 03:50:22 PM

Quote from: Eliovp on March 27, 2017, 10:33:20 AM

VDDC Offset + Basic Custom timing
------------------
Here's a nice update for those who have Reference cards.
In the package included, i've put 4 roms with VDDC offset.
1. -50mV
2. -69mV
3. -81mV
4. -100mV

You can of course adjust these however you want, if you want to have an even tighter undervolt you can search the rom for this --> "8D 00 F8 00" and replace the F8 part with EE(-112) for example.

These roms also have a custom timing included. It's a basic one but it will give you a very high increase for XMR.

Greetings and have fun!

Link: Here

"Also posted this in the op".

How about non-ref cards? I have Sapphire RX480 Nitro's and would like to automate the task of -120 through bios. Currently undervolting my cards via Trixx and cards with lower Asics quality even work fine with -160. Claymore commands didn't detect more than -100 so if possible I'd like to add specific downvolt values for each card's bios manually and flash them afterwards.

I'm more than happy to do this for you if you provide me with the BIOSes you want editing and what voltage offset you want setting for each. Just make sure you provide me with the BIOSes that already have an offset so that I can amend it, adding in an offset for a BIOS where the offset does not exist is too much of a ball ache for me to be bothered with.

Walrusbonzo

hero member

Activity: 682

Merit: 500

Quote from: Eliovp on March 27, 2017, 10:33:20 AM

VDDC Offset + Basic Custom timing
------------------
Here's a nice update for those who have Reference cards.
In the package included, i've put 4 roms with VDDC offset.
1. -50mV
2. -69mV
3. -81mV
4. -100mV

You can of course adjust these however you want, if you want to have an even tighter undervolt you can search the rom for this --> "8D 00 F8 00" and replace the F8 part with EE(-112) for example.

These roms also have a custom timing included. It's a basic one but it will give you a very high increase for XMR.

Greetings and have fun!

Link: Here

"Also posted this in the op".

Thanks for sharing, very useful for my sole reference card!

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: citronick on March 28, 2017, 10:50:34 PM

Quote from: Eliovp on March 28, 2017, 11:00:28 AM

Quote from: matmator on March 28, 2017, 10:40:41 AM

@eliovp: hello

With your 4 new bios the hasrate ethereum is optimized?

thx

Best thing you could do is try it.

I can only guarantee a significant raise in hashrate for XMR.

ETH speed will most likely be up a bit as well.

Greetings

I am currently using 28lowpowerOK rom.

Working nicely for many months on Sapphire 480 Reference rigs. Decent hash and low heat and power.

What percentage improvement for ETH and XMR?

Worth it to upgrade?

wow ... XMR really got a good boost.

my 6xGPU XMR around 3.4-3.7Kh/s with "28MHlowenergyOK" -- great for ETH btw.
now with -100mV..... 4.1-4.7Kh/s ! Pretty good update this Eliovp - well done.
I wonder how it performs on ETH mining.

The B1 Panda btw, on XMR is at 6.4-6.6Khs with your custom rom.

doktor83

hero member

Activity: 2548

Merit: 626

Quote from: Eliovp on March 27, 2017, 10:33:20 AM

VDDC Offset + Basic Custom timing
------------------
Here's a nice update for those who have Reference cards.
In the package included, i've put 4 roms with VDDC offset.
1. -50mV
2. -69mV
3. -81mV
4. -100mV

You can of course adjust these however you want, if you want to have an even tighter undervolt you can search the rom for this --> "8D 00 F8 00" and replace the F8 part with EE(-112) for example.

These roms also have a custom timing included. It's a basic one but it will give you a very high increase for XMR.

Greetings and have fun!

Link: Here

"Also posted this in the op".

This is global vddc offset ?

zeftcool

newbie

Activity: 6

Merit: 0

anybody know register vddc offset for saphire nitro rx 480?
i try 8D 00 ** 00 it just work for my nitro+ and not work for nitro.
they both are different card..
http://sapphirenitro.sapphiretech.com/en/480-4.html
http://sapphirenitro.sapphiretech.com/en/rx-480-4.html

CharlieCox

member

Activity: 212

Merit: 12

Quote from: midas28 on March 31, 2017, 05:37:40 AM

Is there a linux tutorial to flash the rom

Not sure if I can post links, but this is it basically:
https://www.techpowerup.com/articles/overclocking/vidcard/34/8

To backup: sudo atiflash -s 0 oldbios.rom (where 0 represents the card, 0 is the first card on your motherboard)
To write the new bios: sudo atiflash -p 0 newbios.rom

midas28

newbie

Activity: 23

Merit: 0

Is there a linux tutorial to flash the rom

Truthchanter

sr. member

Activity: 689

Merit: 253

Can a voltage offset (either through bios or something like WattTool) yield lower power consumption than just setting the undervolt to the same low value the offset would be at?

Otherwise, besides it being in the bios. I don't see much of a point to using an offset

zeftcool

newbie

Activity: 6

Merit: 0

8D 00 ** 00
only work for my IR3567B card
it's not work for my other refference card

matmator

sr. member

Activity: 487

Merit: 252

bou !

Yes maybe i will have to test with eth only

Would you have a bios to propose for rx 480nitro + oc?

Eliovp

legendary

Activity: 1050

Merit: 1293

Huh?

Quote from: matmator on March 28, 2017, 03:27:32 PM

bsod directly with your bios -100mv.

(dual mining ) eth+pasc

Blue screen :p, that's a driver issue..

After you flash this rom make sure you completely turn off your power (the voltage controller has to be reprogrammed).

It's even best to first run DDU and reinstall drivers, this isn't necessary but in some cases it can help.

+ Dual mining with a -100mV undervolt .. Roll Eyes

citronick

legendary

Activity: 1834

Merit: 1080

---- winter*juvia -----

Quote from: Eliovp on March 28, 2017, 11:00:28 AM

Quote from: matmator on March 28, 2017, 10:40:41 AM

@eliovp: hello

With your 4 new bios the hasrate ethereum is optimized?

thx

Best thing you could do is try it.

I can only guarantee a significant raise in hashrate for XMR.

ETH speed will most likely be up a bit as well.

Greetings

I am currently using 28lowpowerOK rom.

Working nicely for many months on Sapphire 480 Reference rigs. Decent hash and low heat and power.

What percentage improvement for ETH and XMR?

Worth it to upgrade?

Truthchanter

sr. member

Activity: 689

Merit: 253

Eliovp and others, are you currently or have been mining xmr instead of eth?

Topic: [UPDATE] RX480 (Ref) 31+Mh, Custom Rom - VDDC OFFSET + Custom timing - page 4. (Read 231045 times)